Which networks are supported on the Modicon Momentum by Communication adapters
The following networks are supported by Modicon Momentum Communication adapters
Communication adapters for Ethernet TCP/IP
170 ENT 110 02 Transparent Ready Class A10
170 ENT 110 01 Transparent Ready Class B20
INTERBUS SUPI 3
170 INT 110 03 Twisted Pair
170 INT 120 00 Fibre optic
INTERBUS I/O bus SUPI 2
170 INT 110 00 Twisted Pair
Profi bus DP
170 DNT 110 00
DeviceNet
170 LNT 710 00
Modbus Plus
170 PNT 110 20
170 PNT 160 20
170 NEF 110 21
170 NEF 160 21
Fipio
170 FNT 110 00
170 FNT 110 01
What is the part code for a caravan lead with RCD 15m permanent connection
The part code is PDL 953/15
Is there a PDL 953/15 that is longer than 15m
No not available
Please note this product is being phased out
What is the range of a Clipsal 750WPR passive infrared sensor
The beam scans a 18m radius out from the sensor and around 110 degrees in an arc
Do you have a shielded CAT 5E 10m patchlead?
No unfortunately this part is not available.
What is the measurement for the mounting centres for the Clipsal 10M
What are the ATV630D11N4 Dimensions and weight?
Dimension = 409 x 171 x 233
7.7kg
Is the Lexium I/O expansion card outputs sourcing or sinking?
The digital outputs from the expansion card are true high, 24 volts sourcing. However, the digital outputs located at the drive X3 connector are true low, 24 volts sinking. A sample schematic is shown in the attached document.
Legacy KB System (APS) Data: RESL157164 V2.0, Originally authored by DaRo on 03/01/2012, Last Edited by MiOB on 03/01/2012
Related ranges: Lexium 17D
What size cable can be used with the Clipsal 413QC socket?
1mm - 2.5mm
See attached.
What is the socket for 418SL or 439SL
438L - Socket PVD 10A suit 1mm ord.duty flex, rnd Earth socket.
Do you do a European socket outlet?
Yes the part number is 56SO332/6LE
How can you change the configuration of the Momentum CPU Serial port 1 from RS485 to RS232?
Issue:
When I try to change the Serial Port on the Momentum CPU from RS485 to RS232, the configuration is grayed out in Control Expert (Unity Pro).
Product Line:
Momentum PLC
Environment:
Control Expert v14
Unity Pro XL V13
Cause:
The serial port can not be changed from RS485 to RS232.
Resolution:
Serial Channel 1 on the Momentum CPU modules 171 CBU 78090, 171 CBU 98090 and 171 CBU 98091 is a static RS485 port.
It is not configurable to be used with RS232.
Do the 755PSMA2 smoke alarms have an insect screen?
Yes, the new Gen 2 smoke alarms have a 1mm mesh stainless steel high insect screen on the optical sensing chamber.
Are Momentum Ethernet modules full or half duplex?
The M1E Momentum processors are 10 meg half duplex. The 170 ENT 110 01 is 10/100 meg full/half duplex. The 170 ENT 110 00 is 10 meg half duplex..
What causes 'PrwxLoadLib Runtime error 17' when loading a loadable .DAT file using Proworx 32?
The path to the project or loadable file should not be more than 3 levels deep when using Proworx 32.
Legacy KB System (APS) Data: RESL201758 V1.0, Originally authored by DaSo on 04/19/2010, Last Edited by DaSo on 04/19/2010
Related ranges: ProWORX
What is the sensing distance for the Clipsal 753?
The effective field of view is circular, approximately 14m diameter, when mounted on a ceiling 2.4m above the floor.
See Installation instructions for more information
What voltage is the key tag 6200KT and does it come with a Card?
It is 24V DC
Enquire at Assa Abloy 1300 562 587.
Unfortunately we do not sell the cards.
Do you sell the center part of a 435VFS15 or the flap as a spare part?
No, unfortunately we do not sell the center part of a 435VFS15. However we do sell the flap and the rubber seal as a spare part.
The part numbers are 435VFS15FLAP and 435VF-GSKT.
Does Concept support the Momentum 170 AMM 090 01 analog module?
