White Electric | Time Delay Switch 250V 10A - weatherproof / hoseproof

Primarily designed for up to 10 minutes with care 20 minutes may be possible.

FYI We now have a range of new timers and time clocks modules which can be installed into any iconic plate or a installed and triggered by any momentary switch they can be installed placed inside the flush box

The Data/TV/Audio jacks have been designed to only fit in the switch plates as those mechs should not be mounted in the same plate as AC mains voltage connections.

The 31CAP is a load correction device which consists of a "Capacitor only" to help 2 wire products achieve minimum load levels. The 31LCDA has circuitry built in to the device to enable it to correct minor compatibility issues found between dimmers and LED lights for example slight flickering when dimmed at a higher level.



31CAP - Increases minimum load.


For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31CAP



31LCDA - Assists with compatibility issues.



For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31LCDA

The 31CAP is to be use with the following two wire products
Infrascan 750WP, 751, 753.
Timer 31VETR
Sunset Switch WS226SSR/2, 56SSR/2, 31VSSR/2

The S31LCDA is suitable for use with Clipsal & Schneider Electric 2-Wire, mains powered Dimmers that use
Leading Edge, Trailing Edge and Universal Dimming.
Other Suitable loads: Dimmable CFL/ Dimmable LED with Electronic control

(Load correction Devices may not correct all problems)
Installation Instructions can be found on the Clipsal.com Website.