plate only 1g arch switch

Switch Plates -Architrave Size, 1 Gang

Catalogue Number: 31
plate only 1g arch switch
Colour White Electric (WE)
  • White Electric 1 PCE 1

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Number of gangs
1 gang
Product destination
switch
Fixing mode
by screws
Material
plastic
Marking
without marking
Mounting position
horizontal and vertical
Fixing center
55 mm
Width
32 mm
Height
72 mm
Depth
11 mm
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Weight
15 g
Package 1 Height
10 mm
Package 1 width
82 mm
Package 1 Length
118 mm

Frequently Asked Questions

hide show

What are the dimensions of the detachable Keypad (VW3A31101)of the Altivar 31 Drive.

Refer the attachment for the dimensions of the detachable Keypad (VW3A31101) of the Altivar 31 Drive.

 

How to connect external potentiometer in Altivar 31 drive.

You have to program the parameter Frequency Reference 1(Fr1) = AI1 in Control menu (CtL) for potentiometer.

Refer to the attached file for potentiometer connection details in an Altivar 31 drive.

What do I do if I am getting flickering or load distortion

Confirm you are using compatible load type and then there is an option to fit a 31 Cap.  Please refer to Installation Instructions.

What is the cable pinout to connect an M340 to an Altivar 31 drive via CANopen?

The CANopen cable pinout to connect a M340 to a Altivar 31 drive is:


Legacy KB System (APS) Data: RESL190316 V1.0, Originally authored by MiMe on 12/11/2007, Last Edited by MiMe on 12/11/2007
Related ranges: Modicon M340

Where can I find the manual for Altivar 31 drives?

Issue:
Needs the manual for Altivar 31 drives

Product Line:
Altivar 31, ATV31

Environment:
All

Cause:
N/A

Resolution:
Please see attachment below for a copy of the manual.

What is the Bus Cycle Time for the Twido AS-Interface module?

This is the cycle time between slave(s) and the master module. The AS-Interface system always transmits information, which is the same length to each slave on the
bus. The AS-Interface cycle time depends on the number of active slaves connected to the bus. The scan time t represents the exchange time between a
master and n active slaves (a maximum of 31 on /A or /B).So, for:
  • up to 19 active slaves, t = 3ms
  • 20 to 31 active slaves, t = (1+n) * 0.156ms

When two slaves A and B have the same address, each slave in the pair is scanned every two cycles. This means that for 31 extended address setting slaves
configured in /A, + 31 extended address setting slaves configured in /B. the scan time will be 10 ms.
Maximum cycle time:
  • maximum 5 ms for 31 standard or extended address setting slaves,
  • maximum 10 ms for 62 extended address setting slaves.
Show More