They are available in 3 different sizes:
16mmx6 - 32 UNC = PDL201
30mmx6 - 32 UNC = PDL202 (standard size)
50mmx6 - 32 UNC = PDL204
The PDL204 is the longest Screw Length we have and that is 50mm.
A longer screw would need to be sourced through a third party. the Thread type is 6/32 UNC
The minimum load is 20W 0.1A
The maximum load is 450W 1.8A
There are 3 different sizes of fixing screws. The code for these are:
16mmx6-32UNC - PDL201
30mmx6-32UNC - PDL202
50mmx6-32UNC - PDL204
They all come as a pack of 100.
The 620K is leading edge.
No spare parts available, need to order complete unit
No, it is no longer available that is a discontinued colour.
The Base is Nylon and the cover is ABS.
Yes, we do have metal cover plates for the PDL600 series switches. The part number for a single gang cover is 681M.
We do not sell solid links for the PDL720
Please see attached instruction sheet - complete with cleaning instructions.
No, there is no round earth pin equivalent of the PDL644.
Heaters installed before July 2006, the product is not affected by this recall.
Attached is the Recall Notice information regarding the PDL3208 Thermosafe bathroom heater.
We do not have a cable size only the diameter of the hole which is 7.8mm
This range has now been obsoleted
This item is now obsolete - spare parts no longer available.
Height = 41.8 mm
Width = 48.2 mm
Cutout of 38x32
700 series Fuse Carriers, eg PDL751 are no longer available with no alternative.
No unfortunately we only make the 20A mechanisms now.
PDL842MUSB - white or black
PDL894MUSB - only in white
No, it is only available in white - PDL644CWH
No. Only available in white or black.
No, the PDL644 is only available in white and black.
We do not have a direct replacement for that dimmer option.
No the ZB5 range is what should be used
The mounting Block to suit is the PDL567S
Saturn module = 4061E2PUDM-TR
Clipsal 30 series module = 31E2PUDM-WE
PDL600 module = PDL654PBMWH
PDL800 module = PDL854PBMWH
Note:- Being universal dimmers they may not be suitable for LED's as most LED drivers require a trailing edge dimmer.
A push button dimmer can not be used in a 2 way circuit as it requires a physical press to turn on.
If two way push button dimming is required this can be done via Saturn Onetouch, Iconic push button dimming and Nero Environexus
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
The clip for these is a PDL727, although the 700 series fuse carriers are now discontinued.
No, unfortunately there isn't an adapter so you can fit 30 series mechanisms into a PDL 600 series plate.
Yes - PDL644C (4 way switched socket 10A)
Available in White only
Opal PDL94OP & Clear PDL94CL
The Part code is PDL692USBWH
Yes, the 223H can fit the PDL 600 series plates.
The part code is:
The part code is
As the 620K is a leading edge dimmer it is not suitable for electronic transformers.
The transformer should be changed for a wire wound or the dimmer should be replaced with trailing edge, though as we only do 450w rated dimmers the load would have to be split between two dimmers.
The PDL620K is no longer available.