Frequently Asked Questions
hide
show
Will the PDL100MPIR sensor mechanism fit into PDLZ681WH, PDLZ682WH, PDLZ683WH etc.?
Yes, it will fit as it is a standard size PDL mechanism.
Can I install a PDL100MPIR at the top and one at the bottom of a staircase
Yes you can
L1 VME - What is the maximum time range of the PDL100MPIR sensor ?
15 minutes
Installation Sheet attached
What is the Clipsal equivalent of PDL 100MPIR
There is no Clipsal equivalent to the PDL100MPIR in 30 series
However Iconic now has a PIR mech / Module
Will the PDL100MPIR switch LED lighting?
No, Suggest using the 600RM intermediate relay.
https://www.pdl.co.nz/product-details.aspx?rcat=products&catid=0&id=1865
What is the Voltage Range for the PDL100MPIR?
230-250V AC at 50Hz
What plate is required to fit the on/off and auto/manual switches with a 100MPIR?
The installation sheet for the 100MPIR is at
https://www.pdlglobal.com/data/product_documents/100MPIR%20Install%20sheet.pdf
Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.
With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.
There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:
https://www.pdl.co.nz/product-details.aspx?rcat=products&catid=0&id=903
Is the 692C available in black?
No - PDL692CWH only
or the metal plate options:
PDL692MSS - Stainless Steel
PDL692MBBZ - Brushed Bronze
PDL692MPB - Polished Brass