No unfortunately this part is not available.
Clarification: not the 10MP.
In theory any panel thickness less than 3.8mm will suit
Hole size is 35.7mm diameter.
What would cause the assembly 106 and 107 I/0 tables in somove to reset to default after closing out somove and or power cycling the ATV930 drive?
Somove and ATV930
assemblies 106 and 107 are not supported
Assemblies 106 and 107 are only supported in Somove and not the Drive so the drive will not retain the settings and will reset back to default after power cycle or if you open up somove again and copy from drive to PC.
Issue: Part numbers
Product Line: BMH
The part number for the power cable for a BMH1003 xxxxxx motor is VW3 M5101 Rxxx . where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(4 x 1.5 mm^2) + (2 x 1 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and free ends on the drive side.
The part number for the feedback cable for a BMH1003 xxxxxx motor is VW3 M8102 Rxxx where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(3 x 2 x 0.14 mm^2) + (2 x 0.34 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and an RJ45 style connector on the drive side.
PIR: 360° circular, adjustable up to Φ8m
US: 360°, adjustable up to 10m x 16m, it’s an oval shape, at the height of 2.5 m
The connector is an M8 4 pin female connector
XZCPV0941L2 for a straight connector with PVC cable
XZCPV1041L2 for an angled connector with PVC cable
XZCP0941L2 for a straight connector with PUR cable for severe environments
XZCPA0941L2 for a straight connector for food & beverage applications
(change L2 to L5 or L10 for 5 or 10m cables)
See attached data sheet
The alarm status's are stored in registers 5771-5778 with each alarm set to a bit indexed from zero. For example, if one needed to determine if the over current alarm for phase A was active you would read register 5771 and look to bit zero. If the register reading program is not capable of displaying binary (bit level) information, the information may be entered into the Windows calculator and converted from decimal to binary.
Alarm No. Alarm Description
01 Over Current Phase A
02 Over Current Phase B
03 Over Current Phase C
04 Over Current Neutral
05 Over Current Ground
06 Under Current Phase A
07 Under Current Phase B
08 Under Current Phase C
09 Current Unbalance Phase A
10 Current Unbalance Phase B
11 Current Unbalance Phase C
12 Phase Loss, Current
13 Over Voltage Phase A
14 Over Voltage Phase B
15 Over Voltage Phase C
16 Over Voltage Phase A-B
17 Over Voltage Phase B-C
18 Over Voltage Phase C-A
19 Under Voltage Phase A
20 Under Voltage Phase B
21 Under Voltage Phase C
22 Under Voltage Phase A-B
23 Under Voltage Phase B-C
24 Under Voltage Phase C-A
25 Voltage Unbalance A
26 Voltage Unbalance B
27 Voltage Unbalance C
28 Voltage Unbalance A-B
29 Voltage Unbalance B-C
30 Voltage Unbalance C-A
31 Voltage Loss (Loss of A, B, or C, but not all)
32 Over kVA 3-Phase Total
33 Over KW Into the Load 3-Phase Total
34 Over KW Out of the Load 3-Phase Total
35 Over kVAR Into the Load 3-Phase Total
36 Over kVAR Out of the Load 3-Phase Total
37 Over Current Demand Phase A
38 Over Current Demand Phase B
39 Over Current Demand Phase C
40 Over Current Demand 3-phase Total
41 Over Frequency
42 Under Frequency
43 Lagging True Power Factor
44 Leading True Power Factor
45 Lagging Displacement Power Factor
46 Leading Displacement Power Factor
47 Suspended Sag/Swell
49 Over Value THD Current Phase A
50 Over Value THD Current Phase B
51 Over Value THD Current Phase C
52 Over Value THD Voltage Phase A-N
53 Over Value THD Voltage Phase B-N
54 Over Value THD Voltage Phase C-N
55 Over Value THD Voltage Phase A-B
56 Over Value THD Voltage Phase B-C
57 Over Value THD Voltage Phase C-A
58 Over K-Factor Phase A 1071 Tenths % A
59 Over K-Factor Phase B 1072 Tenths % A
60 Over K-Factor Phase C
61 Over Predicted kVA Demand
62 Over Predicted KW Demand
63 Over Predicted kVAR Demand
64 Over kVA Demand Level 1
65 Over kVA Demand Level 2
66 Over kVA Demand Level 3
67 Over kW Demand Level 1
68 Over KW Demand Level 2
69 Over KW Demand Level 3
70 Over kVAR Demand
71 Over Lagging 3-phase Avg. Power Factor
72 Under 3-Phase Total Real Power
73 Over Reverse 3-Phase Power
74 Phase Reversal
75 Status Input 1 Transition from Off to On
76 Status Input 2 Transition from Off to On