Yes, Concept =>2.6 SR3 adds a choice for the 170 AMM 090 0X module which supports both the AMM 090 00 and AMM 090 01 modules.
Legacy KB System (APS) Data: RESL174058 V1.0, Originally authored by on , Last Edited by on
Related ranges: Concept
SSL is Supported by Netbotz Version 2 Appliances
Issue:
SSL is Supported by Netbotz Version 2 Appliances
Product Line:
NetBotz
Environment:
NetBotz version 2.
Cause:
Secure communications options
Resolution:
All NetBotz Version 2 Appliances (320, 420, 500) support SSL (secure socket layer) connections in both the Advanced View and the Basic View.
Is there a fiber optic distance requirement between the 140CHS11000 modules in a Quantum Hot Standby System?
The fiber optic distance requirement between the 140CHS11000 modules is 3 meters which is the length of the supplied fiber cable.
A maximum distance can be up to 1km using 62.5/125 micrometer fiber cable with ST style connectors.
Legacy KB System (APS) Data: RESL197850 V2.0, Originally authored by DiSa on 02/18/2009, Last Edited by DiSa on 11/15/2012
Related ranges: Modicon Quantum
What are the dimensions of the PDL149 double flush box?
Overall dimensions are 135 x 98mm x 57 deep
Holes for attaching the plates are 84 high x 71mm wide
It is made of 1mm thick galv steel
With the ATV58, ATV61, or ATV71 analog output set for output frequency, why does it only provide 17ma when the drive output frequency is 60hz?
Issue: With the ATV58, ATV61, or ATV71 ATV312 ATV630 ATV930 analog output set for output frequency, why does it only provide 17ma when the drive output frequency is 60hz?
Product Line: ATV58 ATV61 ATV71 ATV312 ATV630 ATV930
Environment: All
Cause: Ouput frequency not ascaled correctly
Resolution:
The analog output provides a signal proportional to the motor frequency estimated by the drive controller.
The minimum configured value corresponds to zero.
The maximum configured value of the analog output corresponds to the maximum frequency setting (tFr), not the high speed setting (HSP).
The default tFr setting is 20% higher than the HSP. (72 hz for 60 hz applications, 60 hz for 50 hz applications)
Need to set the tFr parameter to 60 hz to match the HSP setting of 60 Hz.
Lowering the maximum frequency setting may result in nuisance Overspeed faults.
What is the tunnel size of L7/150 and what size cables do they take?
L7/150 is 500V 370A 7 Hole Front Wiring Neutral Link. Black base and cover.
Dimensions: 162 x 53 x 55mm.
2 tunnels, 17mm diameter accommodate 150mm2 cable.
1 tunnel, 15.5mm diameter accommodate 120mm2 cable.
2 tunnels, 10mm diameter accommodate 50mm2 cable.
2 tunnels, 5.9mm diameter accommodate 16mm2 cable.
Supplied with Allen key.
For further information, please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=L7/150
What are the dimensions for the 10M?
Clarification: not the 10MP.
In theory any panel thickness less than 3.8mm will suit
Hole size is 35.7mm diameter.
Like products:
10M
10MD
10MDS
10MDLS
10MD15S
10MD20
What are the screws for the neutral and earth bar in the 230DRAVL?
The neutral and earth bar in the 230DRAVL are 6mm in diameter , 1mm pitch and 11mm in length.
What is the difference between LA9D11569 and LA9D115691?
Issue:
Identifying differences between two part numbers
Product Line:
IEC contactors and starters
Environment:
Products sold and used in the United States
Cause:
Selecting between two similar part numbers
Resolution:
LA9D11569 is a set of power connections. LA9D115691 is the bottom connector only as shown on page 16-9 of Digest 173 for the LC1D115 and LC1D150 contactor.
IPMI Functionality Requires BotzWare Version 2.4
Issue:
IPMI Functionality Requires BotzWare Version 2.4
Product Line:
NetBotz
Environment:
NetBotz version 2.
Cause:
3rd party device monitoring protocols
Resolution:
Support for IPMI was added in version 2.4 of BotzWare so you must have version 2.4 to utilize this functionality.
Can I order a NEMA 4X starter enclosure without conduit hole in the bottom?
