box wall 4g dbl ht concrete

BOX WALL 4G DBL HT CONCRETE

Catalogue Number: 162/4
box wall 4g dbl ht concrete
Colour:
Colour: Per UOM Std.
  • 1 PCE 1

Specifications

hide show
Range of product
Series 162
Product brand
Clipsal
Shape
rectangular
Number of gangs
8 gangs
Cable entry number
32
Material
steel
Surface treatment
electro-galvanized
Length
186 mm
Width
194 mm
Depth
58 mm
Location of connection
rear
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP110719EN
Circularity Profile
N/A

Frequently Asked Questions

hide show

What are the dimensions for part number 162/4?

The dimensions are 186mm (w) x 194mm (h) x 58mm (d)

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=162/4

User-added image

What is the wall box to suit the B8/30/4

 The wall box part number is 164/4

What are the dimensions of wall box 164/4 and the part number to suit?

The 164/4 which is the wall box to suit part number B8/30/4.

dimensions  188mm x 97mm x 58 mm

What is the part code for a Surge arrestor 3P neutral needed that indicates tripping

 The part code you need is a 16564

What is the wall box to suit the B4/30/2 ?

 The part number for the wall box is 164/2

What are the dimensions of the 164/5 wall box?

The dimensions of the 164/5 wall box are 234mm wide x 97mm high x 58mm deep.

Some of the key features are:
  • Fixed nut
  • 5 gang
  • Standard size
  • for poured concrete
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=164/5

What is the wall box to suit the B6/30/3 ?

 The part number for the wall box is 164/3

What is the wall box to suit the B10/30/5 ?

 The part number for the wall box 164/5

What is the part number for a lid to suit the 265/4 ?

The part number is 265/4LID-GY
For more information on this product range please visit the Clipsal web site on the link provided
https://www.clipsal.com/Trade/search-results?q=265/4

What is the alternate code for a 164/3

There is no plastic box the same size as 164/3, you can use PDL144Mt side by side would do the same

Does the PDL switch mech 687M10 switch DC 12/24 volts?

The switch mech 687M10 is not tested on DC switching and is NOT rated for DC circuits.

What are the dimensions of wall box to suit 14/30/7

Dimensions of wall box 324mm x 97mm x 58mm Part no 164/7

What is the transmission speed of data on a Momentum IObus network?

Title

Momentum IO bus network speed

Issue

 

Product Line

Modicon Momentum

Environment

IO Bus network

Cause

 

Resolution

Data is transmitted at 500 kbits/s on an IObus network.

What is the maximum number of counts available from the multiturn encoder for Lexium Integrated Drives?

The optional multiturn absolute encoder for Lexium ILA and ILS drives has the following maximum counts.
16384 counts x 4096 turns - 1 = total maximum counts of 67108863

ION Setup password limited to 6 digits on Windows 10

Issue
ION Setup build 15254 installed on Windows 10 does not allow to enter more than 6 digits when making a setting change on a device, while standard security should allow up to an 8 digit password.  As a result authentication fails:

          
          Failed to authenticate.

NOTE: Build 15254 did not show the same problem on Windows 7.

Product Line
ION Setup build 15254

Environment
Windows 10

Cause
Older builds of ION Setup are not completely compatible on Windows 10 operating system.

Resolution
ION Setup version 17188 and higher resolves this issue. Here is how to download the latest version of ION Setup: FA212816

What are the part numbers for Brushed Aluminium covers for the 1/2/3 gang architrave switches in the C2000 series?

The part numbers would be  C2001C-BA for single gang, C2002C-BA for double gang and C2003C-BA for triple.
These also come in a labelled version.

For more information, visit the website at https://www.clipsal.com/Trade/search-results?q=c2001c and click on the link to view a brochure.

What is the part no for the lid only as a spare of a 265/4?

The part no is 265/4LID

Please see the following link for further details: https://www.clipsal.com/Trade/Products/ProductDetail?catno=265/4LID

User-added image

What is the part number for the wall box for the 14/30/7 and dimensions?

The part number for the wall box for the 14/30/7 and dimensions are - 164/7 & dimensions - W324mm x H97mm x D58mm

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=14/30/7

User-added image

Do the Advantys STB Reflex actions work without having a Field bus connected or communicating ?

Title

Advantys STB reflex actions

Issue

 

Product Line

Advantys STB

Environment

 

Cause

 

Resolution

Yes, the Reflex actions will work without communications to a Field bus, when the following conditions are true:

  • Two channel output modules with both channels configured for reflex actions.
  • Neither of these reflex actions is receiving any inputs from the NIM (inputs to the reflex blocks are not coming from the virtual module/master PLC or from the action module itself).

Note: Only two-channel output modules are supported.

What are the dimensions of the wall box to suit the B12/30/6 Multi-Gang Switch?

The wall box to suit the 12/30/6 Multi-Gang Switch is a 164/6.

The dimensions of the wall box is a 164/6 are 278mm(W) X 97mm(H) X 58mm(D).

Some of the key features are:

  • 30 series rocker type
  • B-Style
  • Switch arrangement 6 horizontal and 2 vertical
  • Fascia size: 303 mm Width x 120 mm Height
  • 12 number of switch apertures


For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=B12/30/6

What is the part number for the lid to suit the adaptable box 265/4?

The part number for the lid to suit the 265/4 adaptable box is - 265/4LID.

Some of the key features are:

  • For adaptable box 265/4
  • Grey colour
  • IP56

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=265/4LID


 

 

How to do scaling in LXM32?

To set scaling, you need to set scale numerator and denominator in SoMove or these parameters can be written through CAN.
By default, as you can see in the screenshot from SoMove, 1 revolution corresponds to 16384 (resolution of encoder) user units. So, for example, if one revolution correspond to 100 mm, than ScalePOSdenom has to be set to 100. Similar for velocity and ramp (acceleration).

NetBotz appliance firmware upgrade or downgrade causes USB-attached external storage data loss.

Issue:

NetBotz appliance firmware upgrade or downgrade causes USB-attached external storage data loss

Product Line:

NetBotz

Environment:

NetBotz 2.x, 3.x, and 4.x firmware (BotzWare)

Cause:

Not Provided

Resolution:

When upgrading (or downgrading) any version of NetBotz firmware when the running version has been configured to support USB-attached external storage, camera capture images and alert history (graphs and other alert information) are deleted from the storage device when it is re-attached under control of the upgraded or downgraded firmware.

