PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly

PLUG REMOVE 30SERIES DOLLY

Catalogue Number: 30P
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
PLUG REMOVE 30SERIES DOLLY
plug remove 30series dolly
Colour: White Electric
Colour: Per UOM Std.
  • Black 1 PCE 1
  • White Electric 1 PCE 1

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Device application
circuit identification
Depth
10 mm
Length
21 mm
Width
21 mm
EU RoHS Directive
Compliant

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Installation Instruction

  • Specifications

Frequently Asked Questions

hide show

What is the blanking module for the Clipsal range

Part code is 30P for the blanking module

Do you do a 56/32 with one spot for a 30 mech not two?

No unfortunately we dont make that part you would need to place a 30P to fill one of the holes.

What is part no for blank module to suit Saturn Zen

Unfortunately there is no blanking module available

for Saturn Zen can use 30P however colour likely to be different

Do you do a SC2025XA without the middle switch but has a blanking plate?


No, this is not a standard item.
Suggest you purchase a 2025XA remove the switch and put the blank 30P in there.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SC2025XA

Is there a intermediate version of the 306 pull cord switch?

No unfortunately this part is unavailable.

What is the code for a Prestige Blank mech?

P30P (indent)

Do you have a 2 gang version of the 30T architrave switch?

Yes, we do have a 2 gang version of the 30T architrave switch. The part number is 32TA.

What is the clipsal part number for the blanking plug for saturn series?

the part number is 30P.

Is the PDL 30A switched

 No it is not

Is part number 30PB available in Black?

Yes. Part numbers 30PB & 30PBL  are available in Black.

Will part number 30PB fit into 4031VH plate?

Part number 30PB will fit standard into 4031VH plate.

Is the Clipsal 30N 24v DC

Yes the 30N24 is suitable for AC and DC loads

Is the Clipsal 30PB pushbutton latching or non latching

 It is latching

According to data sheet of remote device, "Autonomy" is 16h. What is "Autonomy"?

We speak about 30h of battery working time (autonomy) by continuous working.

What is the wattage of the 30V lamp DL1BA030?

Issue:
What is the wattage of the 30V lamp DL1BA030?

Product Line:
Harmony Tower Lights

Environment:
All Products

Cause:
Product Features

Resolution:
4W


CTA-ID : 2017901

Is there a 24V version of the 30N neon mechanism?

Yes,  there is a 24V version of the 30N neon mechanism. The part number is a 30N24.
Some of the key features are:
  • 24V
  • Suitable for DC loads
  • Fits 30 Mechanism series plates
  • Multiple colours available
For further information please vist https://www.clipsal.com/Trade/Products/ProductDetail?catno=30N24



 

What Grade of Steel is used for Metalplate?

The BSL range uses Grade 304 Steel.

Is 30m series mech available in colour 3A?

Yes, the part number is 30M is a -3A.


 

What is the part number for cat 5 cable in 305 mtr roll?

The part number is 2D4P5IPV3B

Please click this link for more information
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2D4P5IPV3B

User-added image

In the Clipsal Saturn Series is the 30PB 2 way, is there an intermediate mech in that series

Yes, 30PB is 2 way.  The part number for the intermediate mech is 30PBI.

What do I need to put together a single phase 30A 56 Series RCD

Use 56CB4 + A9R51240 40amp RCCB

Does Clipsal do a 30PB in brown?

No, we only have the 30PB in White, Black, Blue, and Red.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PB 

What are the horsepower ratings on a LUB12 U Line motor starter?

3Hp at 200/208V, 3Hp at 220/240V, 7.5Hp at 460V and 10Hp at 575/600V.



CTA-ID : 2054124

SCP3xx Model 300 Processors Instruction Bulletin 30598-103-01

Attached is the SCP3xx Model 300 Processors Instruction Bulletin 30598-103-01.

Does Vijeo Designer Support the Rockwell Micrologix 850 controller?

No, Vijeo Designer does not support the Rockwell Micrologix 850 controller.

Is the Indicator neon mechanism 30N24 DC compatible ?

Yes, the 30N series can be used on either AC or DC voltages.

What is part number for Neon indicator in white?

Part 30N is not available in White

The standard colours are Transparent,Green,Red,Blue & Amber.

What colours are the 30PB, push-button switch available in?

The 30PB is available in both black and white.
 

Is there a 30M sensor?

No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.

Is 30M available marked SPA?

Yes, part number is available as standard 30MSPA

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MSPA

What is the part code for a CBUS 30M wall switch (master)

 The part code is 5031NMML

What is the part number for 30M for 3 way installation?

The part number for 30M for 3 way installation is 30MI.
Please click this link for further information
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MI

Does Clipsal manufacture a momentary ceiling switch?

Unfortunately not. We do not have momentary ceiling switch. We have latching ceiling switches, part numbers below
343-BR or 343-WE is 2 way 10A
342-BR or 342-WE is 1 way 10A

The 302 is no longer available
 

What is the part number for a 30PB momentary mech?

The part number is 30PBBP

Please click this link for further information
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBP

 

What version of Colour Touchscreen do i have?

You can confirm the version of the Colour Touchscreen you have by checking the pin configuration on the Colour Touchscreen's power supply

5000CTC V1 - 50xxCTC -  4 pin power supply - 5000CTCPS - 5VDC 30W 1.5A 90-264VAC 50/60Hz
5000CTC V2 - 50xxCTC2 - 7 pin power supply - 5000CTCPS/2 - 5VDC 30W 1.5A 90-264VAC 50/60Hz
5000CTC V3 - 50xxCTC3 - 2 pin power supply (green phoenix connectors) - 5100P24/2700AU - 24VDC 65W 2.7A 100-240VAC 50/60Hz

Is there a blank mech that can be installed into the saturn plates similar to 30p?

