momentary push button sw c/w

MOMENTARY PUSH BUTTON SWITCH C/W

Catalogue Number: 30PBBPL
momentary push button sw c/w
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE 1

Specifications

hide show
Range of product
  • Impress
  • Series 30
    • Product or component type
      push-button
      Product brand
      Clipsal
      Device presentation
      basic element
      Actuator
      push-button
      Local signalling
      indicator light
      Material
      plastic
      [Ue] rated operational voltage
      250 V AC
      Inrush current
      16 A
      Depth
      10 mm
      Length
      21 mm
      Width
      21 mm
      EU RoHS Directive
      Compliant
      Circularity Profile
      N/A

      Frequently Asked Questions

      hide show

      What is the colour of the LED , in the 30PBBPL?

      The colour of the LED , in the 30PBBPL is - Blue

       

      Do the Clipsal Impress Switch Mechanisms (30PB, 30PBL, 30PBBP, 30PBBPL and 30PBI) fit into the Clipsal Slimline series?

      YES, they also fit into the Clipsal Classic C2000 Series, Clipsal Standard Series and into the Saturn Series custom Grid and Plates to suit 30 Series mechanisms.

      Is the 30PBBPL avail in black ?

      No only white

      What is the part number for the 30 series momentary press mech for Zen range with led?


      The 30PBBPL will fit the Z403* plates. (30 series)
      The 60PBBPL will fit the Z406* plates. (60 series)
       

      What is the difference between PDL 60PBL and a PDL 60PBBPL

      PDL 60PBL is latching and PDL 60PBBPL is a momentary unit

      2031VETR3 - is it an intermediate switch? Can it be used in a stairwell to control a load from three floors?

      2031VETR3 is three wire switch. 
      Additional switches, 30mbp or the 30pbbp, can be installed in parallel to activate the timer from more than one location.

      Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.
       

      What series of mechs are used in the Saturn Zen plates for a Bell Press mech ?

      The Zen plate use 60 series mechs , the momentary bell press mech is a 60PBBP or 60PBBPL if led is required.

      Is the 60PBBPL a dimmer?

      No, this mechanism is a momentary press. Depending on the fitting if it has a dimmable ballast with control gear a 60PBBP can be used inconjunction however, it is not a dimmer. If you require a push button dimmer please use a 4061E2PUDM.

      What light switches should you use with a SILC system

      Any momentary push button mech which is rated for 240v.

      Examples of this are 30PBBP or the 60PBBP

      Is non latching mech available in Saturn series?

      Yes, part number 60PBBP or 60PBBPL  with Saturn grid & plate.
       

      What is the momentary press mech switch for the Saturn Range

      It is 60PBBPL

      Is the 30PBI momentary?

      No it isn't but the 30PBBP is

      What is the press mech in the Saturn range?

       The 60PBBPL is a 2way momentary 60 series mech.

      Does Clipsal offer a double pole bell press?

      No, only a single pole bell press switch is available

      Part name is either 30MBP, 30PBBP or 60PBBP for Saturn plates

      What is the code for a Push Button Switch, Momentary Action in the Saturn Zen range?

      The 60PBBPL is the Momentary Action Push Button Switch to use with the Saturn Zen range

      Please visit the technical page at clipsal.com for further information about the 60PBBPL - https://www.clipsal.com/Trade/Products/ProductDetail?catno=60PBBPL
       

      What is the difference between 30PB and 30PBBP push button mechanisms?

      30PB is a latching ON/OFF push-button switch mechanism, Impress Series, with No LED Indication, 250V 16AX/20A - 1 way / 2 way.
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PB

      30PBBP is momentary / Bell Press push-button mechanism, Impress Series, with No LED Indication, 250V 16A.
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBP

      Is there a a bell press mec in the Saturn series?

      Yes there is it is the 60PBBP.

      What pushbutton is used in Zen series plates?

      The Zen series uses the same push buttons as the Saturn series.
      60PB - Push Button
      60PBL - LED lit push button
      60PBI - Intermediate push button
      60PBBP - Bell Press push button
      60PBBPL - LED Bell Press push button

      For further information on these products please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60PBL

      User-added image
       

      Can you get a 60PBI with an LED?

      No, you need the PBIKIT which is a relay which sits in the ceiling, you require a switch wire to 60PBBPL which is a bell push button.

       

       

      Is there a Clipsal blank 30 Series press mech rocker?

      No, the rocker version has press engraved on it to identify that it is a spring return (momentary) mec.
      The 30 series pusbutton (30MBP) or Impress series pushbutton (30PBBP) are both blank, but the rocker version (30MBPR) is only available engraved.

      Is there a way to have a 3-way switching situation with Led indicators, in the Saturn range?

      Yes, there is.  You need to have 3 x 60PBBPL and the PBI/KIT.
      For further information, visit the link below:-​
      https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001603.pdf
       

      Does the 60PBBP make contact when you press the button?

      Yes it is a momentary press.

      Does the 60PBBP have an LED?

      No, the 60PBBP does not have LED. However, we do make a LED version. The part number is 60PBBPL.






       

      What products could be used to have have a weather proof Bell Press switch?

      By combining the WS229VH and the 30PBBP together , it will be a weather proof bell press switch with an IP rating of 56.
      The WS229VH is able to accept any 30 series mechanisms.
      For further information on the WS229VH please follow below link...
      https://www.clipsal.com/Trade/search-results?q=WS229VH
      User-added image

      Do we have a 60PBI with LED?

