The part number for the wall clip suitable for large format Prestige P2000 plaes is 154/2.
The 154/2 is the clip to suit any Prestige large format plate 115mm x 115mm
The part number for the wall box is 164/2
The c clip that suits the P2033/2 switch is the 154/2.
Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.
Part number 156/2 can be used on all Prestige large format plates.
Standard 2 gang flush box will suit - part number 157/2
Yes the part number for the longer screws is a 355A. They are 50mm long apposed to the 355 which is 32mm long. Both screws are M3.5 X 0.8 Pitch.
The separator part code is 27001
Dimensions for part number 157/1 is a 94mm x 54mm x 39mm.
The mains switch is 15092
The wall box part number is 164/4
That bracket will suit the slimline, Saturn, ZEN and OneTouch series plates.
Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm
The part code is A9C30211
Obsolete and deleted. Use a SBIP2P-XX
The PDL 535F has been obsoleted as well
The part number for the wall box is 164/3
The part number for the wall box 164/5
The 164/4 which is the wall box to suit part number B8/30/4.
dimensions 188mm x 97mm x 58 mm
Part number 15222 is no longer available the alternative is the A9A15222.
Please use link for Data sheet:
Use a 2157H2
or a 2154H2 mounting bracket
What is the continuous current rating of a CA2K relay?
CTA-ID : 15484
There is no plastic box the same size as 164/3, you can use PDL144Mt side by side would do the same
The largest transformer that we have is 63VA - The part code is 15222
Dimensions of wall box 324mm x 97mm x 58mm Part no 164/7
No, The 154 is designed to suit up to 12mm and then the 154/1 suits from 19-25mm . If These are not suitable then 155 series may be used
Yes, the 224/2 floor outlet housing is still available.
Some of the key features are:
- 249 Length x 110 Width x 107 Depth mm dimension
- With 4 segregation barriers
- Suits 4 Standard plates
- 1 gang
- 84mm Mounting center
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=224/2
The dimensions of a 157/2F fire rated wall box is 94mm(H) X 97mm(W) X 47mm(D).