240V Smoke Alarm Photo Surface

240V Smoke Alarm Photo Surface

240V Smoke Alarm Photo Surface

Item Number: 755PSMA2

Datasheet

Specifications

Design

Product brand

Clipsal

Physical

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Others

Package 1 Weight

335 g

Package 1 Height

54 mm

Package 1 width

150 mm

Package 1 Length

150 mm
Show all specifications

Frequently Asked Questions

hide show

Is the PDL SD100 Smoke alarm base interchangeable with the 755PSMA4 smoke alarm?

Yes, the the 755PSMA4 will fit on the PDL SD100, 755PSMA, 755PSMA2 bases.

For further information please visit https://www.clipsal.com/products/smoke-alarms

What size relay is in the 755RB?

The 755RB has a 2A relay.

Some of the key features are:
  • Integral 2A Isolated voltage free changeover relay
  • Control/activate third party devices (i.e. lighting, security, or home automation systems)
  • Dry contact input for remote test/hush functions from a momentary switch
  • Suitable for use with 755PSMA2 and 755RLPSMA2 smoke alarms

 

What causes the smoke alarm to continuously beep ?

The dust inside the smoke alarms can cause a continuous beep.
Please follow the regular maintenance check to avoid this.

Vacuum the smoke alarms using a soft brush attachment-
Keeping your smoke alarm free of dust particles, dirt, kitchen grease or cobwebs will help you reduce false alarms and ensure any smoke can easily reach the internal sensing chamber.

Clean and wipe down around unit-
Clean around the smoke alarm unit and remove any insects or other contamination which may have occurred. Spray bug repellent on a cloth and wipe the ceiling around the smoke alarm to act as a future bug deterrent. Clean every 3-6 months to mitigate insect ingress.

ALWAYS TEST THE SMOKE ALARM AFTER CLEANING.

Attached is the Clipsal smoke alarm troubleshooting guide for more info.

Clipsal Smoke Alarms.png
 

Can the new smoke alarms fit onto the 755SMA, 755PSMA, SD100 or SD200 mounting base?

Yes, the new Gen 2 smoke alarms are 100% backwards compatible. They can clip straight onto the existing mounting bases. The new smoke alarms are also compatible with wired interconnection of all alarms mentioned above as well as the existing 756 isolated relay module. 

Is there a device that turns my lights on when my smoke alarm goes on?

Yes, if you have a 755PSMA2, you can use the 755RB Base which has a set of built in contacts or you can use a 756 Isolation unit which also carries out the same task.


 

Is the 755PSMA4 inter connectable with the old PDL SD100 Smoke alarm?

Yes, the PSMA4 range is backward compatible with the PSMA2 and SD100 range of smoke alarms.

For further information please visit www.pdl.co.nz
Show More