Workaround: Use network-attached storage instead (Windows share or Unix NFS).

Fix Status: No fix available.
 

What is the XNDF3025 ?

Goals and Symptoms

What is the XNDF3025 ?

Facts and Changes

XNDF3025
Textile industry

Causes and Fixes

Updated resolution.
XNDF3025 "was" an electronic sensor for textile applications.
XND range is no more manufactured by =S= (Telemecanique) since 1991.
Nowadays, we do not have any product for textile industries; we have left the market, but the PRODUCTS are made now, by the following company :
= FIL CONTROL =
Post address : Le Plantier, 16220 MONTBRON, FRANCE
Phone :33-5-45-23-93-75.....................Fax :33-5-45-23-93-85
Email : textile@filcontrol.com
Web site : www.filcontrol.com


Legacy KB System (APS) Data: RESL183852 V1.0, Originally authored by FrDa on 04/26/2007, Last Edited by FrDa on 04/26/2007
Related ranges: XZ

What type of hubs are used with the MP43200 Meter-Pak?

Product Line:
MP Meter-Pak

Environment:
Metering

Cause:
Need hub to bring conduit into an MP Meter-Pak

Resolution:
This Meter-Pak's utility compartment will accept two A-L type hubs (2" through 4") in the top endwall. Two closing plates, part number ACPL, are factory installed on the top endwall so the Meter-Pak can also be used for a bottom cable entry application. The bottom endwall will also accept two A-L type hubs (2" through 4"). The catalog numbers of the Series 'A-L' hubs are as follows;

2.0 inch - A200L
2.5 inch - A250L
3.0 inch - A300L
3.5 inch - A350L
4.0 inch - A400L 

Is there a junction box with minimum internal dimensions of 110mm(L) X 80mm(W) X 50mm(H) that also has a certain degree of weather protection available?

Yes the 265/4 would be suitable for the application. It is slightly larger however, it will meet the desired requirements.
Some of its key features are:
  • Surface mount
  • Dimension: 108 mm Length x 108 mm Width x 76 mm Height
  • 143.7 mm screw centres C, 89 mm screw centres D
  • Weatherproof, full cover plate
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=265/4


Migration from ISX Manager to ISX Central hangs on Private Network Check.

Issue:

Migration from ISX Manager to ISX Central hangs on Private Network Check.

Product Line:

InfraStruxure Central / StruxureWare Data Center Expert

Environment:

Potentially all versions

Cause:

IP scheme mis-configuration

Resolution:

If you set up the private side IPs of ISX manager and ISX Central similar to the following, you will see the aforementioned issue:

Manager's private network configuration: IP: 192.168.0.1 Subnet: 255.255.252.0 (therefore the network range was 192.168.0.0-192.168.3.254

Central's private network configuration:IP: 192.168.3.254 Subnet: 255.255.254.0 (network range 192.168.2.0 to 192.168.3.254) DHCP turned off.

To resolve the issue, change the IP scheme so that they match.

Can I use the XW+ AGS as stand-alone?

 The Auto Gen Start is not designed for stand-alone operation. It does not function in a simple system containing only an Auto Gen Start and a generator. The Auto Gen Start requires several other components for configuration and operation.

Generator - The generator should have automatic starting capability. Some manufacturers of generators without this capability may sell an optional automatic engine control module that will simplify operation with the Auto Gen Start. The generator should also supply a Generator Run signal, which the Auto Gen Start uses to detect whether the generator is running. Some generator manufacturers refer to this signal as the hour meter signal or Switched B+.
NOTE : Firmware revisions 2.3 and later do not require a dedicated run signal, rather it uses the presence of AC (AC2 input) to verify the generator has started. Type14 does not monitor a run signal at all.

Control panel - A separate control panel is required to configure the Auto Gen Start and monitor generator starting and stopping activity. The control panel also provides real-time clock information for the Auto Gen Start Quiet Time and Exercise Time features.

Network power : The Auto Gen Start requires a Xanbus power supply to operate. Network power is carried by the network cables, and is supplied by the inverter/charger. As a device that draws network power, the Auto Gen Start consumes a maximum of 3 watts.
 
Start and stop triggers - The Auto Gen Start requires a source of start and stop triggers for automatic operation. These triggers can come from:
• Thermostat 12/24 V input.
• Battery voltage, state of charge, and inverter load status. This information is transmitted over the network by the inverter/charger.
 

Which SmartSlot accessories are supported by the Galaxy 3500 (G3500) UPS?



Issue

Which SmartSlot accessories are supported by the Galaxy 3500 (G3500) UPS?


Product Line
 
  • Data Center and Facility 3 Phase UPS
    • MGE Galaxy 3500 models

Environment
 
  • All serial numbers
  • All firmware versions unless otherwise noted

Cause

The list below details what accessories are supported by the Galaxy 3500 UPS (G3500) and what measures must be taken to utilize them.


Resolution


 
  • Network Management Card 2 - AP9630/30CH, AP9631/31CH


The APC Network Management Card 2 SKUs AP9630/30CH and AP9631/31CH can be utilized with the G3500 UPS. The Network Management Card must be loaded with the sumx firmware application 5.0.3 or higher. The AP9631 ships with the G3500 UPS.

The AP9810 Relay I/O dongle can also used with the AP9631 Network Management Card 2 to have dry contact functionality - (2) inputs, (1) output per AP9810 with a maximum of (2) AP9810 that can be attached.
 

  • Building Management Card (BMS) - AP9622


The AP9622 BMS card is supported in the G3500 UPS. It can utilize some of the 3-phase Symmetra bit register/modbus map, which can be found on the AP9622 product page, but other registers may not report properly if you are not in a 3:3 configuration.

 

  • Dry Contact I/O SmartSlot Card - AP9610 or AP9613


The AP9610 or AP9613 is supported in the G3500 UPS. For AP9610 (or AP9613 utilizing dip switch configurations only) you must use Configuration 2, as mentioned in knowledge base FA156152.  Alternatively, Configuration 4 and the onboard configuration utility can be utilized on the AP9613.

Unfortunately, if you use the included APC accessory terminal screw board with the AP9610, the front panel/UPS door will not close correctly. In order to avoid this issue, there are a few options you can look into.

