reducer pvc plain 50/40mm

REDUCER PVC PLAIN 50/40MM

Catalogue Number: 264/5M
reducer pvc plain 50/40mm
Colour: Electric Orange
Colour: Per UOM Std.
  • Electric Orange 1 PCE 1
  • Grey 1 PCE 1

Specifications

hide show
Product brand
Clipsal
Material
PVC (polyvinyl chloride)
Product destination
  • diameter: 40-40 mm tube
  • diameter: 50-50 mm tube
    • Length
      35 mm
      Standards
      AS/NZS 2053
      REACh Regulation
      Free of Substances of Very High Concern above the threshold
      REACh free of SVHC
      Yes
      EU RoHS Directive
      Pro-active compliance (Product out of EU RoHS legal scope)
      Toxic heavy metal free
      Yes
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)

      Frequently Asked Questions

      hide show

      What size Clipsal saddles are available?

      Size       Ctn Qty     Part Code
      16mm    50             261/16
      20mm   100            261/20
      25mm   100            261/25
      32mm    50             261/32
      40mm    50             261/40
      50mm    20             261/50

      Are the 265 series insulated boxes (suitable for numerous junctions and terminations) IP rated?

      The 265 series is a range of IP56 rated insulated boxes suitable for numerous junctions and terminations. Each box is supplied with a 3mm sealing gasket.

      This applies to the 265/1, 265/3, 265/4, 265/5, 265/7 and 265/7D.

      What are the dimensions of the 164/5 wall box?

      The dimensions of the 164/5 wall box are 234mm wide x 97mm high x 58mm deep.

      Some of the key features are:
      • Fixed nut
      • 5 gang
      • Standard size
      • for poured concrete
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=164/5

      What is the wall box to suit the B10/30/5 ?

       The part number for the wall box 164/5

      How do i seal up a 50mm hole in the 230DRAVL?

      Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50
       
       
       

      What is the maximum control voltage and logic input voltage for the ATS22....S6 and S6U soft starters?

      Issue:
      What is the max control voltage and logic input voltage for the ATS22....S6 and S6U soft starters?

      Product Line:
      Altistart ATS22

      Environment:
      S6
      S6U 

      Cause:
      Control voltage and logic input max voltages allowed.

      Resolution:
      The S6 version was primarily designed for the European market and has  control voltage range (for terminals CL1 and CL2) of 187V AC to 264.5V AC (220 -15% to 230 +15%)).
      The softstart then generates a 24VDC power supply (24VDC +/- 6 V) that is limited to 42 mA.  This supply can be measured between terminals +24 and COM on the control terminal strip and should be present when the 220V power is supplied to the softstart.


      The S6U was designed and qualified for the standard NEMA range, which is: 103.5 ... 126.5V AC and is primarily used in the US.
      The allowed voltage on ATS22•••S6U control terminals (input CL1 and CL2) is from the range: 93.5V ... 126.5V, 50/60 Hz (110 -15% to 115 +10%)



       

      What is the dimension of 1264/2M, 25mm (male) to 20mm (female) brass reducer?

      Dimensions of 1264/2M are as follows:
      A = 25mm
      B = 21mm
      C = 16mm


      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=1264/2M