box wall 1gang fire rated

BOX WALL 1 GANG FIRE RATED. 157/1F REPLACES F157/1.

Catalogue Number: 157/1F
box wall 1gang fire rated
Colour:
Colour: Per UOM Std.
  • 1 PCE 1

Specifications

hide show
Range of product
Series 157
Product brand
Clipsal
Shape
rectangular
Number of gangs
1 gang
Cable entry number
9
Material
steel
Surface treatment
electro-galvanized
Length
95 mm
Width
84 mm
Depth
50 mm
Location of connection
rear
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)

Frequently Asked Questions

hide show

What is the dimension of 157/1F?

Dimension of 157/1F is 52mm (L) 95mm(W) 50mm(D) . Mounting centre is 84mm apart .

What are dimensions of 157/1?

Dimensions for part number 157/1 is a 94mm x 54mm x 39mm.

What is part number for gasket to suit 157/1F?

The part number is 157/1F-GASKET it is available as a special.

Can 157/1F be used with Slimline plate?

The 157/1F can be used however the box will need to be recessed atleast 8mm and sealed with Fire seal.

What are the dimensions on the 157/1F wall box?

The dimensions on the 157/1F wall box are 52mm(L) X 95mm(W) X 50mm(D).

what is the PDL equivelant for the 157/1F

The part number is PDL140F 

Does a standard 2025 fit the 157/1F?

Yes, yes it does.

Can the foam in 157/1F be purchased separately?

Part number 157/1F-GASKET is not a standard part can be supplied as a special.

What are the dimension for a 157/1F fire rated wallbox?

The dimension for a 157/1F fire rated wallbox are:
 
Length Width Depth Mounting Centres
52mm 95mm 50mm 84mm apart

 

What are the dimensions of a 157/2F fire rated wallbox?

The dimensions of a 157/2F fire rated wall box is 94mm(H) X 97mm(W) X 47mm(D).
 

Can the 157/1F be used in brick?

Yes, the157/1F replaces the F157/1 it can be used in both gyprock and masonary.

Some of the key features are:
  • 1 gang
  • Sliding nut
  • Adjustable 84 mm centres. Robust construction
  • High quality corrosion resistant finish
  • Ample knockouts
  • 1 and 2 hour fire rating - back to back
  • Acoustic rated up to STC50
  • Suitable for virtually any fire rated application
  • Sound transmission rating for virtually any application
  • For masonry walls

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/1F
 

Do you have an up to date test report on the 157/1F fire rated wall box?

Yes, please find attached document.

What is the Acoustical rating on 157/1F boxes?

Acoustically rated is up to STC50.
The sound transmission rating of these wall boxes makes them perfect for back to back installation in almost any location, including units, apartments, motels, hospitals and commercial premises.
 

Is there a template for the 157/1F wall box?

There is no template for the 157/1F.
The instructions show holding the box on the wall and drawing around it with a pencil.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/1F

Does Clipsal offer a fire rated wall box for the P2025/2?

Yes, part is 157/2F

Will ML2025RC10, Medilec RCD protected outlet fit into 157/1 wall box?

Yes, 157/1 can be used as a wallbox to install ML2025RC10.

For further information, please visit

157/1
https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/1


ML2025RC10
https://www.clipsal.com/Trade/Products/ProductDetail?catno=ML2025RC10

What is the galvanised flush box to suit BSL range for prison application

The part code is 157/1

Is the gasket in the 157/2F just for acoustic rating?

The gasket supplied with the 157/2F is used to achieve the acoustic and fire rating.

Some of the key features are:
  • Easy access for cables and conduits
  • Suitable for virtually any fire rated application
  • Sound transmission rating for virtually any application

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/2F
 
 

What is the part number for a fire rated wall box to take a standard switch?

The part number for a fire rated wall box that takes a standard switch is 157/1F.

What is the part number of fire rated wall box to suit clock point socket 408/3 and 408/4?

157/1F fire rated wall box will suit clock point socket  408/3 and 408/4.
For further information, please visit: https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/1F

What is the code for a flush box to suit the 408/3?

408/3 has 84mm mounting centres so can be mounted on standard clipsal flush box like the 157/1 for example.

Do you have a disposable cover for a 157/1 PRM wall box?

Yes, we do have a wall box spacer for the 157/1PRM wall box. The part number is SL2000WBS.

