SWITCH MECH 1-2W 10A HEAT
switch mech 1/2w 10a heat
SWITCH MECH 1-2W 10A HEAT
switch mech 1/2w 10a heat

SWITCH MECH 1/2W 10A HEAT

Catalogue Number: 30HM
SWITCH MECH 1-2W 10A HEAT
switch mech 1/2w 10a heat
SWITCH MECH 1-2W 10A HEAT
switch mech 1/2w 10a heat
Colour: White Electric
Colour: Per UOM Std.
  • Chrome Shadow 1 PCE 1
  • Black 1 PCE 1
  • Soft Grey 1 PCE 1
  • White Electric 1 PCE 1

Specifications

hide show
Range of product
  • Series 30
  • Standard Series
    • Product brand
      Clipsal
      Device presentation
      basic element
      Switch function
      1-pole
      Actuator
      rocker
      Number of rocker
      1
      Number of poles
      1
      Device mounting
      flush
      Fixing mode
      clip-in
      Surface finish
      glossy
      Local signalling
      without
      [Ue] rated operational voltage
      250 V AC
      Rated current
      10 A
      Marking
      heat
      Marking location
      marking on surface
      REACh Regulation
      Reference contains Substances of Very High Concern above the threshold
      REACh free of SVHC
      Yes
      EU RoHS Directive
      Compliant
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Circularity Profile
      N/A

      Documents & downloads

      hide show
      Filter items
      • All

      • CAD Files and Packs

      • Installation Instruction

      • Specifications

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      What is the cable for the Lexcom system

      Use VDIR534830 for the 300m drum

      How many Boxes of 305m 2D4P6IPV3B-BU in a pallett ?

      There are 36 boxes (Rolls) of 305M Cable per pallet.

      Is the 3105RG6Q3B RG6 quad shield coax 305m cable FOXTEL approved?

      The 3105RG6Q3B RG6 quad shield coax 305m cable is FOXTEL and Austar approved.

      The Foxtel approval number is F10129 and the Austar approval number is P07982.

      What is the part code for a Cat5 cable in pink?

      The part code is 5005C305B, sold in 305m boxes.

      What length does the 2D4P6AIPV3R-BU cable come in?

      2D4P6AIPV3R-BU comes in a 305M box

      What is the code for our external Cat6 Cable?

      The part code is ACT4P6UPEJ3RBK and it comes in a 305m Box.

      What is the HP size of a FLEX58D33N4?

      Issue:
      What is the HP size of a FLEX58D33N4?

      Product Line:
      FLEX58

      Environment:
      FLEX58D33N4

      Cause:
      Is this a 30HP or 40HP drive?

      Resolution:
      This drive is dual rated:
      30HP for a constant torque load
      40HP for a variable torque load

      According to data sheet of remote device, "Autonomy" is 16h. What is "Autonomy"?

      We speak about 30h of battery working time (autonomy) by continuous working.

      Is 30m series mech available in colour 3A?

      Yes, the part number is 30M is a -3A.


       

      whta is the Adaptor plate for ZB4 to go in a 30mm hole?

      The part number for the adaptor plate for mounting a ZB4 unit into a 30mm hole is ZB4BZ012.
       

      what is the part number for CAT7 cable.

      The part number is 2D4P7ALSF3R-OR.
      This comes in a 305m box and is orange in colour unlike Cat 6 and below which is normally blue.
      Please see Internet link for more products and detail relating to this product.
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=2D4P7ALSF3R

      Can I upgrade an E-Flex to a larger drive size by changing the ATV61 drive?

      Issue:
      Can I upgrade an E-Flex to a larger drive size by changing the ATV61 drive?

      Product:
      E-Flex

      Environment:
      All

      Cause:
      Can I change drive from an 25hp to a 30hp, for a 30hp rating?

      Resolution:
      No, not recommended. The E-Flex is designed for the horsepower rating it was order for.
      Other E-Flex components and certifications must be considered. This would include wire size, breaker size, contactors (if bypass).
      This could void the warranty and the UL listing.



       

      What is the maximum DALI line length?

      The maximum length of a DALI line is 300m (when using minimum 1.5mm cable). If there is a specific requirement to use a line length of over 300m, it is possible to use a device such as a DALI repeater. As this is not a DALI CONTROL product, a 3rd party device would need to be sourced

      Is there a 30M sensor?

      No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.

      Is 30M available marked SPA?

