What is the part number for cover to suit P2031VA?
The part number for cover to suit P2031VA is - P2001
Do you make a 2031VHA like the 2032VHA?
Unfortunately, we only make a 2 gang version.
Do you do a 2031VH in red?
Yes the part number is 2031VH-RD
Can you get a clipsal plate 2031VH with a 30HM-WE pre assembled?
No, unfortunately you will need to buy the parts separately.
Is there an alternative C-Bus Switch for 5031NL-WE?
Yes, one off 2031VH + one off 5031NMML
Is there a Permanent connection unit in the Medilec range?
No Medilec permanent connection unit
Use 2031VH with a 38TB Mech.
Is there a part similar to the grid plate 2031VX that has a terminal block on the back?
Yes, The grid plate has a terminal block on the back and is rated at 30A. The part number is 2031VXCB.
Is there an alternative C-Bus Switch for 5034NL-WE?
Yes, one off 2034VH + one off 5031NMML + three off 5031NMS
What is the white cover plate for a 2031VCS
The part code is 2000-WE surround cover plate
What is the Brushed Aluminum cover plate for the C2031VH
Part code C2031C-BA
What is mounting block to suit P2031VH?
Part no P2031VH will fit on either 449A or 449ASD mounting block
Does the 2031V66 come in architrave?
No it doesnt
Where should the twin brown wires be connected on 2031RC series?
The 2031RC series consists of 2031RC30, 2031VRC30, 2031RC10, 2031VRC10, ML2031RC10 and ML2031VRC10.
The twin brown wires power the Line Power Available LED. These wires must be connected into the Line Active and Neutral terminals with the incoming supply wires.
For further information please refer to the attached installation instruction
What is the part number for a prestige single gang switch?
The part number is P2031VA.
Does the SC2031VA have the same plate dimensions as the SC2025?
Yes, they are the same plate size however the enterals have different dimensions ie the back of the powerpoint m protudes less than the switch etc however it is wider....
What are the part numbers for a single / double prestige grid and plates and mechs
Part numbers are P2031VH (single) P2032VH (double) P30M (Mech)
Can we buy cover only of a saturn 4031VH product?
No, you will have to buy the whole product 4031VH plate and grid assembly.
Will part number 30PB fit into 4031VH plate?
Part number 30PB will fit standard into 4031VH plate.
Is there an alternative C-Bus Switch for 5032NL-WE?
Yes, one off 2032VH + one off 5031NMML + one off 5031NMS
Does the 4031VH come with other coloured interior?
No, unfortunately it only has the one colour.
what color of 30MD will suit 4031VH plate?
use 30MD-3A
Do you do the 2031V66 with double pole switches?
No, the 2031V66 does not have double pole mechanisms.
Some of the key features are:
- Switches have been re-designed to provide mechanisms that can be re-orientated horizontally or vertically
- 1 gang weatherproof switch
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66
Can the grid for the 2031v66 be purchased without mechs?
No, We do not supply or encourage this as the 2031v66 has a specific gasket set up to ensure weatherproof rating and this may be compromised if tampered with therefore we only sell them assembled.
What is the mech that fits in the 2031V66 switch?
Unfortunately we dont do the mech as a spare part it is essentually a 30 mech with a rubber seal between the contacts ant the dolly and we dont do that mech as a spare part.
Can you still get a 2033A in Desert Sand?
Is there an alternative C-Bus Switch for C5031NL-WE?
The following parts are required to build the equivelent: 1x C2031VH + 1x 5031NMML
Can part number 30M35 be used in 2031V66?
No. Unfortunately, part number 30M35 CANNOT be used in 2031V66.
What is the part number for a Brass cover for the classic range 2 gang switch - C2032VA?
The part number for a Brass cover for the classic range 2 gang switch - C2032VA is - C2032C-BS
For further information visit link below:-
https://www.clipsal.com/Trade/search-results?q=C2032C-BS
Saturn PB Switch DP 2way ?
There is No 4060 series option - use 30MD2-WE + 4031VH
Can I change the input power plug on my 120Vac Smart-UPS?
Issue:
Changing input plugs on Smart-UPS 2000VA or larger
Product Line:
Smart-UPS
Environment:
Smart-UPS 2000VA or larger
Cause:
All Smart-UPS 2000VA or larger have an input plug that is not a standard 5-15 household style plug.
