Smoke Alarm Photo Flush

The part number for an isolation unit to wire , alarm , extra warning lights to the 755PFM is - 756

Please go to the following links below and check under the Documentation Tab for more information.

Australia - https://www.clipsal.com/products/detail?CatNo=756&itemno=756&backto=/search?q=756&tab-document-1=0
New Zealand - https://www.pdl.co.nz/products/detail?CatNo=756&itemno=756&backto=/search?q=756

The 755 series smoke alarms have a 5 year warranty period
 

Yes, they are interconnectible with each other.

It is 90mm.




The installation sheet for 755PFM is available at:  https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0000801.pdf

The dust inside the smoke alarms can cause a continuous beep.
Please follow the regular maintenance check to avoid this.

Vacuum the smoke alarms using a soft brush attachment-
Keeping your smoke alarm free of dust particles, dirt, kitchen grease or cobwebs will help you reduce false alarms and ensure any smoke can easily reach the internal sensing chamber.

Clean and wipe down around unit-
Clean around the smoke alarm unit and remove any insects or other contamination which may have occurred. Spray bug repellent on a cloth and wipe the ceiling around the smoke alarm to act as a future bug deterrent. Clean every 3-6 months to mitigate insect ingress.

ALWAYS TEST THE SMOKE ALARM AFTER CLEANING.

Attached is the Clipsal smoke alarm troubleshooting guide for more info.


 

No, the 755PFM4 is a flush mount smoke alarm that can not be fitted with a remote Test/Hush button.
To achieve the remote Test/Hush function you will need a surface mount alarm such as the 755LPSMA4 or 755RLPSMA4 in conjunction with the 755RB relay base.