77 Status Input 3 Transition from Off to On
78 Status Input 4 Transition from Off to On
79 Status Input 5 Transition from Off to On
80 Status Input 6 Transition from Off to On
81 Status Input 7 Transition from Off to On
82 Status Input 8 Transition from Off to On
83 Status Input 1 Transition from On to Off
84 Status Input 2 Transition from On to Off
85 Status Input 3 Transition from On to Off
86 Status Input 4 Transition from On to Off
87 Status Input 5 Transition from On to Off
88 Status Input 6 Transition from On to Off
89 Status Input 7 Transition from On to Off
90 Status Input 8 Transition from On to Off
99 End of Incremental Energy Interval
101 End of Demand Interval
102 End of Update Cycle
103 Over Analog Input Channel 1
104 Over Analog Input Channel 2
105 Over Analog Input Channel 3
106 Over Analog Input Channel 4
107 Under Analog Input Channel 1
108 Under Analog Input Channel 2
109 Under Analog Input Channel 3
110 Under Analog Input Channel 4
201 Voltage Swell A-N/A-B
202 Voltage Swell B-N
203 Voltage Swell C-N/C-B
204 Current Swell Phase A
205 Current Swell Phase B
206 Current Swell Phase C
207 Current Swell Neutral
208 Voltage Sag A-N/A-B
209 Voltage Sag B-N
210 Voltage Sag C-N/C-B
211 Current Sag Phase A
212 Current Sag Phase B
213 Current Sag Phase C
214 Current Sag Neutral
Legacy KB System (APS) Data: RESL209554 V1.0, Originally authored by MaTh on 11/02/2012, Last Edited by MaTh on 11/02/2012
Related ranges: CM2000 series
438L - Socket PVD 10A suit 1mm ord.duty flex, rnd Earth socket.
We speak about 100m in free field, we can guaranty a well functioning at 50m in industrial applications, actually it depends mainly of where the system is installed, for the moment no customer is complying about low range.
RF Range (line of sight) will be: 100m free air, 30m indoors
ATV630 Process drive with Ethernet IP option card how do you set it up to use assemblies 103 and 104?
Altivar ATV630 ATV650 ATV660 etc
They needs to set up the ATV630 drive with the optional Ethernet IP card to use assemblies 103 and 104.
The ATV630 Ethernet IP card VW3A3720 does not support assemblies 103 and 104. You will have to configure your PLC's Ethernet Scanner module for assemblies 100 and 101.
The part code is PDL 953/15
No not available
Please note this product is being phased out
This proximity Sensor requires a 4 pin M12 female connector, the item required will depend on the environment.
The part code for a 4 pin M12 pre wired female straight connector with PVC flex is XZCPV1141L5 (angled option = XZCPV1241L5)
The part code for a 4 pin M12 pre wired female straight connector with PUR flex for severe environments is XZCP1141L5
The part code for a 4 pin M12 pre wired female straight connector for food & beverage applications is XZCPA1141L5 (ANGLED OPTION = XZCPA1164L5)
2 or 10m options may also be available
See attached data sheet
A user may want to know the length of the display cable provided with the PM5563RD meter or PM5RD remote display kit
PM5000 series meters
The PM5563 (complete part number METSEPM5563RD), is provided with a display cable 3 meters long.
The same 3 meters cable is provided with the PM5000 remote display kit (complete part number for that kit is METSEPM5RD)
The part number for the 3 meter display cable is METSEPM5CAB3.
Other display cable lengths are available:
METSEPM5CAB03 - 0.3m Length Cable Kit
METSEPM5CAB1 - 1m Length Cable Kit
METSEPM5CAB10 - 10m Length Cable Kit
Standard Active Silver Caps are not able to be purchased on their own. The only caps available for the range is the labelled cap pack which also comes with 10x blank Cat's Eye Caps. The part number for the Cap pack is 60PBC-3A.
No, 10 kA Potentiometer for the XACA range.
Unfortunately, this part is unavailable. we only offer a 10A version. The part number for the 10A version is 30HM.
The beam scans a 18m radius out from the sensor and around 110 degrees in an arc
The part number for a 108 pole Chassis for iC60C/B's for the MB switchboards is - C3251083
The part code is ML2025RC10
You can use 56SO310 +56CB4 + 56E3 + 4RCBE210/10
802.3 Network Compliance with Netbotz Version 1 Appliances
NetBotz version 1
Article Title: 802.3 Compliance for NIC Interface for NetBotz Version 1 Appliances
The following is a compliance letter for the 802.3 network interface on the NetBotz Version 1 Appliances.
