What is parameter COd used for on the ATV28 ?
This code is used if you want to enter a password so you can limit the access to the drive parameters.
This parameter can only be seen and accessed using a remote display module or PC software.
Access code: 0 to 9999. Value 0 (factory setting) does not prevent access. All other values lock access to the SEt-, drC- and I-O menus.
To lock access to the drive controller, the code can be incremented using up and down arrow keys then saved using (ENT) key.
To aaccess the menus on a drive controller which is locked by a code, the code cand be incremented using up and down arrow keys and confirmed with (ENT) key.