No, the through connect modules only come as "TV" (615MFTV), "SKY" (615MFSKY) or blank (615MF).
The 628MF does come printed with "IN" (628MFIN) but that is Coaxial on front with F-type at the back.
No. Unfortunately, there is no cover available for PDL695T.
Yes, the part number is PDL610ML24RD.
White and black only.
No the PDL619MM is only suitable for use with communications mechs (TV, Data, USB) as the mech will be recessed so it is not suitable for switches, dimmers, fan speed controllers.
The PDL 615HDMI is only available in white.
The part number is PDL615MKC
Yes, All of the PDL640MF RCA sockets are RCA connection on front with F-Type connection on the back.
You will need a PDL 800MA adaptor + PDL 617M2 telephone mech or a data mech PDL619MD
Yes you can remove the 815USB1 from its 800 series clip and install it into a PDL615MKC adaptor
The part code is:
The part name is as follows: PDL600ME
No, the PDL628MFO is only available in white.
Don't need to use an isolator
No, that product is only available in white.
The variable fan speed control code is PDL625F or PDL625FM (Module) the rating of this fan control is 500VA
Part number PDLZ685WH is the same as PDL685WH
it has a different prefix.
May be suitable but not spec'd. Rather use a 625F which has a minimum load of 40W
No. All of the HDMI mechs are only available in white.
Max load is 100VA as per data sheet
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
No - item has been discontinued
PART NO FOR COVER PDL695C
No the PDL 695R is only available in white - PDL695RWH
No it isn't. No testing has been carried out.
Socket single: PDL1561
Socket double: PDL1562
Flush box single: E157
Flush box double: PDL1548
This device does not provide downstream (or upstream) protection to
other sockets on the same circuit.
This is specifically for over current and over terperature protection for the sockets on the plate.
Note:This is not an RCD.
(see attached Data sheet)
The part number is PDL695XCWH
No, White and metal covers only.
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
The PDL535F is curved towards the floor to reduce its profile. The height from the floor is 10mm at highest point.
Yes, In the opinion of Marshall Day Acoustics (NZ Ltd) this flushbox will not degrade the acoustic ratings of all common types of steel and timber framing with STC ratings up to 60.
It depends on the type of TV connection you require.
For PAL connection you will need to get PDL800MA(adaptor) and PDL628M mech
For Pay TV(F-Type) connection you can use the PDL815MF2
For HDMI connection you can use the PDL815HDMI
The part number for a PDL surface socket outlet , plug base is - PDL51MB
Yes, You can use the PDL695X and install a PDL694MUSB in place of the extra switch.
These are no longer available. The only spare parts that are still available for the PDL535F are the flap springs. (Refer specials)
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
Yes, A 642MUSB will fit in the position of the extra switch in a 695X
Or that can be purchased as a complete plate using the part code PDL695USB