socket surface 3pin 15a 250v


Catalogue Number: 413/15
socket surface 3pin 15a 250v
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE 1


hide show
Product brand
Quantity per set
set of 1
Cover type
complete housing
without marking
Local signalling
without light indicator
Device mounting
Fixing mode
by screws
[In] rated current
15 A
[Ue] rated operational voltage
250 V AC
Network frequency
50 Hz
46 mm
66 mm
Fixing center
50 mm
Number of poles
  • AS/NZS 3112
  • AS 3100
  • AS 3109
  • AS/NZS 3122:approval number S/1
    • REACh Regulation
      Reference contains Substances of Very High Concern above the threshold
      EU RoHS Directive
      Mercury free
      RoHS exemption information
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Circularity Profile

      Documents & downloads

      hide show
      Filter items
      • All

      • CAD Files and Packs

      • Installation Instruction

      • Product Environmental

      • Specifications

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      Does the 413/15 come with a back plate?

      No it doesn't come with a back plate. You will need a 413NP.

      Some of the key features are:
      • For the use of cable ties for cable clamping
      • Not suitable for 414/4P
      • For 410, 413 and 414 products
      • AS3100, AS/NZS3112, AS3109 Certified
      For further information please visit

      Are the 593/15 and 593/20 the same size?

      No, the 593/15 is 118 x 25 x 15mm and the
      593/20 is 130 x 27 x 16.5mm.

      For further information please visit

      What is the part code for a caravan lead with RCD 15m permanent connection

       The part code is PDL 953/15

      Is there a PDL 953/15 that is longer than 15m

       No not available 
      Please note this product is being phased out

      What is the part no for the plug to suit 413/4P ?

      Part no for the plug is 1439/4P

      User-added image


      What plug goes with the 413/4P plug base?

      The plug that goes with the 413/4P plug base is the 1439/4P.

      Some of the key features are:
      • 47 mm Diameter x 74 mm Depth
      • Suitable for up to 1 sq mm Heavy duty or 1.5 sq mm ordinary duty four core flexible cords
      • Polycarbonate construction

      For further information please visit


      Does Clipsal have a Link Bar with at 13 tunnels and 1 x 50mm and 3 x 16mm tunnels?

      Yes the L13/150 will suit those requirements.

      What is the part code for the replacement rubber seal for PDL 14/15 Tuff light

      The part code is PDL20/8

      How to get pricing on Masterpact NT/NW hardware?

      If Customer wants pricing on Masterpact NT or NW for example NT16H1
      They need to fill out for attached or on 2.2.52 13/14 Catalogue and send to :

      What are the emergency test kit buttons types or part numbers?

      pbelkit 2


      There are 4 options  see page 2.1.28 of schneider 13/14 catalog

      Where are the 1 N/O and 1 N/C auxiliary contacts located on the LC1D Contactors?

      They are on the front of the contactor with the coil connections, terminal 13/14 for NO and 21/22 for NC


      what is selector switch body for zb4bw7l3741?

      Can offer the ZB4BZ103 (2 N/O contacts)...and add the light from page 3.4.9 of the 13/14 for appropriate voltage.
      Data sheet........

      Is there a skirting mount double power outlet rated to 15A, 250V?

      Unfortunately not, we do not have skirting mount double power outlet rated to 250V 15A .

      In 15A , 250V, skirting mount, we have the following options:

      16/15 -  Single Power Outlet 250V 15A, Skirting Mount, Plate size 98 x 41mm at centre.
      For further information, please visit

      16/2MF1510 - Double Power Outlet 250V 15A and 10A combination, Skirting Mount, suits ducting (156.5 x 44mm).
      For further information, please visit


      How to perform MSET on a BPH motor using Lexium 17/15 Servo Drive?

      Issue:  Although the BPH motors that are used with the Lexium 17 and 15 range of Servo drives are factory MSET, occasionally there may be a need to MSET this in the field due to commutation error being reported. 

      Product Line: Lexium BPH


      Cause: Due to an incorrect offset value set in the drive, the drive may report a F25, commutation error.

      Resolution: This resolution discusses the MSET procedure for a BPH motor with a Lexium 17/15 series drive.

      Proper commutation and position feedback are required to interface a particular servo drive and motor combination. When using Schneider Electric BPH motors and Lexium drives, this setup (or “characterization”) process has been completed and verified for the user at the factory. Occasionally there may be a need to MSET the BPH motor and this is detailed in this procedure.
      Perform the following steps, as described, and in the order presented, to complete the MSET procedure. 
      1.    Disconnect the Motor from the Mechanical Load
      2.    Electrical Connections
      A.   Verify that the required electrical connections for drive power, logic power, motor power and resolver are as described in the Lexium drive user manual.
      B.   Apply 24VDC logic and AC input power to confirm proper drive startup sequence and self-checks.
       Follow this MSET procedure only if the drive firmware is ver 5.51 and above.
       Connect to the drive using Hyperterm…
      1. Type OPMODE followed by Enter – note down the Opmode (xx) the drive is set to.
      1. Type OPMODE 2 followed by Enter – switch to digital torque mode
           C.     Type 'EN' followed by Enter.

           D.     Type "Zero" followed by ENTER - Motor shaft will jump to nearest pole. MPHASE value is automatically set.
      1. Type SAVE
      1. Type OPMODE xx followed by enter ( where xx is the default value that was originally set for the application.)
           G.    Type COLDSTART (the drive will reboot)
      This completes the MSET procedure.