      Yes, part number is available as standard 30MSPA

      for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MSPA

      30mm 480V LED Light Modules

      Issue:
      Are there 30mm light modules for 480V with LED lights?

      Product Line:
      30mm Operators - GIC Product

      Environment:
      US Product

      Cause:
      Product Selection

      Resolution:
      There are several light modules available:
      9001KM5LG - green
      9001KM5LR - red
      9001KM5LY - yellow

      Do we offer a Keyed 30mm Emergency Stop Mushroom Head Push button

      Issue:
      Do we offer a Keyed 30mm Emergency Stop Mushroom Head Push button

      Product Line:
      9001

      Environment:
      Pushbuttons 

      Resolution:
      No. We don`t offer a key release mushroom button in any of the 30 mm lines. Only on the 22mm.

      What is the part number for a Green indicator for 30mm diameter hole 24VDC ?

      The part number for a Green indicator for 30mm diameter hole 24VDC is - 9001KM35LG & 9001G6

      For further information , visit links below:-
      https://www.schneider-electric.com.au/en/search/9001km35
      https://www.schneider-electric.com.au/en/search/9016

      What is the part number for a 30mm Cylindrical 2 wire proximity sensor with 15mm sensing distance, prewired 2 metre cable?

      The part number for a 30mm Cylindrical 2 wire proximity sensor with 15mm sensing distance, prewired 2 metre cable is - XS630B1MAL2
      For further information , visit link below:-
      https://www.schneider-electric.com.au/en/search/XS630B1MAL2
       

      What is the part code for a CBUS 30M wall switch (master)

       The part code is 5031NMML

      Is there a 30mm pusbutton turn to release Emergency Stop with trigger-action feature?

      Issue:
      Does Square D offer a 30mm pusbutton turn to release Emergency Stop  with trigger-action?

      Product Line:
      30mm Push Buttons                       

      Environment:
      9001 Type K and SK Heavy Duty Operators

      Cause:
      Clarify that Schneider Electric offers a trigger-action Emergency Stop.       

      Resolution:                                                                 
      The newly introduced 9001KR16 and 9001SKR16 Harmony 30mm Turn-to-Release includes the trigger-action feature.

      Do we offer a a flashing 24V pilot light in the 9001 30mm line? What is the part number for a Flashing amber 24 vdc pilot light 30mm?

      Issue:
      Do we offer a flashing 24V pilot light in the 9001 30mm line?  What is the part number for a Flashing amber 24 vdc pilot light 30mm?
      Product Line:
      30mm Push Buttons                       
      Environment:
      9001K/SK light modules
      Cause:
      Looking for a flashing pilot light.              
      Resolution:
      This is not offered in the 30mm lines.

      What is the dimension of a Heritage shallow to porcelain base versions

      Shallow approx 25mm + toggle
      Porcelain base 30mm + toggle

      What is the part code for a Harmony Stop Plug in 30mm

      No longer available use 30-20mm adaptor and 20mm plug

      What is the 30mm to 22mm adaption plate for pushbuttons?

      The adaptor is ZB2BZ4

      L1 VME What size Fixing Screws for the PDL 600 Series are available?

      16mm, 30mm and 50mm Long 

      What is the part number for 30M for 3 way installation?

      The part number for 30M for 3 way installation is 30MI.
      Please click this link for further information
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MI

      Is there a contact block in 30mm Push to Test Pilot Lights

      Issue:
      Is there a contact block in 30mm Push to Test Pilot Lights

      Product Line:
      9001

      Environment:
      Pushbuttons / Pilot Lights

      Resolution:
      Yes. 9001KA1 prewired.

      How is an ATV61 or ATV71 drive configured for a 2 part dual ramp?

      Issue:
      How is an ATV61 or ATV71 drive configured for a 2 part dual ramp?

      Product Line:
      Altivar 61 and Altivar 71 

      Environment:
      All models, All serial numbers

      Cause:
      Application requires the motor to ramp to a minimum speed in a short amount of time and then ramp from this minimum speed to full speed at a much slower rate.

      Resolution:
      The ATV61 and ATV71 drives have a split ramp function in Menu 1.7APPLICATION FUNCTIONS, Sub-menu RAMP.  Define the acceleration and deceleration in 2 steps, split at a certain output frequency.  The following parameters are involved:

      ACC = Acceleration for the lower part of the ramp.
      DEC = Deceleration for the lower part of the ramp.
      AC2 = Acceleration for the upper part of the ramp.
      DE2 = Deceleration for the upper part of the ramp.
      FRT = Ramp 2 threshold, the speed, in Hz. at which the drive switches between ramp 1 (ACC,DEC) parameters and ramp 2 (AC2,DE2) parameters.