What is the part number of the fire rated wall box to suit large format (size 116 x 116mm) P2000, Prestige plates?

157/2F is the part number of the fire rated wall box to suit large format P2000, Prestige plates. 157/2F is 2 Gang Metal Fire Rated Wall Box, with sliding nuts for accurate alignment of accessory, for masonry walls. Suits 1 hour and 2 hour fire rated applications. Dimensions are 94mm (L) x 97mm (W)x 47mm (D). Mounting centers are 84mm x 46mm.

 

What wall box is required for the Metal plate range BSL25A-WE and BSL31VA-WE?

The 157/1 can be used, but ensure that the wall box is mounted 25mm from outer wall surface.

What fire rated wallbox would be used with the Prestige series ?

The  fire rated wall box that suits the prestige series would be the 157/2F.
Some of its key features are:
  • 2 gang
  • Sliding nut
  • Robust construction
  • High quality corrosion resistant finish
  • Ample knockouts
  • 1 and 2 hour fire rating - back to back
  • Acoustic rated up to STC50
  • Accessories easy to align. No distortion, even in the toughest conditions
  • Easy access for cables and conduits
  • Suitable for virtually any fire rated application
  • Sound transmission rating for virtually any application
  • For masonry walls
  • 84x46 mm mounting centres
  • Fire and acoustically rated
  • For masonry walls
  • Knockouts: 4 x 20, 2 x 25 Back, 2 x 20 LH Side, 2 x 25 RH Side
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/2F

 

What is the wall box for a P2033/2VA-WE

 Part code 157/2

L1JCN - What is the code for the flush box to suit 31/2VX-WE

157/2 wall box 2gang

- Does the 30USBCM fit into 2025XA and C2025XA

Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click  link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm

Is there a 154 C-clip that does thicker than 10mm plasterboard/ gyprock?

Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.

What is the flush box to suit the P2025/2?

Standard 2 gang flush box will suit -  part number 157/2

Do you have the a longer version of the standard mounting screws for your power points?

Yes the part number for the longer screws is a 355A. They are 50mm long apposed  to the 355 which is 32mm long. Both screws are M3.5 X 0.8 Pitch.

What bracket is used to suit the larger Prestige range.

The bracket would be the 156/2.
This is also available in a wall box version as a157/2.
Please see below documentation for more information.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=156/2

How to perform MSET on a BPH motor using Lexium 17/15 Servo Drive?



Issue:  Although the BPH motors that are used with the Lexium 17 and 15 range of Servo drives are factory MSET, occasionally there may be a need to MSET this in the field due to commutation error being reported. 


Product Line: Lexium BPH


Environment:


Cause: Due to an incorrect offset value set in the drive, the drive may report a F25, commutation error.


Resolution: This resolution discusses the MSET procedure for a BPH motor with a Lexium 17/15 series drive.

 
Proper commutation and position feedback are required to interface a particular servo drive and motor combination. When using Schneider Electric BPH motors and Lexium drives, this setup (or “characterization”) process has been completed and verified for the user at the factory. Occasionally there may be a need to MSET the BPH motor and this is detailed in this procedure.
 
Perform the following steps, as described, and in the order presented, to complete the MSET procedure. 
 
1.    Disconnect the Motor from the Mechanical Load
2.    Electrical Connections
A.   Verify that the required electrical connections for drive power, logic power, motor power and resolver are as described in the Lexium drive user manual.
B.   Apply 24VDC logic and AC input power to confirm proper drive startup sequence and self-checks.
 
 Follow this MSET procedure only if the drive firmware is ver 5.51 and above.
 
 Connect to the drive using Hyperterm…
 
  1. Type OPMODE followed by Enter – note down the Opmode (xx) the drive is set to.
 
  1. Type OPMODE 2 followed by Enter – switch to digital torque mode
     C.     Type 'EN' followed by Enter.

     D.     Type "Zero" followed by ENTER - Motor shaft will jump to nearest pole. MPHASE value is automatically set.
 
  
  1. Type SAVE
 
  1. Type OPMODE xx followed by enter ( where xx is the default value that was originally set for the application.)
 
     G.    Type COLDSTART (the drive will reboot)
This completes the MSET procedure.

Is there a C clip for 13mm gyprock as the 154 doesn't fit ?

No, The 154 is designed to suit  up to 12mm and then the 154/1 suits from 19-25mm . If These are not suitable then 155 series may be used