Resolution:
The higher capacity of these UPS models require an input plug that is either 20amp or 30 amp (depending on model) rather than the traditional 15 amp household plug you may be more familiar with. The UL listing of the UPS assumes that the UPS is using the input plug for which it was designed. Modifying the input plug may affect the UL or other regulatory compliance. Schneider Electric does not recommend modifying the input plug of your Smart-UPS UPS or attached Smart-UPS Accesories (IE: Stepdown Transformers, PDU strips, ETC)
Note: If you decide to go against this recommendation and change the input plug of your UPS, please be aware that the functional capacity of the UPS will be limited by the input circuit.
(I E: An SMT3000 being supplied 15 amps is effectively a 1500VA UPS rather than the 3000VA that it is rated for.)
What is the part number for the 1 gang Iconic switch , and can the mech be rotated for horizontal or vertical switch plates?
The part number for the 1 gang Iconic switch , and can the mech be rotated for horizontal or vertical switch plates - 3041VA and yes can be mounted Vertical or Horizontal..
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=3041VA
Can a usb charger mech be fitted to the 4025xa?
No it can not - we recommend fitting the 30USBCM to the Saturn communication wall plates eg 4031VH
Is there a Double Pole mech in the Saturn range?
No, but you can use a 4031VH and a 30MD.
What plate is suitable for 30 series mech in Saturn?
Any 30 series mechanism will fit into the range of 4031vh -4036vh Saturn plates.
What Saturn plate will suit 30MBPR mech?
Any Saturn plate that accommodates 30 series mechs will be suitable
eg 4031VH to 4036VH
What is the difference between 4062ELEDM & 32ELEDM?
The part number 4062ELEDM suits Saturn 4061 plates, however
32ELEDM Ssuits 4031VH plates etc
Is there a double pole mech of 10amp for the Saturn series?
The part number 30MD into 4031VH to 4036VH plates.
What is the part number for the Surround to suit a 2034A ?
The part number is a
2003/4-WE , this is the surround for both 3 and 4 gang architrave plates in the 2000 series
For more information please visit the Clipsal website on the link provided.
https://www.clipsal.com/Trade/search-results?q=2003/4
Is there an alternative C-Bus Switch for SL5031NL-WE?
No alternative with the same style look, but it can be replaced with a different style look with the same functionality switch.
- It can be replaced with Classic C2000 Series Grid Plate and 30 Mech switches, one off C2031VH + one off 5031NMML
- It can be replaced with Slimline SC2000 Series Grid Plate and 30 Mech switches, one off SC2031VH + one off 5031NMML
Is the 2031V66 switch 2 way compatible?
Yes, as it is based on 30 series mech with 4 terminals it is 2 way compatible.
Some of the key features are:
- 1 gang weatherproof switch
- Standard size gridplate and surround complete with one 30M switch
- Vertical mount
- 116 mm Length x 76 mm Width x 30 mm Depth
- 84 mm apart Mounting centres
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66
I need a Saturn range mech and a telephone mech, what part's do I need
If you want 2 stove switches in one plate, you would need to use Clipsal 4032VH and 30M35 and for the telephone use a 30BTM and 4031VH
Can a HDMI mech fit a saturn series plate?
HDMI 30 series mechanism 30HDMIS-WE can fit into the 4031VH etc of the saturn series
on page 17 of the pocket - the grid & plates fit 30 series mechanism's
Is there a telephone mechanism in Saturn?
There is no telephone mechanism specific for Saturn range. However the 30 series telephone mechanism 30RJ64SMT-** /30RJ66SMT will fit on the Saturn communication plates. Eg 4031VH-PW
Will a 30USBC mech fit a 4061VH or similar plates?
No, a 30USBC mech will not fit a 4061VH or 4061PBL or similar plates
30USBC mechs will only fit a 4031VH or similar communication plates as 30USBC is a 30 series style of mech
Is there a 3 position switch available in the Saturn series?
No, there isn't a 3 position switch. The only way would be to use a 4031VH and a 30 Series 3 position switch.
For further information please visit
https://www.clipsal.com/Trade
What is part number for Saturn plate to accommodate 30RJ mechs?
30RJ mechs will only fit into Saturn 4031VH to 4036VH plates, as they accommodate any 30 series mechanism.