1.) Purchase a right angle DB25 Male-Female interconnection

2.) Utilize an APC AP9600 single slot SmartSlot expansion chassis and extend the cable to the AP9600 with a 940-1500 serial cable. This communication cable can be routed so that the chassis can sit on top of the UPS. If using an AP9600, the NMC AP9630 or AP9631 should be in the AP9600 expansion chassis and the AP9610 should be in the SmartSlot in the UPS frame. This is the proper installation order per knowledge base article ID FA156034. (Note: This required installation order also applies to AP9613.)

3.) Use an AP9604 SmartSlot triple chassis which comes with a 10' cable. This communication cable can be routed so that the chassis can sit on top of the UPS. Also, if do not want to use the included accessory board, you can make your own cable, using the pinout in the AP9610 user's guide and avoid buying a right angle 25 pin extension cable.

4.) If using both an NMC and AP9610 or AP9613, put both the put the AP9610 or AP9613 and the NMC2 in the AP9604 triple chassis, referencing the correct installation order mentioned in knowledge base article ID FA156034 to ensure proper function of both the NMC2 and AP9610 or AP9613.
 

  • SmartSlot Serial Interface Expander - AP9607, AP9607CB, AP9624


The SmartSlot serial interface expander can be used with the G3500 to supply two dedicated simple signaling ports, such as for use with an AS/400 or an IBM iSeries, if required.

The Interface Expander 2 (AP9624) is also supposed by the G3500 and was released in mid-2014 to replace AP9607 and AP9607CB.
 



 

How do I configure my RADIUS server to authenticate my APC Network Enabled device?

Issue

RADIUS set up with APC Network Management Card enabled products.


Product Line

  • Network Management Card 1 (NMC1) - AP9617, AP9618, AP9619
Devices with an embedded Network Management Card 1 include (but are not limited to): Metered/Switched Rack PDUs (AP78XX, AP79XX), Rack Automatic Transfer Switches (AP77XX, Environmental Monitoring Units (AP9320, AP9340, Netbotz 200)
  • Network Management Card 2 (NMC2) - AP9630/AP9630CH, AP9631/AP9631CH, AP9635/AP9635CH
Devices with an embedded Network Management Card 2 include (but are not limited to): 2G Metered/Switched Rack PDUs (AP86XX, AP88XX, AP89XX), Certain Audio/Video Network Management Enabled products.


Environment
 
  • All serial numbers
  • Firmware versions v2.X.X and higher


Cause

Configuration can vary based on the RADIUS server being used. Below is a successful configuration taken from a FreeRADIUS server. Though this configuration worked through testing, APC by Schneider Electric cannot guarantee that this configuration will work on your RADIUS server. Configuring of your RADIUS server should be provided by your RADIUS server administrator.

Note: Further information on using the specific variety of FreeRADIUS (v2.1.10) included in Zentyal Linux 3.3 is also available in knowledge base article ID FA232648.


Resolution

The three files that need to be edited in order for FreeRADIUS to authenticate properly are:

1) clients.conf
2) dictionary
3) users file

Below are examples of entries that should be entered into each file.

1) clients.conf

client xxx.xxx.xxx.xxx (you would enter the IP address or IP address range of devices authenticating through RADIUS)
secret = radius
shortname = apc

2) dictionary

VENDOR APC 318

BEGIN-VENDOR APC

ATTRIBUTE APC-Service-Type 1 integer APC

VALUE APC-Service-Type Admin 1
VALUE APC-Service-Type Device 2
VALUE APC-Service-Type ReadOnly 3

3) users

# APC local radius authentication (working)
apcradius (username) Auth-Type := Local, User-Password == "apcradius"
APC-Service-Type = 1


Once these entries are made, you should be able to access your APC product via RADIUS authentication.

In some cases, you do need to specify Vendor Specific Attributes. For example, APC part number AP7900 (Switched Rack PDU) uses the same login accounts as listed in the previous example. However, the AP7900 also allows specific outlets to have their own separate accounts/logins. Therefore, you must create additional entries in the event that a user has a login for specific outlets.

1) clients.conf

client xxx.xxx.xxx.xxx {IP address or IP address range of devices using RADIUS authentication}
secret = radius
shortname = ap7900

2) dictionary

VENDOR APC 318

BEGIN-VENDOR APC

ATTRIBUTE APC-Service-Type 1 integer APC
ATTRIBUTE APC-Outlets 2 string APC

VALUE APC-Service-Type Admin 1
VALUE APC-Service-Type Device 2
VALUE APC-Service-Type ReadOnly 3
VALUE APC-Service-Type Outlet 4

3) users

VSAAdmin Auth-Type = Local, Password = "admin"
     APC-Service-Type = Admin

VSADevice Auth-Type = Local, Password = "device"
     APC-Service-Type = Device

VSAReadOnly Auth-Type = Local, Password = "readonly"
     APC-Service-Type = ReadOnly

userA Auth-Type = Local, Password = "apc"
     APC-Service-Type = Outlet, APC-Outlets = "1,3,5"

userB Auth-Type = Local, Password = "apc"
     APC-Service-Type = Outlet, APC-Outlets = "1,2,3,4,5,6,7,8"

UserA will now have access to outlets 1,3,5 and userB will have access to outlets 1,2,3,4,5,6,7,8.



RADIUS and Network Port Sharing with Switched Rack PDU 2G (AP86XX, AP89XX)


Note: See the Security Handbook for APC Network Management Cards for more information on using RADIUS.

For RADIUS users file with VSAs, outlets on guest Rack PDUs can be associated to RADIUS users by using the following method.

# give user access to outlets 1, 2, and 3 on PDU 1,
# outlet 7 on PDU 2, outlets 1 through 6
# on PDU 3, and outlets 1,2,4 through 6, 7 through 10,
# and 20 on PDU 4

newOutletUser Auth-Type = Local, User-Password = "newoutlets"
APC-Service-Type = Outlet,
APC-Outlets = "1[1,2,3];2[7];3[1-6];4[1,2,4-6,7-10,20];"


If you have trouble configuring your RADIUS server, it is advised that you contact your RADIUS server vendor for assistance.

 

Rack PDU 2G (AP8XXX) Network Port Sharing Information


Issue

General information regarding the Network Port Sharing (NPS) Capability of AP8XXX Rack PDU models



Product Line
 
  • Rack Power Distribution
    • AP8XXX Rack PDU series only

Environment
  • v5.1.6 rpdu2g or higher (except where noted)
  • All serial numbers
  • Users interested in Network Port Sharing (giving the ability to share one IP address via one network connection)


Cause

General information


Resolution

Refer to the detailed information sections below.



