They are available in 3 different sizes:
16mmx6 - 32 UNC = PDL201
30mmx6 - 32 UNC = PDL202 (standard size)
50mmx6 - 32 UNC = PDL204
No, that is completely discontinued.
The PDL204 is the longest Screw Length we have and that is 50mm.
A longer screw would need to be sourced through a third party. the Thread type is 6/32 UNC
Can use a PDL770 <(>&<)> PDL772
You can use PDL571R or PDL573R
There are 3 different sizes of fixing screws. The code for these are:
16mmx6-32UNC - PDL201
30mmx6-32UNC - PDL202
50mmx6-32UNC - PDL204
They all come as a pack of 100.
The 620K is leading edge.
No spare parts available, need to order complete unit
Yes the Part code is PDL642MUSBBK
Yes, we do have metal cover plates for the PDL600 series switches. The part number for a single gang cover is 681M.
The x means there is no rating for water protection
We do not sell solid links for the PDL720
Please see attached instruction sheet - complete with cleaning instructions.
Yes each socket is rated for 10A.
Heaters installed before July 2006, the product is not affected by this recall.
Attached is the Recall Notice information regarding the PDL3208 Thermosafe bathroom heater.
No, an SDoc is not required for these items.
894USB and 842M USB Chargers USB Charger Module 1.2 amp 6 watts , Modular USB charger
The Clipsal 7006A
(available in white only) is the suggested alternative.
700 series Fuse Carriers, eg PDL751 are no longer available with no alternative.
Yes, This down light is classified as an IC-F recessed luminaire that can be abutted against
normally flammable materials, including building insulation, and can be covered in
This type of recessed luminaire is effectively a sealed unit that has restricted flow of air between the habitable room and the luminaire.
No unfortunately we only make the 20A mechanisms now.
It is a date code eg. 3712 is Week 37 of year 2012
PDL842MUSB - white or black
PDL894MUSB - only in white
We do not have a direct replacement for that dimmer option.
No the ZB5 range is what should be used
The mounting Block to suit is the PDL567S
Saturn module = 4061E2PUDM-TR
Clipsal 30 series module = 31E2PUDM-WE
PDL600 module = PDL654PBMWH
PDL800 module = PDL854PBMWH
Note:- Being universal dimmers they may not be suitable for LED's as most LED drivers require a trailing edge dimmer.
A push button dimmer can not be used in a 2 way circuit as it requires a physical press to turn on.
If two way push button dimming is required this can be done via Saturn Onetouch, Iconic push button dimming and Nero Environexus
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
The clip for these is a PDL727, although the 700 series fuse carriers are now discontinued.
No, unfortunately there isn't an adapter so you can fit 30 series mechanisms into a PDL 600 series plate.
The Part code is PDL692USBWH
Yes, the 223H can fit the PDL 600 series plates.
The part code is:
The part code is
As the 620K is a leading edge dimmer it is not suitable for electronic transformers.
The transformer should be changed for a wire wound or the dimmer should be replaced with trailing edge, though as we only do 450w rated dimmers the load would have to be split between two dimmers.
The PDL620K is no longer available.