Auto Switch Socket Outlets, Mechanisms, 10A, Single Pole

White Electric | Auto Switch Socket Outlets, Mechanisms, 10A, Single Pole

Auto Switch Socket Outlets, Mechanisms, 10A, Single Pole

Item Number: 10M-WE

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Sustainable offer status

Green Premium product

Range of product

Standard Series

Product or component type

socket-outlet

Product brand

Clipsal

Physical

Marking

without marking

Local signalling

without light indicator

Device mounting

flush

Fixing mode

by screws

[In] rated current

10 A

[Ue] rated operational voltage

250 V AC

Depth

29 mm

Length

97 mm

Width

43 mm

Fixing center

84 mm

Number of poles

1

Standards

  • AS/NZS 3100
  • AS/NZS 3112
  • AS/NZS 3133:approval number S/1

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure

ENVPEP120506EN

Quantity per set

set of 1

Others

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

51.0 g

Package 1 Height

3.4 cm

Package 1 width

4.2 cm

Package 1 Length

9.5 cm

Unit Type of Package 2

CAR

Number of Units in Package 2

100

Package 2 Weight

5.9 kg

Package 2 Height

25 cm

Package 2 width

21.4 cm

Package 2 Length

33.8 cm

Unit Type of Package 3

BB1

Number of Units in Package 3

5

Package 3 Weight

295.0 g

Package 3 Height

7 cm

Package 3 width

9.2 cm

Package 3 Length

11.8 cm

Cover type

complete housing
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Specifications

  • Declaration of Conformity

  • Certificates (MSDS)

Frequently Asked Questions

hide show

How much current is available from the +10v dc power supply on the ATV61 and ATV71 drives?

Issue:
Current available on the +10v dc power supply

Product Line:
ATV61 and ATV71
 
Environment:
All models and serial numbers
 
Cause:
None
 
Resolution:
The available current on the +10v dc supply on the ATV61 and ATV71 drive is 10mA.
 

What is the replacement for a E03/30/10 RCD relay?

The replacement for a E03/30/10 RCD relay is a E03/10/10. The only difference is the E03/10/10 is 10mA instead of 30mA.
Some of the key features are:

  • With mounting bracket
  • Suitable for single to three phase applications
  • Amber load supply indicator
  • In-built test facility
  • -10 to +55 deg C Operating Temperature
  • 50-250 Ohms Load Range (shunt trip coil)

For more information see:https://www.clipsal.com/products/detail?CatNo=E03/10/10&backto=/search?q=E03&tab-document-1=0&itemno=E03/10/10
rcd relay 10ma 10ms 240v

What is the code for the new all in one Iconic timer mech?

The code for the new wiser switch mech is PDL356PB10MBTW-VW.

This can be configured to act as a time clock, timer, or standard push button.

For further information please visit www.pdl.co.nz/products/detail?CatNo=PDL356PB10MBTW


 

What is the replacement outlet for CFFB floor box?

The replacement outlet for the CFFB floor box is the 10MDP.

Some of the key features are:
  • Panel mount
  • Fascia: 42 mm Diameter
image.png
 
Please go to the following links below and check under the Documentation Tab for more information.

Australia - https://www.clipsal.com/products/detail?CatNo=10MDP&itemno=10MDP-WE&backto=/search?q=10MDP&tab-document-1=0
New Zealand - https://www.pdl.co.nz/products/detail?CatNo=10MDP&itemno=10MDP-WE&backto=/search?q=10MDP&tab-document-1=0

What are the technologies used in RCD?

Voltage Independent Technology
Residual current devices using Voltage Independent Technology can continue to operate in the event of a complete voltage loss or neutral break.

The residual current device consists of:
  • high magnetic performance core (ex: nanocristalline)
  • a high-sensitivity relay
  • an electronic interface analyzing the signal.
  • The toroid provides information on the leakage current and the power required to trip the device.
  • The electronic circuit and the relay are not connected to the electrical network. Power is provided only by the leakage current.
  • Even if there is an accidental break of the neutral conductor or a voltage drop, the entire electromechanical system will continue to operate, allowing the residual current device to trip.

Voltage Dependent Technology (with and without FE)
A voltage source is required to operate this technology.
For Schneider Electric residual current devices, earth fault protection is provided in the event of a voltage drops down to 50 V.

In the case of VDT technology ("Voltage Dependent Technology"), the toroid only provides information about the leakage current.
The power required for tripping is supplied by the electrical network.


"Voltage Dependent Technology" RCDs supplied via the FE (Functional Earth)
In the event of loss of supply (required to address the fault and trip), there are two categories of behavior:
  • Category 1: the RCD does not open and continuity of service is optimum, because the load is powered on when the voltage is restored, but the RCD is unable to operate if the loss of power supply is the result of a neutral break. The presence of line voltage is a hazard because the RCD is no longer able to perform its protection function in the event of contact with the line potential
 
  • Category 2: the RCD opens if there is loss of power supply (including in the event of neutral break). After the voltage is restored, the RCD must be reclosed to power on the load again.
To improve the level of protection provided by category 1 RCD, in the event of neutral breaking, the product is supplied by redundancy via the FE (line to FE supply instead of line to neutral), allowing it to continue to perform its protection function.
This configuration allows the behavior of VDT RCDs to be compared with that of VIT RCDs.
 
  • conformity with the standards is confirmed by a national conformity mark on the product. The mark is assigned by a third-party organization independent of Schneider Electric. This involves regular sampling at the production site to ensure continued conformity with the standards in question.
According to the standard requirements, all electrical equipment protected by VD with FE RCDs must be earthed to ensure maximum earthing resistance as follows:
  • Ue = 110 V: 50 ohm,
  • Ue = 230/240 V: 100 ohm.

Reference document - CA908066E

What are the different residual current device categories?

IEC 60755 describes general requirements for residual current operated protective devices.

Vigi modules (Vigi NG125, see example in the figure)
The add-on Vigi module is the most flexible residual current device (it is installed in combination with a circuit breaker).
Vigi are covered by the IEC 61009 and IEC 62423 series of standards.

Residual Current operated Circuit Breakers without integral overcurrent protection (RCCB) (Acti9 iID, see example in the figure)
The Acti 9 iID RCCB is the main residual current device in the facility and is used as the main incomer. RCCB are covered by the IEC 61008 and IEC 62423 series of standards.

Residual Current operated circuit Breakers with integral Overcurrent protection (RCBO) (Acti 9 iCV40N, see example in the figure)
RCBO = combination of circuit breaker and residual current device function in the same product. This can be obtained by combining the circuit breaker with its Add-on Vigi Module.
RCBO are covered by the IEC 61009 and IEC 62423 series of standards.

Socket RCD (SRCD) (see example in the figure) SRCD are covered by the IEC 62640 series of standards.

❺ Industrial type circuit breakers incorporating the RCD function must comply with Annex B of IEC 60947-2.
Residual current devices with a separate toroid are standardized in Annex M of IEC 60947-2.


Reference document - CA908066E
 
Show More