About the Network Port Sharing Feature

You can use the Network Port Sharing feature to view the status of and configure and manage up to four Rack PDUs using only one network connection. This is made possible by connecting the Rack PDUs via the "In" and "Out" ports on the Rack PDU front panel.

Note: All Rack PDUs in the group must be using the same Rack PDU firmware revision, 5.1.6 or later (excluding v6.0.5 EnergyWise), in order to support the Network Port Sharing Feature. v6.1.0 and higher is also available which supports this functionality while adding the functionality of v6.X.X AOS.

Display ID

The display ID is a number, 1 to 4, used to uniquely identify the Rack PDUs in a group. After two or more Rack PDUs are connected to one another in a group, they can be identified on the various interfaces by the use of this "Display ID". This Display ID is viewable on the LCD by selecting the Display Settings > Display ID > Show option on the LCD keypad.


Installation Instructions

Connect up to four Rack PDUs. Insert an RJ45 terminator (included) in the unused IN/OUT ports on each end of the chain.
 
  • If your AP88XX or AP89XX series Rack PDU was manufactured prior to December 2012, terminators are available from APC. Please contact your local technical support team to obtain these. You'll need two terminators per Network Port Sharing group. Please reference part number 0J-0W05545A which includes qty 2 terminators and provide detail on how many Network Port Sharing groups you plan to have.
  • If your AP88XX or AP89XX series Rack PDU was manufactured after December 2012, low profile terminators have been pre-installed for you in either the IN or OUT port already. These can be hard to miss so please verify. Once your group is ready, you can relocate the terminators to the beginning and end of the chain.
  • AP84XX and AP86XX series Rack PDUs require terminators to function in standalone installations. They have always included a terminator since release. Originally, AP86XX included a larger terminator, taped to their LCD display. In December, 2012, they were also modifed to include a lower profile terminator pre-installed. AP84XX was released in 2014 and all serial numbers will include a pre-installed low profile terminator.

Note: Failure to use APC provided terminators (part number 0W4161A or lower profile version 0W05545A) may cause a loss of communication on the Rack PDUs. This is not supported nor will it likely work properly.

Note: To reduce the possibility of communication issues, the maximum total length of cabling connecting Rack PDUs in a group should not exceed 10 meters.



All Rack PDUs in a Network Port Sharing group should reside in the same rack enclosure. Connect the "Network" port of one of the grouped Rack PDUs to a network hub or switch. This unit will be the "Host" for the Rack PDU group. A Host is defined as a Rack PDU that is connected to the network and is part of a Rack PDU group. Set up network functionality for this Host Rack PDU as specified in the Establish Network Settings section. The Host will automatically discover any "Guest" PDUs connected via In/Out ports. The Rack PDU group is now available via the Host's IP address.

Follow the instructions below before powering up any of the Rack PDUs in the group. If it is desired to have a specific assignment of Display IDs, this can be achieved by powering up the units for the first time in the desired order, 1 to 4. For example, before powering up any of the Rack PDUs connected in a group, determine the Display ID order that you would like. Then, first power up the unit that you would like to have Display ID 1. After that unit has initialized and the LCD has started displaying its screens, power on the unit that you would like to have Display ID 2. Continue in the same way for units 3 and 4, if applicable for your setup.

Note: The Display ID can be configured from the the web interface via the "Device Manager > Load Management > device load > Display ID" field.


Network Port Sharing and CLI Commands

The Command Line Interface allows commands to be sent to guest Rack PDUs. The user may specify the Display ID of the Rack PDU to be commanded, followed by a colon, before the first argument (or as the first argument, if the command does not normally have arguments). Providing a Display ID is optional, omitting it will simply command the local Rack PDU.

Syntax: <command> <id>:<arg1> <arg2>

This will send <command> to the Rack PDU with the Display ID <id>. <id> is delimited from <arg1> with a colon character; do not include any spaces between <id>:<arg1>, as spaces are used to delimit arguments.

Example: To view the power for phase 2 on guest Rack PDU 3, type:

apc> phReading 3:2 power
E000: Success
2: 40 W



Network Port Sharing and the Web Interface

Group Control using Network Port Sharing


The web interface of the Rack PDU will have additional capabilities if the Rack PDU is part of a group. These capabilities are only displayed if the Rack PDU is part of a group. This includes a "Group Status" page, and the ability to select which Rack PDU to view data from. The Group Status page lists basic information for the Host Rack PDU and any connected guests. Guests are denoted using a Rack PDU icon and the Display ID. Information on the Group Status page includes name, location, contact, basic model properties, firmware revision information, and group communication status of each Rack PDU. In addition, the Group Status page allows the user to remove any Rack PDUs that have been removed from the group and are in a lost communication state.


v5.1.6 rpdu2g interface (Home->Group Status)




v6.1.0 and higher interface (Status->RPDU->Group)





Most of the web pages under the navigation menus in the web allow you to switch between Rack PDUs for viewing status and configuration/control. This switching is accomplished by selecting the Rack PDU Display ID of the unit you would like to view. This is located at the top right of each table that supports multiple Rack PDUs. The Host Rack PDU that you are logged into is always denoted with an asterisk (*) following the Display ID.

v5.1.6 web interface




v6.1.0 and higher web interface





Note: The Reset/Reboot web page has many additional reset/reboot options for Rack PDU groups.These include individual Rack PDU reset to defaults, individual Rack PDU rebooting, and clearing of guest PDU lost communication alarms by removing the guests from the group.



Network Port Sharing and Outlet Groups/Outlet Users

To create an outlet group, you must enable the desired group method. Choices are Disabled, Local Only, Enabled via Network, and Enabled via In/Out Ports (Network Port Sharing).

All of the Rack PDUs must use firmware that has the same version number for both the APC Operating System (AOS) module and the application module.


Outlet Users

Outlet users can be assigned outlets on any Rack PDU in a group with switched outlets. The outlet users will be stored on the Host PDU. In the web interface, you can view outlets assigned to a particular PDU by clicking on its Display ID in the window. Outlet users can be configured on the Device Manager > Outlet Manager web page.


Network Port Sharing Event/Data Logs and Traps

Rack PDU events from guest PDUs are sent to the host PDU for inclusion into its log. The log entry will include the Display ID of the unit that the event occurred on. These events are then handled the same as local events from the host PDU. Therefore alarms, SNMP traps, e-mails, Syslog, etc will support Rack PDU events and alarms from all Rack PDUs in a group.

