No colour choice for the LED indicators on 30PBL. The indicators are blue in colour on the 30PBL.
YES, they also fit into the Clipsal Classic C2000 Series, Clipsal Standard Series and into the Saturn Series custom Grid and Plates to suit 30 Series mechanisms.
The shroud to suit the 30PB is the 90FS-BK.
Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
one-way operation only.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
The 30PB is available in both black and white.
The parts you need is 60PBL if the 406* plates are used and a 30PBL if the 403* plates are used
Part codes you need to use SC2032VH + 30PBL + 38TB
Use a 4032VH + 38TB + 30PBL - not one touch but closest match
The indicator LED is Blue
No. unfortunately, part number 30PBI is not available in Black.
30PBI is not available with an LED
No it isn't but the 30PBBP is
30PBI is the 30 series intermediate mechanism. This does not have an LED indicator.
No it does not.
30PBI - Push-button Impress Series, No LED Indication, 250V 10AX - Intermediate Push-button.
No, the 30PBI is not available in Black as a standard item. However, it can be created as MTO ( made to order ) custom special.
Yes. Part numbers 30PB & 30PBL are available in Black.
Part number 30PB will fit standard into 4031VH plate.
60PBI is the Saturn intermediate mechanism. This does not have an LED indicator.
Yes the 60PBL is a 1 way / 2 way push button with LED.
Yes the 30PBL can be wired up so the LED will work. Unfortunately without a neutral there is only one method of wiring which will have the LED on permanently until the light is switched on then the LED will turn off. It is strongly Suggest you speak to you electrician as he will have the appropriate skills to achieve the function of the LED's.
Some of the key features are:
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBL
- Blue LED indicator
- One way/two way switching facility with loop terminal
- Retrofit option in to any 30 series aperture
- Suitable for fluorescent loads Up to 16AX
- Shrouded in-line Terminals provide protection during installation
PDL 60PBL is latching and PDL 60PBBPL is a momentary unit
It means 20A incandesent, 16A fluro
Yes, 30PB is 2 way. The part number for the intermediate mech is 30PBI.
No. We have 10A intermediate switch , 30MI (standard type) & 60PBI(for Saturn)
For more information on intermediate switched please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=30mi
Part number for the mechs is Clipsal 60PBL
Z406*PBL-ZW or Z406*VH-ZW + 60PBL
Yes it can be wired so that the LED is ON when the light is OFF, and OFF when the light is ON
You can try the Clipsal BSL31VH or BBSL31VH with a 30PB mech.
The profile will be not much more than the 1.2mm of the plate.
If you put a contactor or relay in between to protect the switch you could switch more than 20amp
No, The switch plate has the cap eg. 4061VH. The Button mounts onto the switch plate behind the cap.
That comes complete with a 60PBL push button switch (with LED indicator).
Any 60 series mech except for the 60 series rocker switches.
60PBL is the standard Switch with LED to suit that plate.
1x 4064VH-HB - 4 gang grid and plate assembly to suit 60PB Series (Note: The 4064VH is also available in Horizon Silver (HS), Ocean Mist (OM), and Pure White (PW))
4x 60PBL - Saturn Push-button with LED to suit 4060 Series (Note: You could also use the 60PB Saturn Push-button without LED to suit 4060 Series)
The Zen series uses the same push buttons as the Saturn series.
60PB - Push Button
60PBL - LED lit push button
60PBI - Intermediate push button
60PBBP - Bell Press push button
60PBBPL - LED Bell Press push button
For further information on these products please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60PBL
It's a very minimal load of about 0.13 Watts.
For more information on our Saturn range, visit the website at www.clipsal.com/Trade/search-results
and click on the link to view a brochure.