Image of 750WP Infrascan Sensor IP66 2 Wire
infrascan outdoor 2wire 5a
Image of 750WP Infrascan Sensor IP66 2 Wire
infrascan outdoor 2wire 5a

Motion Sensor Infrascan - Passive infrared - Outdoor - 18m detection range - 2-Wire - 240 V - 5 A - Grey

Catalogue Number: 750WP
Image of 750WP Infrascan Sensor IP66 2 Wire
infrascan outdoor 2wire 5a
Image of 750WP Infrascan Sensor IP66 2 Wire
infrascan outdoor 2wire 5a
Colour: Grey
Colour: Per UOM Std.
  • Grey 1 PCE 1

Specifications

hide show
Range of product
Infrascan
Range
Infrascan
Product brand
Clipsal
Product or component type
movement sensor
[Ue] rated operational voltage
200...265 V AC
Network frequency
50 Hz
Power range
<= 40 W
Mounting support
  • wall
  • ceiling
    • Mounting height
      2.4 m
      IP degree of protection
      IP66
      Ambient air temperature for operation
      0-50 °C
      REACh Regulation
      Reference contains Substances of Very High Concern above the threshold
      EU RoHS Directive
      Compliant
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Circularity Profile
      ENVEOLI121002EN

      Frequently Asked Questions

      hide show

      Which outdoor sensors have a sensitivity adjustment

      The  part codes are  100SA360, 750WP and 750WPR

      Can 750WP be connected in parallel to control the same load .

      No. Need to use the 750WPR, three wire device when connecting in parallel
      For more information on the 750 series please visit the Clipsal web site on the link provided . https://www.clipsal.com/Trade/search-results?q=750w

      How do I know if 750WPR Infrascans I have installed are affected by the batch related component issue?

      If movement is still being detected (shown by the flashing RED LED indicator behind the sensor lens), however the load does not switch on, then the unit is affected. If this is the case please contact the Clipsal warranty department using the link to have the unit replaced free of charge.
      Link: https://www.clipsal.com/warranty
       

      Does the 96VH110/2 have a sensitivity adjustment

      No it does not only the 100SA360, 750WP and 750WPR do

      My 750WPR Infrascan sensor has stopped switching the light on, but the red LED in the sensor is still flashing. What do I do?

      If the 750WPR Infrascan sensor was installed within the last five years it is covered under warranty. Please contact the Clipsal warranty department using the link to have the unit replaced free of charge.

      Alternatively contact your local electrician.

      For Clipsal warranty please visit https://www.clipsal.com/warranty
       

      What is the part number for the load correction device for the 750WP?

      The part number for the load correction device for the 750WP is - 31CAP

       
      Show More