Note: System level events will only be logged for the host PDU. System events from guest PDUs will not be logged on the host PDU.


Example event log: Rack PDU 4: Outlet #2 off.


Network Port Sharing and the Data Log

The host Rack PDU will poll data from guest PDUs so that data from all PDUs in a group are available. To view data from a different Rack PDU in a group, select the desired Rack PDU from the "Filter Log" pull-down list. Similarly for data log graphing, you can select a different Rack PDU by clicking on the "Change Data Filter" button.


Network Port Sharing and RADIUS

See the Security Handbook for APC Network Management Cards for more information on using RADIUS.

For RADIUS users file with VSAs, outlets on guest Rack PDUs can be associated to RADIUS users by using the following method.
# give user access to outlets 1, 2, and 3 on unit 1,
# outlet 7 on unit 2, outlets 1 through 6
# on unit 3, and outlets 1,2,4 through 6, 7 through 10,
# and 20 on unit 4
newOutletUser Auth-Type = Local, User-Password = "newoutlets"
APC-Service-Type = Outlet,
APC-Outlets = "1[1,2,3];2[7];3[1-6];4[1,2,4-6,7-10,20];"


Network Port Sharing and SNMP Polling

All Rack PDUs in a group can be accessed through the Host Rack PDU via SNMP "rPDU2" OIDs available in our PowerNet MIB.

Note: PowerNet MIB v4.0.6 or higher is required for use with SNMP and a Network Port Sharing enabled device.

The full path to these OIDs is:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).apc(318).products(1).hardware(1).rPDU2(26)

Individual Rack PDUs can be identified in the SNMP MIB tables by viewing the corresponding "Module" OIDs in each table. These Module OIDs will return the Display ID of the Rack PDU.

Example Module OIDs: rPDU2IdentModule, rPDU2DeviceConfigModule, rPDU2SensorTempHumidityConfigModule

In order to be backwards compatible with previous versions, the Host Rack PDU will always be the first index in any table that supports multiple Rack PDUs. In addition, after the Rack PDU group is set up, the index order of guest Rack PDUs should not change even if the Display ID is changed or a PDU temporarily loses communication. The index order should only change if you manually remove a Rack PDU from the group. A MIB table walk should skip the indexes associated with a Rack PDU that has temporarily lost communication.


Network Port Sharing and Config.ini

The INI configuration utility is able to get and set values for all Rack PDUs in a group. In order to be backwards compatible, the host Rack PDU will always be designated as first, "PDU_A". Any guest Rack PDUs are then designated "PDU_B", "PDU_C", and "PDU_D" based on their Display ID in ascending order. Therefore, "PDU_A" will not necessarily correlate to Display ID 1, and so on.

Note: Because of the large number of configuration values possible in a Rack PDU group, it may take a very long time to process an INI file set. For example, a Rack PDU group of 4 units with all values changing may take 30 minutes to complete processing.

 


Updating firmware for Network Port Sharing Groups

For a NPS Group, all Rack PDUs in the group should have the same firmware version. If all Rack PDUs in the group have AOS v6.1.3 or later, simply update the host Rack PDU and it will then update all guest Rack PDUs automatically. This may take up to 10 minutes. For any Rack PDUs in the group that do not have AOS v6.1.3 or later, they will need to be updated manually and individually.

Note: Currently, only the AOS file and rpdu2g application file are supported via the "auto-update" feature in a Network Port Sharing group. Bootmonitor upgrade (along with AOS and rpdu2g APP) is supported in rpdu2g v6.3.3 and higher. 



Troubleshooting
  • If you are having communications problems with Network Port Sharing, check that the total length of network cable between up to four units is not more than 10 meters.
  • If you are having communications problems with Network Port Sharing, check that a terminator (part number 0W04161A or the lower profile version 0W05545A) is installed at both ends of up to four units that can be grouped together.
  • If you are using Network Port Sharing and do not see one or more of the units in the group, check that all units in the group are using the same firmware revision.

You can download appropriate firmware revisions from the APC website.
 

ACRP1XX, ACRD5XX, ACRP5XX, and ACRC5XX Parts List

Issue:
ACRP1XX, ACRD5XX, ACRP5XX, and ACRC5XX Parts List.

Product line:
ACRP1Xx, ACRP5XX, ACRD5XX, ACRC5XX.

Environment:
All Serial Numbers.

Cause: 
Parts.

Resolution:
Please contact Cooling Tech Support to confirm the part numbers before quoting as some may have changed. 888-695-6500 Option 2, Option 2, Option 2
 