      Example:

      ACC = 10sec
      DEC = 10sec
      AC2 = 60sec
      DE2 = 30sec
      FRT = 30Hz

      When the drive starts the motor with a 60Hz speed reference, it will ramp up from 0Hz to 30Hz in 5sec and then 30Hz to 60Hz in 30sec.  Total ramp up time is 35sec.   When stopping, it will ramp down from 60Hz to 30Hz in 15sec and then 30Hz to 0Hz in 5sec.  Total ramp down time is 20sec.
      Note that the ACC/AC2 times are defined as time to go from 0Hz to motor rated frequency(FrS) 60Hz.  DEC/DE2 is time to go from FrS to 0Hz.

      Difference between the 'STBXCA1003' or 'LU9RCD03' cable.

      Goals and Symptoms

      Difference between the 'STBXCA1003' or 'LU9RCD03' cable.

      Facts and Changes

      Advantys Configuration software.

      Causes and Fixes

      The pinouts for both cables are identical. The only difference is the type of connector that is used on
      the end of the cable and the length of the cable. The 'LU9RCD03' uses a straight connector and an
      angled connector and is 30cm long. The STBXCA1003 uses two angled connectors and is 4.5m long.
       


      Legacy KB System (APS) Data: RESL198335 V1.0, Originally authored by AlCh on 05/04/2009, Last Edited by AlCh on 05/04/2009
      Related ranges: Advantys STB

      If 755RPL is wall mounted, what is the minimum distance it can be from the ceiling?

      When wall mount the 755RLPSMA2, the minimum distance it can be mounted from the ceiling is 30cm with a maximum of 50cm.
      Some of the key features are:

      • New look design with easy to use test/hush button
      • Sealed-in rechargeable lithium backup battery
      • Quality optical chamber with stainless steel insect screen
      • Easy installation and maintenance
      • Wired interconnect feature (up to 40 alarms)
      • Optional relay or wireless interconnect bases
      • Backwards compatible with 755PSMA and 755SMA mounting bases
      • Robust digital design


      For further information please visit www.clipsal.com/Trade/search-results?q=755RLP

       

      How many Amps are the standard 30 mechanisms rated to?

      A standard 30M mechanism is rated at 10 Amps.
      Some key features are:
      • Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
      • Body fits 22 mm diameter hole
      • Motor rating is 100
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M

       

      What part should I use to mount a 22mm push button into a 30mm size hole?

      Issue:
      Is there any mounting kit or adapter that we can use for a 22mm to a 30mm hole?

      Product Line:
      22mm Push Buttons / Operator Interfaces

      Environment:
      All Product Lines

      Cause:
      Can not find it in the Digest

      Resolution:
      Use mounting kit part number ZB4BZ021.

      What is the part number for a 56 series 1 gang cover with a 30mm hole in the centre?

      The part number for a 56 series 1 gang cover with 30mm hole in the centre is - 56L1/30

      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=56L1/30

      User-added image

      What is the part number for a 2 position 30mm diameter 9001K key selector switch head lockable in OFF position?

      The part number for a 2 position 30mm diameter 9001K key selector switch head lockable in OFF position is - 9001KS11K1

      For further information, visit the link below:-
      https://www.schneider-electric.com.au/en/search/9001KS11K1
      User-added image

      What is the part number for a punch for the 30mm hole for the 9001 K, SK, and KX operators?

      Issue:
      Does Square D offer or have a tool for punching/drawing a hole for 30mm push buttons?

      Product Line:
      Harmony Pushbuttons

      Environment:
      All Products

      Cause:
      Need to make a knock out on the undrilled enclosures for 30mm operators.

      Answer:
      Square D doesn not offer that tool.  We can recommend Greenlee knoct out punch #60242.

      What is the Maximum run of Cat 7a Cable 2D4P7ALSF3R ?

      All category data cables are defined by their maximum bandwidth at 100m. So 100m is the maximum recommended cable run.

      Cat 7A only comes in orange sheath to distinguish from other Data cabling and is supplied in a 305M box.

