The cover for a C2015/20 is a C2015/20C.
Yes it is and the part number is C2015/20-RD.
The part number for Stainless Steel cover to suit is a C2015/20C.
Yes, there are a few GPO's that are individually wired, they are C2016/2, 16/2MF, 2015/2V and 15/2V. In a weather proof option we have the WSC227/1/2
Not available, but Clipsal 2015/15 is available in red but it's horizontal.
Yes the part number is 221/20
The part no is 2015H2. It is 2 x single horizontal switched sockets side by side with a single frame.
The cut out for the C2016/2 is 30mm (H) X 200mm (W).
What is the ATS48 line voltage operating range?
Altistart 48, ATS48
The Altistart 48 is suitable for three phase supply voltages that range from 208VAC to 690VAC , 50/60Hz. The tolerance of the voltage supply is -15% to +10%.
What Padlock Device can be used on the 9001KR9R E-stop Pushbutton?
NOTE: These attachments will not work when the operator is supplied with a 2 1/4 inch diameter mushroom.
The dimensions for part number C2016/2 are:
159mm (L) 47mm (H) 28mm (D)
Mounting centres for part number C2016/2 are 122mm.
157/1P is a plastic Wall Box that will suit P2025/2.
The measurements for the C2016/2 are 48mm (H) x 160mm (W) x 28mm (D) with a mounting centre of 122mm
Unfortunately, No mounting block available.
EUSERC is an acronym for Electric Utility Service Equipment Requirements Committee. Formed in 1983, the purpose of the organization is to promote uniform electric service requirements among the member utilities, publish existing utility service requirements for electric service equipment and provide direction for development of future metering technology. There are approximately 80 utilities involved in EUSERC from 12 states. Not all EUSERC member utilities accept all metering devices that meet EUSERC specifications. So, although a device may meet EUSERC specifications, it may not be accepted for use by a specific utility company. Always check with the utility company for approval before using any metering device.
Standard 2 gang flush box will suit - part number 157/2
The part number for Brushed Aluminium cover to suit is P2004/2M -BA
The PDL version of the 2015XX is a PDL694XXWH.
Yes there is a P2025/2 with neons. The part number is P2025/2N.
This retractable lead is no longer in our product range and there is no alternative available.
No. Unfortunately, 801/20R is discontinued and there is no replacement.
The part number for the plaster bracket to suit the 2000/2 is 2155PRM/2.
There is no mounting block available for the 2025H2
No, the C2000 is 48mm x 160mm x 28mm with 122 mounting centres
Yes, the part number is a 2015D15
Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
No, it will trip on a phase unbalance.
CTA-ID : 2005929
Pumptrol pressure switches, Class 9013
Noryl SE-1X is used on 9013G devices for the cover, and on 9013F products with 3R rating.
CTA-ID : 2010510
C120 torque is 3.5 N-M.
CTA-ID : 2055521
XCSZ25. Sold in quantity of 10's.
Not available in the Medilec range, you can use the Clipsal 2000 Series 2015/15-RD or 2015/20-RD
AS3112 is used for standard 3 pin 10/15/20A sockets, AS3123 is for three phase round pin sockets.
Will the XVBC11 tulip fit with XVBL beacons?
Harmony Tower Lights
Yes, the XVBC11 tulip base will work with XVBL beacons when used with a support tube.
CTA-ID : 2011190
Wiggy Voltage Tester
Clarifying maximum voltage
600 volts AC, 250 volts DC maximum.
CTA-ID : 2010590
Yes ....as long as the switch meets the pressure range requirements . The switches designed for water pressure, as a group, will have a lower range of pressures. Note that a pressure relief valve, which is often desired for compressor loads , is not available with 9013FS products
CTA-ID : 2023020
The part number for a surround /cover for the 2025H2 is - 2000H2
The part number for metal wall plate 2000/2 will be 2155PRM2.
Please see page 28 of catalog 6729
dimensions 78mmH X 77mmW