nipple cond pvc scr 40mm

NIPPLE COND PVC SCR 40MM

Catalogue Number: 243/40
nipple cond pvc scr 40mm
Colour: Grey
Colour: Per UOM Std.
  • Grey 1 PCE 1

Specifications

hide show
Product brand
Clipsal
Range of product
Series 243
Material
PVC (polyvinyl chloride)
Connector type
thread connector
Product destination
diameter: 40-40 mm tube
Length
40-40 mm
Standards
AS/NZS 2053
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP100802EN
Circularity Profile
N/A

Frequently Asked Questions

hide show

Is part number 242/50 suitable for underground?

Yes. Part number 242/50 is suitable for underground.

Is there a 246/50 in orange?

Yes we do but it is manfactured to order.

What would be a longer screw to suit Clipsals round j-boxes (Junction Boxes)?

The part number would be 248/20 which is a combination screw head 20MM 3/16 BSW.

What are the torque specifications for AB1VV435U and AB1VVN1035U terminal blocks?

Issue:
What are the torque specifications for AB1VV435U and AB1VVN1035U terminal blocks?
Product Line:
IEC Terminal Blocks 
 
Environment:
AB1VV Box Lug Blocks
Cause:
Assembly/installation, wiring
Resolution:
The torque specification for the AB1VV435U is .5-.7 N-m(4.4-6.2 inch-lbs).  and for the AB1VVN1035U, it is 2-2.5 N-m (17.6-22 inch-lbs).
CTA-ID : 2043140

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

What is the replacement for 16066 Timer?

The replacement for 16066 Timer is A9E16066.

A9E16066
iRTB relay-delays de-energizing a load upon closing-1C/O - Uc 24-240 VAC/24VDC

For more information see:
https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9E16066

What is the replacement lens cap for ZB2BW extended head push button?

Issue:
What is the replacement lens cap for ZB2BW extended head push button?

Product Line:
Harmony Pushbuttons

Environment:
All Products

Cause:
Product selection

Resolution:
ZB2BW93*. Replace * with color code desired:
1 - White
3 - Green
4 - Red
5 - Ambler
6 - Blue
7 - Clear

 

Typical 3-line drawings for Sepam Series 20, 40 and 80 current and voltage input connections

Goals and Symptoms

Typical 3-line drawings of Sepam 20/40 Feeder, Sepam 20/40 Main and Sepam 80 Main/Feeder.

Causes and Fixes

See attachment
Sepam.zip



AEDL3
Legacy KB System (APS) Data: RESL203669 V1.0, Originally authored by MiZe on 10/09/2010, Last Edited by MiZe on 10/09/2010
Related ranges: Sepam series 80, Sepam series 40, Sepam series 20

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

What is the operating principle of a detector for XSAV type rotation control?

Advantage and preferred uses

  • XSAVxx inductive sensors for rotation control have the special feature of combining data acquisition functions and processing by a pulse comparator in a single unit, thus creating an integrated rotation control device.
  • These devices provide a good solution for monitoring slip, belt break, coupling break, overloads, etc. in the following applications: conveyor belts, bucket elevators, lifting screws, grinders, crushers, pumps, centrifugal drying machines, mixing machines, etc.


Principle

The output signal of this type of sensor is processed by a pulse comparator integrated in the device.

The frequency of the pulses Fc emitted by the moving element to be monitored is compared with the frequency Fr preset on the device.

The output switching circuit of the sensor is at closed state when Fc > Fr and open state when Fc < Fr.

XSA-V sensors are particularly suitable for underspeed detection: when the speed of the moving element to be monitored Fc falls below a preset threshold Fr following deceleration, this detection leads to opening of the device's output circuit.

 

Other characteristics

  • Two ratings: 0.1 Hz-2.5 Hz and 2 Hz-50 Hz
  • Cylindrical inductive sensor, diameter 30
  • Range 10 mm

Special features:

  • Detection and comparison of pulses are integrated in the device
  • The frequency is preset in the device using a 15-turn potentiometer
  • Caution: The adjustment of the threshold is not linear according to the number of turns
  • For both ratings there is a 3-wire model with 12-48 VDC power supply and a 2-wire model with 24-240 VAC or 24-210 VDC power supply
  • Rotation monitoring becomes effective 9 s after the sensor MST
  • Connection via 2 m cable