iDPN N Arc 1P-N 6A...25A C 6000A Arc fault detection circuit breaker

Arc Fault Detection Circuit Breaker iDPN N Arc, 1P+N 10A C 6000A

Catalogue Number: A9FDB610


hide show
Package 1 Height
0.86 dm
Package 1 Length
1 dm
Package 1 width
0.4 dm
Circuit breaker application
Range of product
Acti 9
Acti 9
Product name
Acti 9 iDPN N Arc
Product or component type
arc fault detection circuit breaker
Product specific application
fire prevention by arc detection
  • IEC 60898-1
  • EN/IEC 62606
    • Device short name
      iDPN N Arc
      Poles description
      1P + N
      [In] rated current
      10 A at 30 °C
      Curve code
      Breaking capacity
      6000 A Icn at 230 V AC 50 Hz conforming to EN/IEC 60898
      Network type
      Neutral position
      Trip unit technology
      Number of protected poles
      Network frequency
      50 Hz
      [Ue] rated operational voltage
    • 230 V AC 50 Hz conforming to IEC 62606
    • 230 V AC 50 Hz conforming to EN/IEC 60898-1
      • Device location in system
        Magnetic tripping limit
        5...10 x In
        Limitation class
        3 conforming to IEC 60898-1
        Threshold tripping voltage
        400 V 200 ms
        [Uimp] rated impulse withstand voltage
        4 kV conforming to IEC 60898-1
        [Ui] rated insulation voltage
        400 V AC
        Contact position indicator
        Control type
        Local signalling
        ON, OFF, fault trip
        Mounting mode
        Mounting support
        DIN rail
        Mechanical durability
        20000 cycles
        Electrical durability
        20000 cycles 230 V AC 50 Hz conforming to EN 60898
        Overvoltage category
        Cable entry
        Connections - terminals
      • tunnel type terminal for 1 cable(s) 10-10 mm² flexible
      • tunnel type terminal for 2 cable(s) 2.5-2.5 mm² flexible
      • tunnel type terminal for 1 cable(s) 16-16 mm² rigid
      • tunnel type terminal for 2 cable(s) 2.5-2.5 mm² rigid
        • Wire stripping length
          14 mm
          Tightening torque
          2-2 N.m
          Comb busbar and distribution block compatibility
        • ProDis
        • Librio
          • Connection pitch
            9 mm pitches
            81 mm
            36 mm
            72 mm
            Net weight
            190 g
            Heat dissipation
            2.6-2.6 W at 230 V - 10 A
            IP degree of protection
            Pollution degree
            severity B conforming to IEC 60068-2-30 for 28 d
            Operating altitude
            2000 m
            Ambient air temperature for operation
            -25-60 °C
            Ambient air temperature for storage
            -40-85 °C
            Product certifications
            Package 1 Weight
            0.128 kg
            Sustainable offer status
            Green Premium product
            REACh Regulation
            Free of Substances of Very High Concern above the threshold
            EU RoHS Directive
            Mercury free
            RoHS exemption information
            China RoHS Regulation
            Product out of China RoHS scope. Substance declaration for your information
            Environmental Disclosure
            Circularity Profile
            The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

            Documents & downloads

            hide show

            Frequently Asked Questions

            hide show

            What are the codes for the Fault Arc Detection Devices?

            The part numbers for the Fault Arc Detection Devices are as follows.
            6A - A9FDB606
            10A - A9FDB610
            16A - A9FDB616
            20A - A9FDB620
            25A - A9FDB625

            What is the code for 10A 2P D Curve MCB - rated at 10kA ?

            Code = A9F45210   C60 MCB 

            Can the A9F44210 be used with 110v AC?

            Yes it can, the only difference between a 100v and 230v is that you will get 36kA breaking capacity as opposed to 20kA (230v).


            What is the part number for a 3 phase 10amp D-Curve RCBO?

            The part number for a 3 phase 10amp D-Curve RCBO is - A9F55310 & A9V02763

            For further information , visit link below:-

            Do you have a C60H Circuit breaker single phase 10A?

            In the Schneider range we have the Acti 9 IC60H circuit breakers. The part number for a single phase, 10A is a A9F54110.


            What is the difference between A9D32620 and A9D33620 RCBO Acti 9 devices?


            A9D33620 = SI (Super Immunised)
            A9D32620 = Type A (AC or pulsating DC)

            Type A RCBO = Tripping is ensured for residual sinusoidal alternating currents and residual pulsating direct currents, whether suddenly applied or slowly rising.
            Type Si RCBO = With all the features of a Type A device, “Si” type Super Immunised earth leakage protection range has been specially developed to be used with loads or in environments causing disturbances. Examples are lightning or switching surges, harmonics generated by increasing number of loads and constant load leakage current from electronic ballasts, speed drives, computers, etc. The Si increases safety and allows improved continuity of supply.
            Show More