Issue:
Are NEMA 4X starter enclosures available without a conduit hole in the bottom?
Product Line:
Class 9991, Class 8536, 8538, 8736, 8738, NEMA 4/4X Enclosures
Environment:
US Product Lines
Cause:
The 176 Digest does not specify
Resolution:
No. We only offer NEMA 4/4X enclosures with a conduit hole in the bottom.
What is the detection range for the Argus Occupancy Sensor SAE_UE_MS_CU_WE
PIR: 360° circular, adjustable up to Φ8m
US: 360°, adjustable up to 10m x 16m, it’s an oval shape, at the height of 2.5 m
What is the connector to fit the XUM2AKCNM8T proximity switch
The connector is an M8 4 pin female connector
XZCPV0941L2 for a straight connector with PVC cable
XZCPV1041L2 for an angled connector with PVC cable
XZCP0941L2 for a straight connector with PUR cable for severe environments
XZCPA0941L2 for a straight connector for food & beverage applications
(change L2 to L5 or L10 for 5 or 10m cables)
See attached data sheet
What are the technical specifications of the 3HS1200AL?
The Technical Specifications of the 3HS1200AL is below
RPM:
High: 290
Medium: 250
Low: 142
Air Movement: 172 M3/min
Fan Power: 65W
Mounting Type: Hangsure
Blade Diameter: 1200mm
Control Type: Wall
Matching Down Rod:
760mm: DR760X21
1200mm: DR1200X21
For Further information, please visit
https://www.clipsal.com/trade/products/ProductDetail?CatNo=3HS1200AL
SNMP MIB for NetBotz Version 2 Appliances
Issue:
SNMP MIB for NetBotz Version 2 and 3 Appliances
Product Line:
NetBotz
Environment:
NetBotz version 2 and 3
Cause:
Downloading SNMP MIB.
Resolution:
The SNMP MIB for NetBotz Appliances can be downloaded from the NetBotz Appliance itself by accessing the following URL:
For version 2:
https://ip_address_of_appliance/netbotzv2.mib
For version 3:
https://ip_address_of_appliance/netbotzv3.mib
What is the part number for a 7 hole neutral link with covers , that will accept 1 x 70mm and 3 x 35mm cables?
The part number for a 7 hole neutral link with covers , that will accept 1 x 70mm and 3 x 35mm cables is - L7/150
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=L7/150
L7/150
500V 370A 7 Hole Front Wiring Neutral Link. Black base and cover.
Dimensions: 162 x 53 x 55mm.
2 tunnels, 17mm diameter accommodate 150mm2 cable.
1 tunnel, 15.5mm diameter accommodate 120mm2 cable.
2 tunnels, 10mm diameter accommodate 50mm2 cable.
2 tunnels, 5.9mm diameter accommodate 16mm2 cable.
What are specifications of the fiber optic cable bearing part number 990MCO000xxx:?
It is a SERCOS SMA 1000-micron plastic fiber optic cable
- Diameter - 1mm plastic fibre
- Radius of curvature: >= 0.98 in (25 mm)
- The core's diameter in microns: 1000 (1mm).
- connector type: SMA
- Operating temperature range: between -40 °C and 80 °
- Maximum traction effort during installation: 25 kg/cab
rev 11-6-17
What hardware is required to add an M340 expanded backplane?
Adding an expansion rack requires an Extension rack Module (BMXXBE1000), Extension rack Cable and Terminators.
The BMXXBE2005 is an Extension rack kit that contains everything that you need including:
- 2 BMXXBE1000 extension rack modules
- one BMXXBC008K 0.8 meter extension cable
- one TSXTLYEX set of 2 line terminators
Other cable lengths available:
BMXXBC015K - 1.5m extension rack cable.
BMXXBC030K - 3m extension rack cable.
BMXXBC050K - 5m extension rack cable
BMXXBC120K - 12m extension rack cable
Legacy KB System (APS) Data: RESL212579 V1.0, Originally authored by DaSo on 09/25/2013, Last Edited by DaSo on 09/25/2013
Related ranges: Modicon M340
What is the part number for the Ethernet IP / Modbus TCP IP option card for the ATV32 series drives?
