Is there a 15A Surge protected outlet?
To obtain a surge protected 15A outlet you will need to purchase a C2015/15X and a 30SFM and replace the extra switch in the outlet with the 30SFM surge protector mechanism and then wire accordingly.
For some reason we have given the 30CSFM a 10A rating. The mechanism only needs to be rated for the correct voltage and correct fault current the amperage rating is irrelevant as this device does not have the load passing through it, it is there merely for fault conditions.
What is the part code for a sky connection 30 series mech
Part code 30PFM
What is the F type connector plates with dual outlets
Not available as complete. Use 2 x 30PFM and a 2 gang plate
What is the part code for TV mechs 30 series - F type front and back
Use a 30PFM mech
What is the part number for knob to suit a 30CSFM?
The knob part number for a 30CSFM is 2031VF3CB-KB-**.
** - required colour of the knob.
For more information on this product range please visit the Clipsal.com website on the link provided
https://www.clipsal.com/Trade/search-results?q=2031vf3cb-kb
https://www.clipsal.com/Trade/search-results?q=30CSFM
Is the capacitor of 30CSFM sold separately as a spare?
The capacitor is not sold separately.
Do you sell the 30CSFM mech on its own (less capacitor)?
No, however we do sell a 30RSM3 which is a 3 position switch. it looks entierly different how ever it has the same operating characteristics.
What is the replacement knob for a 30CSFM?
The replacement knob for a 30CSFM is the
2031VF3CB-KB.
Some of the key features are:
- Suits multiple series plates
- Multiple colours available
- Marked "off", "1", "2", "3" with a fan logo in the center
- Knob only
For furthur information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VF3CB-KB
Is the 30CSFM fan speed controler solid state?
No, the 30CSFM is not solid state it has a foil type capacitor.
Some of the key features are:
- For ceiling sweep fan
- 75 VA Maximum load
- Speed control technique: Capacitive attenuation
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30CSFM
How many fans can be run from the 30csfm?
| The 30csfm is designed only to run one fan at a time. To run multiple fans (up to 8) we recommend the use of the 32E500FM-we |
|
What is the part number of the three speed fan controller mechanism in 2031VF3CSF?
The part number of the three speed fan controller mechanism in 2031VF3CSF is 30CSFM. The Clipsal 30CSFM Series Three Speed Fan Controller is designed to
provide discreet, linear speed control over small motor loads, including Clipsal’s extensive range of Airflow Ceiling Sweep Fans.
For further information please refer to the below link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30CSFM
Is the Clipsal 30SPK available in black
Only available in white
What is the fan mech only for a PDL 625FM
PDL 600FM
Are there data and telephone mechanisms available in the Saturn range ?
Not directly , to use the Saturn series with Phone / Data mechanisms etc the Saturn communication plates are required. These are compatible with the 30 series data and telephone mechanisms.
For more information on both Saturn and 30 series please visit the Clipsal web site on the links provided
https://www.clipsal.com/Trade/search-results?q=saturn
https://www.clipsal.com/Trade/search-results?q=30%20series
What is the part code for a back plate from the Gael range dimensions 610 x 305mm
The part code is BP24/12
Is the 40CSFM the same as the 40RSM3 without the capacitor?
Yes, the 40CSFM is the same as the 40RSM3 but without the capacitor and pictogram on the front.
Will the 30RSM mechanism fit into a Saturn plate?
No, unfortunately this mechanism does'nt fit the Saturn series. However, this mechanism will fit into the coms Saturn series comunication plate 4031VH.
Can the PDL 600FM (fan speed controller) be used on split phase fans
Yes it can be used on split phase fans
What is the part number for a knob to suit a 30CSFM?
The part number for the knob only is 2031VFCB-KB
What is the part number for knob only for 30CSFM?
Part number for knob only will be 2031VF3CB-KB-WE
What is the part code for a Clipsal Telephone Mech
The part code is 30BTM
What is the part number for a Ftype in the prestige range?
Unfortunately this is not a standard preassembeled part. However, you can use a P30Z (Prestige Bezzel) with a 30PFM (30 F-Type mechanism).
Some of the key features for the P30Z are:
- Mounting accessories
- Switch mechanisms
- Prestige panel
- Suitable for mounting standard Clipsal 30 series mechanisms to the Prestige P2000 collection
- Dimensions: 38 mm Length x 38 mm Width x 18 mm Depth
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=P30Z
Some of the key features for the 30PFM are:
- Pay TV approved outlet rated to 3 GHz
- Mating connections screw into the connector to provide minimum signal loss and optimum impedance matching to substantially reduce reflections and ghosting
- TV antenna socket 75 Ohm
- Suits PAY TV
- IR pass through
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PFM
What parts are required to make a Saturn permanent connection unit (PCU)?
4032VH + 30USM + 38TB
Are the keys available for part number 30TKM?
The keys for part number 30TKM are only available as a special.
We don’t do them as a standard part.
Is the 30BTM Clipsal Telephone Mechanism available in Black ?
No, Not Available in Black
What does the Clipsal BT 2 Wire Telephone Mechanism (30BTM) look like?
please follow the limk
What is the part number for the knob to suit the fan controller 30CSFM?
The part number is as follows: 2031VF3CB-KB-WE
What is part number for Anthracite fan knob to suit 40CSFM?
The part number for Anthracite fan knob to suit is a 40RSM3KB.
Can i get a 40CSFM in any other colour, other than Vivid white?
The 40CSFM only comes in the colour Vivid White. However if another colour is required an additional knob kit can be purchased.
The knob kit comes in a packet with all 4 colour options. The part number is
40RSM3KB.
For further information please visit
www.clipsal.com/Trade/Products/ProductDetail?catno=40RSM3KB
Is the PDL 682 available in a keylock version
Not available, you can use the Clipsal 30TKM this can be fitted in a single VH plate (C2031VH)
What is the data jacks that fits the Saturn 4032VH data plate
You will need to use the 4032VH plates and any Clipsal 30 Series data and AV mechs,
these plates will aslo fit any 30 series switch mech,
EG 30TV75M, 30PFM, 30HDMIA, VDIB17756U-we
What is the part number for a mounting block that can be mounted on a circular 300mm pole?
The part number for a mounting block that can be mounted on a circular 300mm pole is - 2000MF300
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=2000MF300
What is the phone and permanent connection mechs for the Clipsal Slimline plates
Slimline fits all 30 Series mechs. Permanent connection unit is the 38TB, phone mech is 30BTM
Which mechs fit the Clipsal BSL Range ?
Any 30 series Clipsal mech will fit. 30BTM is the telephone mech, available in white only. 30FFPFMS is the TV mech.
What data and telephone jacks do we have to suit Saturn series
You can use 4030VH plates and the 30 series mechs i.e. VDIB17735U, VDIB17756U, VDIB17736U & 30BTM
Is there a "Draftstoppa" to suit the 6500A?
No. Our Draftstoppa only suits round exhaust fans up to 300mm diameter.
To what speed does 0, 1, 2, 3 marking correspond to on 30CSFM, 4060CSFM and Z4060CSFM three speed fan controllers?
What is the part code for a Clipsal metal range 12 Gang Switch Assembly (Less Mechanisms) - Stainless Steel?
B12/30/6 = 12-Gang Switch Plate. 2 rows of 6. Stainless steel. 303mm 120mm
12/30/162/3 = 12-Gang Switch Plate. 4 rows of 3. Stainless steel. 165mm 215mm
Includes stainless steel fascia with grid and wall box. Standard grid colours - White Electric (WE) and Black (BK).