PDL Iconic, Movement Detector, PIR, 240 V, Translucent

Translucent | PDL Iconic, Movement Detector, PIR, 240 V, Translucent

PDL Iconic, Movement Detector, PIR, 240 V, Translucent

Item Number: PDL352MPIR-TN




Sustainable offer status

Green Premium product


PDL Iconic

Product brand


Product or component type

movement detector

Device application

  • lighting
  • power circuit application


Provided equipment

  • carrier (plastic)
  • finishing accessory

[Ue] rated operational voltage

220/240 V AC 50 Hz 25 °C

Power consumption in W

1 W at 240 V AC

Maximum load current

3 A for per output

Rated power in W

  • 100 W LED lighting
  • 750 W incandescent
  • 100 W fluorescent
  • 400 W LV halogen
  • 100 W motor

Protection type

input surge protection for sensor

Electrical insulation class

double insulation

Type of setting

time adjustment: 20...900 s

Light intensity adjustment

10...2000 lux

Movement detection area

5 m

Detection angle

  • 100° horizontal
  • 82° vertical

Device mounting

wall mounted

Mounting height

1.2 m

Type of installation

indoor installation

IP degree of protection

IP20 (modular enclosure) conforming to IEC 60529

Ambient air temperature for operation

-10...50 °C

Ambient air temperature for storage

-20...60 °C

Relative humidity

5...90 % non-condensing


AS/NZS 60669.2.1

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive


Mercury free


RoHS exemption information


China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure


Circularity Profile


Function of module

motion detection

Sensor type






Unit Type of Package 1


Number of Units in Package 1


Package 1 Weight

100.0 g

Package 1 Height

9.9 cm

Package 1 width

6.6 cm

Package 1 Length

8.4 cm
Show all specifications

Frequently Asked Questions

hide show

Is there a PIR motion sensor mechanism in the Iconic Range?

Yes there is a new sensor mech 
NZ PDL cat number is PDL352MPIR-TN  
AU Clipsal cat number is 41EPIRM-TN

The Iconic PIR (Passive Infrared) Sensor Module is suitable for automatic switching (Power Saving) or security
applications in domestic and commercial premises.
The Sensor has a 100° horizontal and 82° vertical field of view with a 5-metre range. Switching capacity is 750W
incandescent, 100W fluorescent, 150W LED and 100W motor ratings.
The sensor controlled light is switched ON when infrared radiation from a moving target is detected and OFF again
when movement stops and the pre-set time delay is reached. Time delay is adjusted between 10 seconds and 15
minutes. The Sensor has a lux (light level) adjustment.
The PIR is fitted with a red LED indicating that the device is sensing the target.


Does the PDL342MPIR have a minimum load requirement?

No the PDL342MPIR does not have a minimum load requirement.

Please refer to datasheet for maximum load ratings: