Yes the part number is 2031VH-RD
Yes, The grid plate has a terminal block on the back and is rated at 30A. The part number is 2031VXCB.
No, unfortunately you will need to buy the parts separately.
Yes, one off 2031VH + one off 5031NMML
No Medilec permanent connection unit
Use 2031VH with a 38TB Mech.
Yes, one off 2034VH + one off 5031NMML + three off 5031NMS
The part number for cover to suit P2031VA is - P2001
Unfortunately, we only make a 2 gang version.
The part code is 2000-WE surround cover plate
Part no P2031VH will fit on either 449A or 449ASD mounting block
The 2031RC series consists of 2031RC30, 2031VRC30, 2031RC10, 2031VRC10, ML2031RC10 and ML2031VRC10.
The twin brown wires power the Line Power Available LED. These wires must be connected into the Line Active and Neutral terminals with the incoming supply wires.
For further information please refer to the attached installation instruction
Part numbers are P2031VH (single) P2032VH (double) P30M (Mech)
No, you will have to buy the whole product 4031VH plate and grid assembly.
Part number 30PB will fit standard into 4031VH plate.
Yes, one off 2032VH + one off 5031NMML + one off 5031NMS
No, unfortunately it only has the one colour.
Part no A31VX will fit onto any standard wall box eg 449a
Part number B31VX is smaller than BSL31VH. Following are the dimensions:
B31VX 115mm (L) x 70mm (W)
BSL31VH 130mm (L) x 85mm (W)
No, We do not supply or encourage this as the 2031v66 has a specific gasket set up to ensure weatherproof rating and this may be compromised if tampered with therefore we only sell them assembled.
Unfortunately we dont do the mech as a spare part it is essentually a 30 mech with a rubber seal between the contacts ant the dolly and we dont do that mech as a spare part.
The following parts are required to build the equivelent: 1x C2031VH + 1x 5031NMML
A TV mech CAN NOT be put into 2015X. Must have at least 150mm of separation.
No. Unfortunately, part number 30M35 CANNOT be used in 2031V66.
There is No 4060 series option - use 30MD2-WE + 4031VH
No it can not - we recommend fitting the 30USBCM to the Saturn communication wall plates eg 4031VH
No, but you can use a 4031VH and a 30MD.
Any 30 series mechanism will fit into the range of 4031vh -4036vh Saturn plates.
Any Saturn plate that accommodates 30 series mechs will be suitable
eg 4031VH to 4036VH
The part number 4062ELEDM suits Saturn 4061 plates, however
32ELEDM Ssuits 4031VH plates etc
The part number 30MD into 4031VH to 4036VH plates.
No alternative with the same style look, but it can be replaced with a different style look with the same functionality switch.
- It can be replaced with Classic C2000 Series Grid Plate and 30 Mech switches, one off C2031VH + one off 5031NMML
- It can be replaced with Slimline SC2000 Series Grid Plate and 30 Mech switches, one off SC2031VH + one off 5031NMML
Yes, as it is based on 30 series mech with 4 terminals it is 2 way compatible.
Some of the key features are:
- 1 gang weatherproof switch
- Standard size gridplate and surround complete with one 30M switch
- Vertical mount
- 116 mm Length x 76 mm Width x 30 mm Depth
- 84 mm apart Mounting centres
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031V66
If you want 2 stove switches in one plate, you would need to use Clipsal 4032VH and 30M35 and for the telephone use a 30BTM and 4031VH
HDMI 30 series mechanism 30HDMIS-WE can fit into the 4031VH etc of the saturn series
on page 17 of the pocket - the grid & plates fit 30 series mechanism's
There is no telephone mechanism specific for Saturn range. However the 30 series telephone mechanism 30RJ64SMT-** /30RJ66SMT will fit on the Saturn communication plates. Eg 4031VH-PW
No, a 30USBC mech will not fit a 4061VH or 4061PBL or similar plates
30USBC mechs will only fit a 4031VH or similar communication plates as 30USBC is a 30 series style of mech
No, there isn't a 3 position switch. The only way would be to use a 4031VH and a 30 Series 3 position switch.
For further information please visit https://www.clipsal.com/Trade
30RJ mechs will only fit into Saturn 4031VH to 4036VH plates, as they accommodate any 30 series mechanism.