Description Part Number Mfg. P/N
     
ACTUATOR - FLOATING 132 IN-LBS W491-0521  
ADPTR ELBOW 1/2 INCH - 15 MM PEX (FOR PIPING - Compression coupling) [PART OF SHIP LOOSE KIT] W875-0989  
ADPTR PIPE 3" ENGL TO METRIC (adapter for connecting to metric pipe) 0M-61194  
ADPTR STRAIGHT 1/2 INCH - 1/2 INCH PEX (Humid & Cond Connections) [PART OF SHIP LOOSE KIT] W875-0991  
ADPTR STRAIGHT 1/2 INCH - 15 MM PEX [PART OF SHIP LOOSE KIT] 875-0989  
ATS - ACRP500 W451-0227  
ATS - ACRP501 W451-0226  
ATS TRANSFORMERS W430-0423  
BALL VALVE, GAS SHUTOFF 3/4" [PART OF SHIP LOOSE KIT] 875-4280  
CABLE ASSY 200V CONTROL JUMPER W0W3109  
CABLE ASSY ACRP CW MAIN CTRL W0W4760  
CABLE ASSY ATS CONTROL - ACRP5xx 208V (CW) (connects TIMERs, CONTACTORs, & CIRCUIT BREAKERs) 0W3103  
CABLE ASSY ATS CONTROL - ACRP5xx 480V  (CW) (connects TIMERs, CONTACTORs, & CIRCUIT BREAKERs) 0W3175  
CABLE ASSY CABLE ATS #1 200-240V 0W3121  
CABLE ASSY CABLE ATS #1 480V 0W3122  
CABLE ASSY FAN GUARD [female to female connector and the rear of the fan grill module] 0W3104  
CABLE ASSY FAN/HTR INTRLK ADAPT - ACRP1xx (DX) (P30A to P5 & P6) 0W3569  
CABLE ASSY FAN/HTR INTRLK ADAPT - ACRP5xx (CW) (P30A to P5 & P6) 0W3568  
CABLE ASSY Humidity Sensor For ACRP 1.6 ft - Spare Part (front) W0N-0297  
CABLE ASSY Humidity Sensor For ACRP 17ft - Spare Part (rear) W0N-0865  
CABLE ASSY TEMPERATURE SENSOR KIT (AT0056GB01 - ACRP ADDITIONAL SUPPLY TEMPERATURE SENSOR) 0N-0933  
CABLE ASSY THERMISTOR/PROBE EMU 1.6 FT (front) 0W3314A  
CABLE ASSY THERMISTOR/PROBE EMU 13 FT (RACK INLET) [PART OF SHIP LOOSE KIT] 0J-0W99952  
CABLE ASSY THERMISTOR/PROBE EMU 8 FT - SPARE PART 0J-0W3163A  
CABLE ASSY THERMISTOR/PROBE EMU 8 FT ASSY (Generic EMU sensor) AP9335T  
Cable Fan To Safety Plug for ACRPxxx (CW AND DX) - Spare Part W0W3105  
Cable for FAN ACRP1xx (DX) - Spare Part (P30 to P101/P100) W0W3118  
Cable For FAN ACRP5xx (CW) - Spare Part W0W3120  
Cable for Reheat ACRP1xx (DX) - Spare Part W0W3117  
Cable for Reheat ACRP5xx (CW) - Spare Part W0W3119  
Cable from Ckt Brk to Reheat/Humidifier for ACRP1xx (DX) - Spare Part W0W3106  
Cable from Ckt Brk to Reheat/Humidifier for ACRP5xx (CW) - Spare Part W0W3107  
Cable Main Power 208/400V For ACRP100/102 (DX) - Spare Part W0W3128  
Cable Main Power 480V For ACRP101 (DX) - Spare Part W0W3127  
Cable Main Power ACRP5xx ASSY ATS 200-240V #2 0W3125  
Cable Main Power ACRP5xx ASSY ATS 400-480V #2 0W3126  
CABLE TIE HNGD FOR HOLE D4.8MM ROHS [PART OF SHIP LOOSE KIT] 820-0048  
CABLE Variable Frequency Drive 200V for ACRP100 (DX) - Spare Part W0W3171  
CABLE Variable Frequency Drive 400V for ACRP101 (DX) - Spare Part W0W3116  
CDU Metric Pipe Connection Kit ACAC20012  
Circuit Board For Compact ACRP100/500 208 VAC 3 Phase - Spare Part (Humid Control Board) W0P2484  
Circuit Board For Compact ACRP101/501 460 VAC 3 Phase - Spare Part (Humid Control Board) W0P2505  
Circuit Breaker 2P 5A 240V Class K -  ACRP500 ATS MONITOR BREAKERS W530-0920 ABB P/N : 2CDS 272 417 R0357
Circuit Breaker 2P 5A 480V UL489 Class K - ACRP501 ATS MONITOR BREAKERS W530-0919 ABB P/N : 2CDS 272 317 R0357
Circuit Breaker 3P 10A 280V Class K -ACRP500/100 HUMIDIFIER BREAKER W530-0917 ABB P/N :  2CDS 273 417 R0457
Circuit Breaker 3P 10A 480V UL489 Class K - ACRP101 ELECTRIC HEATER BREAKER W530-0918 ABB P/N : 2CDS 273 317 R0427
Circuit Breaker 3P 15A 480V UL489 Class K - ACRP501 ELECTRIC HEATER BREAKER W530-0916 ABB P/N : 2CDS 273 317 R0457
Circuit Breaker 3P 20A 240V UL489 Class K -ACRP100 ELECTRIC HEATER BREAKER W530-0915 ABB P/N : 2CDS 273 417 R0487
Circuit Breaker 3P 30A 240V Class K - ACRP500 ELECTRIC HEATER BREAKER W530-0913 ABB P/N : 2CDS 273 417 R0527
Circuit Breaker 3P 30A 480V - ACRP501/101 CB0-A/B INPUT BREAKER W530-0442 ABB P/N : T1N030TL
Circuit Breaker 3P 50A 480V - ACRP501/101 CB0-A/B INPUT BREAKER W530-0445 ABB P/N : T1N050TL
Circuit Breaker 3P 50A 280V TMF ABB T1N -ACRP500 CB0-A/B INPUT BREAKER W530-0445 ABB P/N : T1N050TL
Circuit Breaker 3P 5A 240V Class K - ACRP500/100 FAN / COND PUMP W530-0912 ABB P/N : 2CDS 273 417 R0357
Circuit Breaker 3P 5A 480V Class K - ACRP501/101 FAN / COND PUMP W530-0911 ABB P/N : 2CDS 273 317 R0357
Circuit Breaker 3P 70A 280V TMF ABB T1N - ACRP100 CB0-A INPUT BREAKER W530-0447 ABB P/N : T1N070TL
Circuit Breaker 3P 8A 480V UL489 Class K - ACRP501/101 HUMIDIFIER BREAKER W530-0909 ABB P/N : 2CDS 273 317 R0407
CLAMP DOUBLE SNAP CRIP 27-31MM [PART OF SHIP LOOSE KIT] 875-00009  
Complete 801 PCB CRAC MB - (MB Only) W0P2340  