      We do not do 60PBI with LED but we do have a PBI/KIT that can be wired with 60PBBPL at each location with the impulse relay to enable the Led to work with the pushbuttons this will light up all 3 of the switches in conjunction with each other.

      Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

      Do you do a 60PBBP with double pole?

      No unfortunatley we do not make such a product

      Which type of switch mechanism is used for the wall switch on the SILC system?

      A standard bell press mechanism is used (momentary action). The products are currently in our Electrical Accessories range and the references are: 30PBBP-WE (suits Standard ranges, 2000, C2000, etc) and 60PBBP (suits Saturn and Saturn ZEN).
      Please follow link below to find out more information of this product:
      https://www.clipsal.com/Trade/search-results?q=silc

      Can i wire multiple 30PBBP momentary press mechanisms in parallel with the 2031VETR3 time delay switch?

      It is a momentary press so there isn't any restriction in how many mechanisms are wired in parallel providing your cable length doesn't exceed 100M.


      Some of the key features are:
      • 0 - 15 Hours timer range
      • Surface mounted
      • 84 mm mounting centre
      • N.O/N.C contact type
      • -10 to 50 deg C
      • Improved terminal design-Ease of wiring termination and simplified installation
      • Connection for remote push-button switch-Permits remote control of timer from any number of locations using a standard push-button switch.
      • Variable timer settings-Allows the timer to be used for maximum energy savings in a wide range of applications
      • New enclosure design-Provides more room for wiring and easier fitting into standard wall box
      • State of the art microprocessor design-Highly reliable and accurate timing
      • Near zero crossing turn on switching-Prolongs the life of the relay contacts - in excess of 100,000 operations
      • Simple set up procedures-Fast installation
      For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR3


       

      Do you do a 2031VETR3 in Classic Series?

      No unfortunately we don't do a 2031VETR3 in Classic Series. However, this unit can be remotely operated. Therefore you can place the 2031VETR3 In the wall cavity and can be triggered by a C2031VH plate with a 30PBBP switch mechanism. This insures the correct look while obtaining correct functionality.


       

      What is the code for a Slimline Permanent Connection Unit

       Part codes you need to use SC2032VH + 30PBL + 38TB

      Is there a OneTouch with PCU

      Use a 4032VH + 38TB + 30PBL - not one touch but closest match

      What colour is the LED on the 30PBL series?

      The LED's are Blue only.

      Is there a Saturn push button timer plate?

      No there is not, however using a 2031VETR3 with a 60PBBP to remotely switch it from a saturn plate will achieve the same result.

      What is the Clipsal - press Momentary Mechanism Push button in black

      Code = 30PBBP-BK

      Can part numbers 30PB or 30PBL be used as a dimmer?

      Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
      31E2PUDM is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
      one-way operation only.
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM

      What is part number for momentary push button to suit Saturn Zen?

      The part number for the momentary push button to suit Saturn Zen is a 60PBBP or 60PBBPL.

      For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=60PBBP


      User-added image

      What is the 2way push button (latching) for the Saturn Range

       The parts you need is 60PBL if the 406* plates are used and a 30PBL if the 403* plates are used

      Is there a colour choice for the indicator on 30PBL?

      No colour choice for the LED indicators on 30PBL. The indicators are blue in colour on the 30PBL.

      What is the part name for an architrave, single gang switch and blank plate in brown?

      The part names are as follows: C2030-BR, a C2031-BR and a 30P-BR.

      Can a run on timer be operated remotely by bell press mech?

      Yes, the 2031VETR-WE can be operated by a 30PBBPL-WE

      What is the part number for an intermediate switch in the Saturn Series?

      The part number for an intermediate switch in the Saturn Series is a 60PBI.
      Unfortunately this switch mechanism doesn't have an LED option.

      If an LED option is required you will need the PBI/KIT as well as the mechanisms 60PBBP in every switch location.

      Please note aditional wirring will be required.

      For furtherinformation please visit www.clipsal.com/Trade/Products/ProductDetail 


       

      Can the LED on the 30PBL switch operate without a neutral at the switch?

      Yes the 30PBL can be wired up so the LED will work. Unfortunately without a neutral there is only one method of wiring which will have the LED on permanently until the light is switched on then the LED will turn off. It is strongly Suggest you speak to you electrician as he will have the appropriate skills to achieve the function of the LED's.
      Some of the key features are:
      •  Blue LED indicator
      • One way/two way switching facility with loop terminal
      • Retrofit option in to any 30 series aperture
      • Suitable for fluorescent loads Up to 16AX
      • Shrouded in-line Terminals provide protection during installation 
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBL   
       

      What is the part number for a 30 series bell press switch mech with LED indication?

      The part number for a 30 series bell press switch mech with LED indication is - 30PBBPL

      For further information ,visit link below:-
      https://www.clipsal.com/Trade/search-results?q=30PBBPL
      User-added image

      Is there a two way push button dimmer in the Saturn/ ZEN Series?

      There is no direct product that can achieve this, however we can offer a solutioin so this can be achieved. The solution involves a typical multi-way LED Lighting dimming control set up using ZEN Push Button Bell Press and ICONIC 2-Wire Dimmer Push Button. With the iconic dimmer connected with the 60 Series bell press, the bell press will work like ICONIC Controllink and will dim up and down on a long press,
      turn on and of with a short press.
      For further information please view the attached wiring diagram.