NetBotz part number 02236 Rev 00 Letter of Compliance For WallBotz 310C/400C, RackBotz 310C/400C (NetBotz product numbers: NBWL0310C, NBWL0400C,NBRK0310C, NBRK0400C)
For the products listed above, NetBotz claims the following:
NetBotz uses Agere part LU3X31FT (Single-Port 3V 10/100 Ethernet Transceiver TX/FX). Agere’s datasheet for the LU3X31FT states that it “was designed from the beginning to conform fully with all pertinent specifications, from the ISO*/IEC 11801 and EIA/TIA 568 cabling guidelines to ANSI X3.263 TP-PMD to IEEE 802.3 Ethernet specifications” and has “IEEE 802.3u Clause 28 compliant auto-negotiation for full 10M and 100M control” and also has an “IEEE 802.3 compatible 10Base-T and 100Base-T physical layer interface and ANSI X3.263 TP-PMD compatible transceiver.”
NetBotz followed Agere’s design and implementation recommendations with respect to the LU3X31FT
ISO is a registered trademark of The International Organization for Standardization. EIA is a registered trademark of The Electronic Industries Association. ANSI is a registered trademark of The American National Standards Institute, Inc. IEEE is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc.
You can purchase a 955RW, BALS211 + 56CR310 + flex
Yes, the part number is 30M is a -3A.
You can use RG6 and a max length of 100m
No it is not. Twido PLC software will only be compatible with Windows 7.
1mm - 2.5mm
No, XBTL1000 does not support Windows 10. It is suggested to use a Virtual Machine running Windows xP or Windows 7 if you only have a Windows 10 PC.
ConneXium Ethernet Communication Cables with Rugged RJ45 Connectors
Connexium Ethernet Cables
A new range of Ethernet Communication Cables with Rugged RJ45 Connectors
(First customer order date of May 25, 2012)
Ethernet Cable 1M Cat 5E w/RJ45 CE
Ethernet Communication Cable, 1 meter long, Cat 5E with 2 RJ45 Rugged Connectors - CE Standard
Ethernet Cable 1M Cat 5E w/RJ45 UL
Ethernet Communication Cable, 1 meter long, Cat 5E with 2 RJ45 Rugged Connectors UL Standard
Ethernet Cable 2M Cat 5E w/RJ45 CE
Ethernet Communication Cable, 2 meter long, Cat 5E with 2 RJ45 Rugged Connectors - CE Standard
Ethernet Cable 2M Cat 5E w/RJ45 UL
Ethernet Communication Cable, 2 meter long, Cat 5E with 2 RJ45 Rugged Connectors UL Standard
Ethernet Cable 3M Cat 5E w/RJ45 CE
Ethernet Communication Cable, 3 meter long, Cat 5E with 2 RJ45 Rugged Connectors - CE Standard
Ethernet Cable 3M Cat 5E w/RJ45 UL
Ethernet Communication Cable, 3 meter long, Cat 5E with 2 RJ45 Rugged Connectors UL Standard
Ethernet Cable 5M Cat 5E w/RJ45 CE
Ethernet Communication Cable, 5 meter long, Cat 5E with 2 RJ45 Rugged Connectors - CE Standard
Ethernet Cable 5M Cat 5E w/RJ45 UL
Ethernet Communication Cable, 5 meter long, Cat 5E with 2 RJ45 Rugged Connectors UL Standard
Ethernet Cable 10M Cat 5E w/RJ45 CE
Ethernet Communication Cable, 10 meter long, Cat 5E with 2 RJ45 Rugged Connectors - CE Standard
Ethernet Cable 10M Cat 5E w/RJ45 UL
Ethernet Communication Cable, 10 meter long, Cat 5E with 2 RJ45 Rugged Connectors UL Standard
Modsoft error 109 ""PLC returned undefined exception" when trying to go online to the PLC is usually caused by the PLC being in "Kernel" mode (Run light flashing). Cycle power on the PLC and if the Run light still flashes, download the executive firmware to see if you can get the Run light to stop flashing.
Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.
Yes the part number is 56SO332/6LE
In the Clipsal range 10mA rated RCBO 10A, 16A,20A,32A, and 40A
Also Slimline RCBO 10mA rated RCBO 6A, 10A,16A,20A,25A, 32A
Please see attachment for codes
No, there are no 10mA RCCBs, only the 2 pole 10mA Slimline RCBOs.
The part number for 20amp 10ma single module RCD/MCB is a 4RCBE220/10S.
The alarm log is a circular buffer. It means that, once it filled up, new alarm events will overwrite the oldest alarm events. For example, if your alarm log size is set to 100 records, it will work like this:
- events 1 to 100 will fill up the alarm log.
- event 101 will overwrite event 1.
- event 102 will overwrite event 2.
- event 199 will overwrite event 99.
- event 200 will overwrite event 100.
- event 201 will overwrite event 101.
Legacy KB System (APS) Data: RESL183431 V1.0, Originally authored by MiMe on 04/10/2007, Last Edited by MiMe on 04/10/2007
Related ranges: Vijeo Designer
No the only 10mA RCBO's that we have are within the clipsal range
No there is no 10mA RCBO's with in the multi 9 range
We have no 10mA RCCBs available