lock nut nylon hexagon 25mm

LOCK NUT NYLON HEXAGON 25MM

Catalogue Number: 259/25
lock nut nylon hexagon 25mm
Colour: Black
Colour: Per UOM Std.
  • Black 1 PCE 1
  • Grey 1 PCE 1

Specifications

hide show
Range
Clipsal
Product or component type
lock nut
Accessory / separate part category
fixing accessory
Range compatibility
Material
nylon
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP100802EN
Circularity Profile
N/A

Frequently Asked Questions

hide show

Is part number 260/25 available in Orange?

No. Unfortunately, the 260/25 is only available in Grey.

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

Is there an extension ring to suit the 343?

Yes, there is the 93ER and also the 249/12 or 249/25.

What is the part number for 238A with 25mm spout?

The 238/25 has 1 x 25 mm spout & 2 x25 mm conduit entries.

Is the 279C25 conduit gland UV stabilized?

Yes this is UV stabilized.

Non Metallic Corrugated Conduit is manufactured to comply with relevant sections of AU/NZ
2053 and comes in Medium Dutyand Heavy Duty grades. Medium Duty products are UV stabilised.
Operative temperature range is -15°C to +65°C.
One of the main benefits of Non Metallic Corrugated Conduit is that it can be tightly coiled without effort or damage to wall sections, nor will there be any reduction in cross
sectional area. This significantlyreduces installation time in difficult situations and the number of fittings required.

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

What is the standard pack size of the 262/25?

The standard pack size of the 262/25 is 50

Some of the key features are:
  • Rigid Tube
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=262/25
 

Does Clipsal have a blank plate in the standard series, the same size as a 25/2?

Yes we do, it's the 31/2VX-WE.

What is the part number for a surface mount enclosure to suit 319HP Pneumatic timer?

238/25 is a surface mount enclosure with 25mm end entries that will suit 319HP.

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=238/25

How to calculate Energy readings from the raw Integer register data on an Energy Meter

Issue
The energy values are stored across two 16-bit integer registers on an energy meter. 

Product Line
Energy Meter

Environment
Reading and converting Modbus register values

Resolution
The Energy Meter stores energy across two 16-bit integer registers.

Register #1 and Register #2 (Modbus address 257/258 for Register #1 and 259/260 for Register #2). Register #2 is the High WORD and Register #1 is the Low WORD. 

The Multiplier/Divisor table states that both of these registers must be divided by 32 to obtain the real value from the raw data.
The Multiplier/Divisor should NOT be applied to both registers. It is applied to the final value of both registers.

To calculate the Energy the registers must first be arranged as the register list states [2] is the High word and [1] is the Low word.

To make [2] the High word it needs to be shifted to the left 16 bits.
To accomplish this multiply the value in [2] by 65,356.
You will then add this value to the value in [1].
The final value will be divided or multiplied by the correct scaling value. Please see the example listed below.

For this example we will assume an Energy Meter with 300 amp CTs. According to the Integer Multiplier/ Divisor table, 300 amp CTs will give a divisor value, (d), of 32 and a multiplier value, (m), of 0.03125.
We will assume the following register values.
Register #1 = 29,586
Register #2 = 31

Using Divisor Table
kWh = ([R2]*65,536+[R1])/d
kWh = (31*65,536+29,586) / 32
kWh = 64412.56

Using Multiplier Table
kWh = ([R2]*65,536+[R1]) * m
kWh = (31*65,536+29,586) * 0.03125
kWh = 64412.56

*Note the divisor will not always be 32 and the multiplier will not always be 0.03125. For the correct values please see the Integer Multiplier Table.
 

What are the part numbers for the 25mm PVC saddles and spacers?

The part numbers are 261/25 for the saddles and 261S25 for the spacers. 

Some of the key features are:
  • 63mm Length x 20mm Width x 29mm Overall Height
  • 48mm Mounting Centre
For further information please visit https://www.clipsal.com/Trade/search-results?q=261/25



 

What is part number for mounting clip to suit 25/2V?

The part number for mounting clip is a 154/2.

Will 25/2V double outlet, large size, vertical fit on 155P2 plaster bracket?

Yes, 25/2V will fit on 155P2. 25/2V is  Large Size Format 115 x 115mm, Double Power Outlet rated to 250V 10A.
For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=25/2V
User-added image

155P2 is a large plaster mounting bracket with 84mm mounting centre. For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=155P2
User-added image
 

What is the part number for the Relay and RPO connector for the Conext CL inverters?

One set of dry contact Relay and RPO connectors are provided along with the wiring box packaging.
The Relay and RPO connector is included in a plastic bag with other connectors, if it is lost, you will have to purchase another one.
The part number is 0J-0L2344 (Lit Kit IEC CL 20/25 kw Rohs package)

What is the part number of the mounting block to suit 25/2V Standard range, double socket outlet, large size format 115 x 115mm?

448SD and 448 are the mounting blocks to suit 25/2V, Standard range, double socket outlet, large size format 115 x 115mm.  Dimensions of the mounting block are as follows:

For further information , please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448SD
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448
448SD
User-added image
448
User-added image
 

Which wall box suits the large size, twin socket outlet 25/2V?

The wall box that suits the large size, twin socket outlet 25/2V is 257D2-GY.
Its key features are:
  • 2 gang
  • 84 mm x 46 mm mounting center
  • Suits universal wall construction
  • With 20 mm cut-outs one end and 25 mm cut-outs at other, impact resistant, deep-type
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=257D2