 
There is no such option but if the switch mech is removed from behind the plate then the push button cap can remain, alternatively replace with 4060vx

Is there one gang vesion of 56/32 adaptable enclosure to take 30 series mechanisms?

Unfortunately not. We do not have one gang version of 56/32. The unused gang can be blanked off using 30P, blanking mechanism.
For further information, please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=56/32
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30P

What is the HP size of a FLEX58D33N4?

Issue:
What is the HP size of a FLEX58D33N4?

Product Line:
FLEX58

Environment:
FLEX58D33N4

Cause:
Is this a 30HP or 40HP drive?

Resolution:
This drive is dual rated:
30HP for a constant torque load
40HP for a variable torque load

What is the impedance of the analog input AI1 on the ATV312?

Issue:
Analog input one impedance of the ATV312

Product Line:
ATV312

Environment:
All models and serial numbers

Cause:
None

Resolution:
The impedance of AI1 on the ATV312 is 30K ohms

Support on Buildings Management Systems and Pelco Security Solutions

 For support on Buildings Management Systems and Pelco Security Solutions please visit:  https://buildingskb.schneider-electric.com/

Explanation of circuit breakers in 30 amp rPDU's

Product Line
  • Rack Power Distribution
    • AP7XXX, AP7XXXB, AP8XXX series

Environment
  • All serial numbers

Resolution
Circuit breakers are in place to protect the branch circuit and its conductors. With respect to a 30A breaker, all components employed in the circuit (downstream from the circuit breaker) shall be rated for 30A use. In a scenario where a 30A circuit breaker is providing power to a 20A rated outlet, the outlet, load plug, load cord and load are rated for 20A use, thus sized for this rating. In this scenario there is inadequate protection for the outlet and all connected equipment, and potentially (and most harmfully) the conductor that is supplying the outlets themselves.

In North America, Canada, and Europe, PDU's are evaluated under UL/CSA/EN/IEC 60950-1. This standard requires circuit breaker protection when the rating of an output is less than the rating of the input. A PDU with a 30A input plug and 20A receptacles must have circuit breakers. Section 2.7 of the 60950 standard states: "Protective devices necessary to comply with the requirements of 5.3* must be included as part of the equipment" 

*5.3 is the evaluation of abnormal operating and fault conditions.


In North America, the requirement is based on NFPA 70, the National Electrical Code. In general, in the United States, you can have any outlet rated less than 20A protected by a 20A breaker. However, these outlets must have protection rated no less than the outlet rating and no more than 20A. A 30A outlet must be protected by a 30A breaker and may not have anything larger or smaller.

Europe has very similar rules to North America. The main difference is the rating of receptacles and breakers. In Europe, you typically have 10A or 16A outlets protected by a 16A breaker, but the breaker rating can be no more than 16A.

Canada places additional restrictions. In Canada, a 15A outlet must be protected by a 15A breaker. The only exception is the "T-Slot" 20A outlet that accepts either 15A or 20A plugs. This outlet may be protected at 20A.


If a PDU has a 30A plug and 30A receptacles, it will not require and internal circuit breaker. The 30A plug forces it to be plugged into a 30A branch circuit, which will have its own 30A breaker. The PDU can then rely on the branch circuit's breaker rather than an internal breaker.

If a PDU has a 30A plug and 20A receptacles, it must have internal 20A branch rated breakers for the receptacles. The 30A protection of the branch circuit is too high to be safe for the 20A outlets.

Can part numbers 30PB or 30PBL be used as a dimmer?

Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
31E2PUDM is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
one-way operation only.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM

What is the difference between 30PB and 30PBBP push button mechanisms?

30PB is a latching ON/OFF push-button switch mechanism, Impress Series, with No LED Indication, 250V 16AX/20A - 1 way / 2 way.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PB

30PBBP is momentary / Bell Press push-button mechanism, Impress Series, with No LED Indication, 250V 16A.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBP

How many Amps are the standard 30 mechanisms rated to?

A standard 30M mechanism is rated at 10 Amps.
Some key features are:
  • Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
  • Body fits 22 mm diameter hole
  • Motor rating is 100
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M

 

End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

Issue:

End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

Product Line:

NetBotz

Environment:

NetBotz version 1 WallBotz 300, 300B and RackBotz 300 and 303

Cause:
End of Life, End of Support

Resolution:

End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

The following NetBotz products will reach the end of their support life on January 31, 2005:
WallBotz 300B
WallBotz 300
RackBotz 303
RackBotz 300

After that date, NetBotz may not take support calls or E-mails regarding these products. NetBotz also may not issue any further software releases or patches for these products after that date. 

Please note that the Rack and wall versions of the 310 and 400 units are also end of support

What is the part number for the standard 30M rocker mech with the red indicator mark on the top ?

30MRD-WE (White)

What is the part number for cat 6A shielded cable?

The part number for the shielded 4 pair FUTP CAT6A LAN cable, LSZH, 305 metre reel is 2D4P6ALSF3R-BU.

What is the lowest profile switch available?

You can try the Clipsal BSL31VH or BBSL31VH with a 30PB mech.
The profile will be not much more than the 1.2mm of the plate.

What is the shroud to suit the 30PB?

The shroud to suit the 30PB is the 90FS-BK.

How much power does the led switch use?

We do not have specific data on our led and neons.
A generic led or neon of a simillar size would be approximatley 0.138 Watts.


References:
60PBL
30PBL
30/2NM
30N
Show More