      Please see following link for technical specifications.
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=2D4P7ALSF3R

      Is there RG6 cable available that is suitable for underground burial?

      Yes, we sell RG6 Cable that is able to be buried. The 3105RG6Q3RF is flooded cable with an anti-corrosive sealant impregnated into the body of the shielding.

      Some of the key features of this product:
      • Coaxial cable to suit satellite TV
      • Cable type: RG6
      • Quad shield
      • Flood burial
      • Pack size: 305m reel
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=3105RG6Q3RF

      User-added image

      What is the part number for the standard 30M rocker mech with the red indicator mark on the top ?

      30MRD-WE (White)

      Are the 9001K51 and 9001K52 closing plate metal or plastic?

      Issue:
      Requested to clarify if the 9001K51 and 9001K52 is metal or plastic before purchase.
      Product Line:
      30mm Closing Plate
      Environment:
      30mm K and SK control stations, 9001K51 and 9001K52 30mm 30 mm 9001 9001k plug hole enclosure ky sky kyp skyp control station box accessories accessory   Push Buttons
      Cause:
      Request from vendor before purchase is placed
      Resolution:
      The closing plate both 9001K51 and 9001K52 is plastic with a metal ring nut that secures the plate to the enclosure.  Meets UL and Nema 1, 2, 3, 4, 4x, 6, 12, and 13.
       

      What are the dimensions of the 4FCC15SK ?

      Dimensions are Height 347mm , width 514mm and depth of 30mm

      What is the mounting hole diameter of a 30mm pushbutton?

      Issue:
      What size is the mounting hole for a 9001KX  30mm pushbutton?

      Product Line:
      Pushbuttons and Operator Interface

      Environment:
      9001K, 9001SK and 900KX 

      Cause:
      Product Features

      Resolution:
      31 mm or 1.22 inches.

      Is a 9001KY3 available with an extra conduit entry in the top?

      Issue:
      Is a 9001KY3 available with an extra conduit entry in the top?
      Product Line:
      30mm Enclosures
      Environment:
      9001KY/SKY Control Stations
      Cause:
      Need clarification before control station is installed.                        
      Resolution:                                                                 
      No, the 9001KY enclosures have a bottom conduit opening standard. Extra conduit openings are not available.
       

      What is the part number for 30M with red dot on the dolly?

      The part number is 30MRD-WE.
      Please click this link for further information
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MRD
      User-added image

      What is the part number for Prestige 30M with neon?

      The part number is P30NM

      Please click this link for further information https://www.clipsal.com/Trade/Products/ProductDetail?catno=P30NM

      User-added image

      Do you have a 20A mechanism marked heat in a 30M style mechanism?

      No. Unfortunately this would need to be done as a special and be quoted up by the quotes team.

      Is there a 30M labelled heat in 16A?

      Unfortunately, this part is unavailable. we only offer a 10A version. The part number for the 10A version is 30HM.

       

      How can you set up preset speeds on the ATV630 and ATV930 drives?

      Issue:
      How can you set up preset speeds on the ATV630 and ATV930 drives?

      Product Line:
      Altivar Process ATV600 ATV900

      Environment:
      All

      Cause:
      Setting up preset Speeds

      Resolution
      Complete Settings >Preset Speeds > 2 Preset Speeds = DIX, then go to  Preset Speed 2 = (desired frequency) 30hz or DIX  then go to  Preset Speed 4 and set up your 3rd and 4th speeds.. See the table below. 
      The manual contains a truth table that explains which inputs need to be On/Off for multiple preset Speeds to work, see example attached.

      https://www.schneider-electric.us/en/download/document/EAV64318/
       

      What is the part number for a 30M in Arctic Silver?

      The part number for a 30M in Arctic Silver is 30M-3A.

      Some of the key features are:

      • Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
      • Body fits 22 mm diameter hole
      • Motor rating is 100


      For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=30M







       

      What is the part number for a 30mm speed potentiometer to use with Altivar drives?

      Issue:
      Customer does not want the ATVPOT25K, because this is a 22mm operator.  The end user only wants to use 30mm operators.

      Product line:
      Altivar

      Environment:
      all

      Cause:
      n/a

      Resolution:
      9001K2107 is a 5k ohm, 30mm speed potentiometer available from Schneider Electric.  This inlcudes the operator, speed pot and legend plate. 
      See attached screen shot for other options, but remember to confirm the allowable potentiometer range for the specific drive.



       
      Show More