Complete 805 PCB CRAC 2X DP - (DPS Diff Pressure Card) W0P2354  
Complete 879 PCB XA SIMM - (XAS card) W0P2342  
COMPRESSOR 200V RECIP N-VAR R407C (ACRP100) 208v W875-3801 120B0032
COMPRESSOR 460V RECIP N-VAR R407C (ACRP101/ACRP102) 460v W875-3802 120B0004
COMPRESSOR NOISE COVER (MEETS UL 94 HB) 850-0665A  
Condensate Overflow CLAMP DOUBLE SNAP CRIP 27-31MM 875-00009  
Condensate Overflow HOSE STEAM SUPPLY 7/8ID 660-7002B  
Contactor A26 Coil 200/240VAC 1NO For ACRP500 - Spare Part W451-0046 ABB P/N : 1SBL241001R7510
Contactor, NR 24VAC 16 AMP 1NO - Spare Part (ACRP100 - heater) W451-0141 ABB P/N : A16-30-10-81
Contactor, NR 24VAC 9 AMP 1NO - Spare Part (ACRP101 - both heaters & humidifier; ACRP100 - humidifier) W451-0104 ABB P/N : A9-30-10-81
CPLR HFC35 PIPE THREAD SHUTOFF 3/8 BSPT [PART OF SHIP LOOSE KIT] 875-0978  
CPLR PLC PIPE THREAD SHUTOFF 3/8 BSPT [PART OF SHIP LOOSE KIT] 875-0974  
CRANK CASE HEATER ASSY #1 W0M-9895  
ELBOW ADPTR REDUCTION 1/2 INCH - 3/8 INCH [PART OF SHIP LOOSE KIT] 875-0990  
Fan Module Assembly 200V - Spare Part W0M-9841  
Fan Module Assembly 400-480V ACRP101/501- Spare Part W0M-9848  
FILTER AIR 30% 418X470X96 MM (Standard) 0J-875-2013A  This is a pack of 4 filters
FILTER AIR 85% 418X470X96 MM  (Optional) W875-2014  
Flexible Fluid Piping - 100 Feet (30.4 Meters) ACAC20003  
Flexible Fluid Piping - 300 Feet (91.4 Meters) ACAC20002  
Flexible Fluid Piping Clamp/Hanger ACAC20007  
Flexible Fluid Piping Clamp/Hanger (qty of 50) ACAC20008  
Flexible Fluid Piping Couplings (4 per pack) [875-4308 is the individual pn#] ACAC20006  
Flexible Fluid Piping Couplings FTG PEX 1"NPT with CRIMP [comes in a pack of 4 with pn#ACAC20006] 875-4308  
Flexible Fluid Piping Insulation - 100 Feet (30.4 Meters) ACAC20005  
Flexible Fluid Piping Insulation - 300 Feet (91.4 Meters) ACAC20004  
Flexible Fluid Piping Strut Mounted Clamp ACAC20009  
FLOW METER - 1"  (body of the flowmeter) W875-4018  
FLOW METER ELECTRONIC PIPING FLOW electronics section of flowmeter W0N-0278  
FLOW METER GRUNFOS (new flowmeter) W0N-0303  
Flow meter UNION 1.0" C X NPTI (* send 2 with a flow meter body) 875-0876  
FLTR-DRIER 5/8" ODF SOLDER W875-2012  
FUSE FAST 30A CLASS J 600V CUBEFUSE for Compressor - ACRP101 (DX 400V) W516-0107 BUSSMANN : TCF30
FUSE FAST 60A CLASS J 600V CUBEFUSE for Compressor - ACRP100 (DX 200V) W516-0106 BUSSMANN : TCF60
FUSEHOLDER CLASS J 30-60A 600V CUBEFUSE - ACRP1xx (DX 200/400V) W890-0079 U2-1IGZ/H U2311301
GASKET FOR INROW CW 3-WAY VALVE W875-00012  
HIGH PRESSURE SWITCH ASSY (cuts out at 377psi) W0M-9897  
HOSE STEAM SUPPLY 7/8ID (ordered in feet) [PART OF SHIP LOOSE KIT] 660-7002B  
HUMIDIFIER COMPACT 1-3 KG/H 200 V (humidifier frame) 875-9001  
HUMIDIFIER COMPACT 1-3 KG/H 480 V (humidifier frame) 875-9003  
HUMIDIFIER CYLINDER HOLDING BELT W875-00029  
HUMIDIFIER DRAIN VALVE SLND CAREL 1-1/4 IN W875-4257  
HUMIDIFIER FILL VALVE W875-4233  
HUMIDIFIER HIGH COND. CYLINDER REPLA 1-3KG/H 208V (Standard conductivity 350-1250) W491-0529 BL0TRB00H1
HUMIDIFIER HIGH COND. CYLINDER REPLA 1-3KG/H 480V (Standard conductivity 350-1250) W491-0528 BL0TRM00H1
HUMIDIFIER LOW COND. CYLINDER REPLA 1-3KG/H 208V SPARE PART (Optional conductivity 125-350) W875-00030 BL0TRA00H1
HUMIDIFIER LOW COND. CYLINDER REPLA 1-3KG/H 480V SPARE PART (Optional conductivity 125-350) W875-00032 BL0TRL00H1
HUMIDIFIER Printed Circuit Board For Compact 3 KG/H 400 VAC 3-Phase - Spare Part W0P2504  
HUMIDIFIER Printed Circuit Board For Compact 3 KG/H 208 VAC 3-Phase - Spare Part W0P2484  
KIT DOOR CRV POWERVIEW 42U 600MM SX (BLK KEY) (Rack) W0H-0128  
KIT DOORS SPLIT PERF 42U 600MM BLK SX (Rack) W0H-0042  
LABEL MODEL/ SERIAL # ROHS [PART OF SHIP LOOSE KIT] 885-7015B  
Leak sensor (ships with orange sensor and cable ties; NO BLACK CAT5e CABLE)[ACRP ONLY] AP9326  
Main Control Cable for ACRP1xx (DX) - Spare Part W0W3100  
Main Control Cable for ACRP5xx (CW) - Spare Part (new flow meter) W0W4760 (old flow meter) W0W3101  
MOTHERBOARD SET (MB,WC,XA,DP,OPT)  (Complete Board Assy) W0P2372  
Motherboard Set 1-Bay Board Set (MB,WC,XA,DP,OPT,485-FMTR) - Spare Part (board set for new flowmeter) W0P2860  
NMC with CAN controller - (EMBEDDED NMC) WAP9517CAN  
PCB 808 CRAC 9X RLY 2X OPTO FAN TACH (relay board) W0P2465  
PCB 811 CRAC 8X OPTO SIMM (SIMM Card power control board) W0P2358  
PCB CMS Complete 809 CRAC 3X RS485 SIMM - (CMS power control board) W0P2355  
PCB COMMUNICATION CARD FOR RS485 (Humid Comm Board) W0P2483  
Peristolic Pump (Pump only) 491-0510  