Issue:
What is the part number for the Ethernet IP/Modbus TCP/IP option card for the ATV32 series drives?
Product Line:
Altivar 32 series drives.
Environment:
All models, All serial numbers.
Cause:
Part number unknown.
Resolution:
The part number for the combination Ethernet IP/Modbus TCP/IP card for the Altivar 32 series drives is VW3A3616
What is the IP Rating for the motion sensor 753R?
The IP Rating for the sensor 753R is IP20.
Some of its key features are:
- 10A maximum load current
- Stand-by power consumption is less than 1W
- 3 Wire
- Neutral required
- 30 seconds warmup time
- 360°, circular detection field 14m diameter rated detection field at maximum sensitivity
- 5 seconds to 20 minutes timer delay range
- Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
- Length of sensor 141.5mm
- 72mm Diameter
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R
What is the current part number for a ECS series 360 degree motion sensor?
Unfortunately this product has been discontinued for some time.
The closest replacement to this sensor is a 753R.
Some of the key features are:
- 10A maximum load current
- Stand-by power consumption is less than 1W
- 3 Wire
- Neutral required
- 30 seconds warmup time
- 360°, circular detection field 14m diameter rated detection field at maximum sensitivity
- 5 seconds to 20 minutes timer delay range
- Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
- Length of sensor 141.5mm
- 72mm Diameter
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R
Where can I get the cable pinouts for the Profibus connector for the Altivar Process Drive?
Issue:
Where can I get the cable pinouts for the Profibus connector for the Altivar Process Drive?
Product Line:
Altivar Process Drive (ATV630, ATV930, ATV650, ATV950, ATV660, ATV960, ATV680, ATV980)
Environment:
All serial numbers for Altivar Process Drive
Cause:
N/A
Resolution:
Is there an CM2000 adapter plate for the ION75XX or ION76XX devices?
Yes, see image below.
________________________________________
Original article#
Date Created: September 17, 2010
Last Revised: September 17, 2010
Public
Original Author: LA
All content © 1992-2010 Schneider Electric
Legacy KB System (APS) Data: RESL203461 V1.0, Originally authored by LaAd on 09/18/2010, Last Edited by LaAd on 09/18/2010
Related ranges: ION75X0 RTU, ION7550/ION7650, CM2000 series
Where are the overload relays for use with LC2D reversing contactors?
Issue:
Identifying the appropriate overload relay to use with a reversing pair of contactors
Product Line:
Digest 177 Section 18 : Contactors and Starters - IEC
Environment:
North American Products
Cause:
Overload relay needed for use in reversing application
Resolution:
Reversing contactors use the same overload relays as non-reversing contactors.
Can an F-Line contactor be backfed?
Issue:
Can an F-Line contactor be backfed?
Product Line:
Digest 177 Section 18 : Contactors and Starters IEC
Environment:
North American Products
Resolution:
Yes. Electrically, the F Line contactor can be backfed. However, a UL inspector may have an objection, because of the L1 L2 and L3 line side marking and the T1 T2 and T3 markings on the load side.
What is the replacement for the hooped delrin lever arm shown in the Digest as 9007FA9?
Issue:
What is the replacement for the hooped delrin lever arm shown in the Digest as 9007FA9?
Product Line:
Digest 177 Section 21 : Limit Switches
Environment:
North American Products
Cause:
Needs the replacement for the hooped delrin lever arm shown in the Digest as 9007FA9.
Resolution:
The Digest incorrectly shows this unit as 9007FA9. The correct part number is 9007FA6.
Where can I find the part numbers for LED bulbs for 9001KM35L type LED modules?
Issue:
Where can I find the part numbers for LED bulbs for 9001KM35L type LED modules?
Product Line:
Harmony Pushbuttons
Environment:
All Products
Cause:
Product selection
Resolution:
For series J KM35L LED modules use the following numbers:
65088-052-10 Red 65088-052-11 Yellow
65088-052-12 Green 65088-052-13 Blue
65088-052-14 White
You cannot use these LED lamps in series H or earlier KM35L LED modules, as damage will result. If using Digest 172 listed bulbs in series J KM35L LED modules, they will be very dim. Lamp part numbers are also listed on the side of the light module.