Peristolic Pump Goo (solution-send with the perostolic pump) 491-0511  
PIPE ASSY 6 INLET RECIVER 0M-9815A  
POLY BAG (6" X 9") PA130 [PART OF SHIP LOOSE KIT] 872-9014  
POWERVIEW MP - SPARE PART W0N-0286  
PRESSURE RELIEF VALVE -3/8 MPTX1/2 FLARE 425PSIG (INDOOR) W875-4230  
PUMP CONDENSATE HARTELL 240V * ALL UNITS 200/400/480 W491-0523  
QUICK CPLR HFC35 ELBOW HOSE SHUTOFF 1/2 ID (Internal Connections Condensate to W875-0979) W875-0981  
QUICK CPLR HFC35 HOSE SHUTOFF 1/2 ID (Internal Connections Condensate to W875-0981) W875-0979
QUICK CPLR HFC35 IN-LINE HOSE SHUTOFF 1/2 ID (Condensate Connects to W875-0978) W875-0980
QUICK CPLR HFC35 PIPE THREAD SHUTOFF 3/8 BSPT (Condensate Connects to W875-0980) [PART OF SHIP LOOSE KIT] W875-0978
QUICK CPLR PLC ELBOW MALE 3/8 OD 1/4 ID (Internal Connections Humid to W875-00020) W875-00021
QUICK CPLR PLC PIPE THREAD SHUTOFF 3/8 BSPT (Humid Connects to W875-0976) [PART OF SHIP LOOSE KIT] W875-0974
QUICK CPLR PLC PNL MNT FEMALE 3/8 OD 1/4 ID  (Internal Connections Humid to W875-00021) W875-00020  
QUICK CPLR PLC PNL MNT HOSE SHUTOFF 3/8 OD 1/4 ID (Humid Connects to W875-0974 ) W875-0976  
Reheat Module for 200V ACRP100/500 - Spare Part W0N-0813  
Reheat Module for 400-480V ACRP101/501- Spare Part W0N-0812  
RES CARB FILM 1/4W 5% 120 OHM [PART OF SHIP LOOSE KIT] 110-0121  
ROTO MALE STRAIGHT 1 1/4" - 3/4" SWT - (DX Refrig Supply and Return Connections Internal) 875-4285  
Rotolock Pipe FEMALE ENDCAP 1-1/4" 12 UNF W875-4288  
Rotolock Pipe Female Straight Fitting 1-1/4" - 3/4" SWT - (DX Supply & Return Connection) [PART OF SHIP LOOSE KIT] W875-4286  
SCREW M5 X 10MM TORX W/WASHERS ROHS [PART OF SHIP LOOSE KIT] 803-5531A  
SCREW M6 X 16MM TORX W/WASHERS ROHS [PART OF SHIP LOOSE KIT] 803-0686A  
SCREW M6X12MM TORX W/WASHERS ROHS [PART OF SHIP LOOSE KIT] 803-0684A  
SCREW THFM M6X10MM PN HD TX ZP [PART OF SHIP LOOSE KIT] 803-0660  
Side Panel Assy  42U x 1070mm Blk W0M-5965  
SIGHT GLASS 5/8" ODF SOLDER (Piping) W875-2011  
SOLENOID 24AC COIL 6POSITION PLUG ASSY  (BYPASS) W0M-8204  
SOLENOID COIL ASSY (LL) W0M-9894  
SOLENOID REFRIGERATION VALVE 3/8 875-4196  
SOLENOID REFRIGERATION VALVE 5/8 W875-4282  
STRAIGHT ADPTR REDUCTION 3/8 BSPT-1/2 NPT  (Humid & Cond Supply) 875-4341  
TEFLONRINGS FOR ROTO 1 1/4"  (for suction line at the compressor) [PART OF SHIP LOOSE KIT] W875-4294 compressor
TEFLONRINGS FOR ROTO 1" (for discharge line at the compressor) [PART OF SHIP LOOSE KIT] W875-4291  
TELECOUPLNG 8P8C RJ45 STRAIGHT (ethernet telecoupler) W750-0034  
TEV VALVE, 5/8 IN 7/8 OUT R-407C W875-1001  
TRANSDUCER PRESSURE 2CP5 W875-3400  
TRANSFORMER CLASS II 100VA 208-230-460-480VX24V-30V W430-0197 T30018 Rev C
TYRAP 390MM V0 RATED GT120RV0 [PART OF SHIP LOOSE KIT] 820-0390  
UNION - Ring Seal D35 X 3 - (CW Supply and Return Connections) W875-4298  
UNION 1.0" C X NPTI Gasket 875-0887  
UNION END 1-3/8 ID SWT CW 37 Sleeve Union End (CW Supply and Return Connections) 875-00014  
UNION END 1-3/8 ID SWT HEX (CW Return Connections) 875-00034  
UNION Extension Adapter COPLING 11 NPT 1-3/8 ID SWT (CW Supply and Return Connections) 875-00015  
UNION FITTING 1-1/2'' 11 NPT  (CW Supply and Return Connections) 875-4289  
UNION NOT 1-1/2'' 11 NPSM 1 3/8'' SWT (CW Supply Connections) 875-4292A  
VARIABLE FREQUENCY CONVERTER 11KW 200 V W491-0531  
VARIABLE FREQUENCY CONVERTER 11KW 400 V W491-0530  
VARIABLE FREQUENCY Electrical Board 11KW 200 V (1.07 upgrade) 530-1138A  
WIRE ASSY FM 208V JUMPER 0W2540  
WIRE ASSY FM 208V JUMPER SET W0H-0152  
WIRE ASSY FM 230V JUMPER 0W2541  
WIRE ASSY FM 380V JUMPER 0W2542  
WIRE ASSY FM 400V JUMPER 0W2543  
WIRE ASSY FM 415V JUMPER 0W2544  
WIRE ASSY FM 460V JUMPER [PART OF SHIP LOOSE KIT] 0W2545  
WIRE ASSY FM 480V JUMPER 0W2546  
WIRE CLIP - BLACK AP9335TH [PART OF SHIP LOOSE KIT] 870-13220  
Wire Kit Customer Interface (CW AND DX) - Spare Part W0W3124  
WIRE TIE 8 X 0.1 X 0.06 NYLON 105C ROHS [PART OF SHIP LOOSE KIT] 820-0003A  
ZIP LOCK POLY BAG 3 X 4 [PART OF SHIP LOOSE KIT] 872-0019  
1U Airflow Management Blanking Panel Kit (Qty 2) Black AR8108BLK   
1U 19" Black Modular Toolless Airflow Management Blanking Panel - Qty 10    AR8136BLK  
1U 19" Black Modular Toolless Airflow Management Blanking Panel - Qty 200    AR8136BLK200  
MECH-ELEC INTERLOCK FOR CONT. A9-A40 450-0515  
 
 
 
RC/RP50x CW Supply Piping                                 RC/RP50x CW Return Piping                    RD50x/RP10x DX Supply & Return Piping

 

 
HUMIDIFIER SUPPLY LINE                                         CONDENSATE DRAIN LINE