The part number is PDL615MKC
Yes you can remove the 815USB1 from its 800 series clip and install it into a PDL615MKC adaptor
The Part Number will be either
PDL815MKC1 Which fits 1x VDIB17766UWE
PDL815MKC2 Which fits 2x VDIB17766UWE
Any Keystone shaped mechs (Data Jacks)
No, But it can be made by removing the Keystone USB jack from the PDL815USB1WH and installing that into the PDL615MKCWH adapter.
White and black only.
No, the through connect modules only come as "TV" (615MFTV), "SKY" (615MFSKY) or blank (615MF).
The 628MF does come printed with "IN" (628MFIN) but that is Coaxial on front with F-type at the back.
Yes, the part number is PDL610ML24RD.
You can use a 800 series mech, pop out the mech and add it to a PDL615MKC
it is a Warm White lamp so it may appear to have a yellowish light emitted through the clear lens.
No the PDL619MM is only suitable for use with communications mechs (TV, Data, USB) as the mech will be recessed so it is not suitable for switches, dimmers, fan speed controllers.
The PDL 615HDMI is only available in white.
You will need a PDL 800MA adaptor + PDL 617M2 telephone mech or a data mech PDL619MD
The part code is:
No - PDL692CWH only
or the metal plate options:
PDL692MSS - Stainless Steel
PDL692MBBZ - Brushed Bronze
PDL692MPB - Polished Brass
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
PDLO695MSS = Stainless Steel
PDLO695MBBZ = Brushed Bronze
PDLO695MPB = Polished Brass
PDLO695CWH = White
No, PDL695USBWH - White only.
It can be made out of parts - PDL695XBK + PDL642MUSBBK
The PDL691MSS is anodised aluminum, as are the MPB and MBBZ versions
No, these are not available in black.
The closest option is to buy a PDL815MKC2BK or PDL815MKC1BL and swap out the white modules from the PDL815USB2WH or PDL815USB1WH.
Note: these are not charger modules but straight through USB female - female.
PART NO FOR COVER PDL695C
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
No, the PDL628MFO is only available in white.
Alternative is ML2025I-WE
or the PDL695Pwh
No - covers are only available in metal
We do have plugs to suit but you can try Dick Smith or similar place
There was a 20A version available for about 6months about 5 years ago (about 2008)
Yes - single pole, two way.
No the PDL 695R is only available in white - PDL695RWH
PDL695XMSS (and other metal plates)
The part number is PDL695CWH
The part code is
PDL686MBBZ (covers the outside)
No, only available in White
Yes, the code is PDL654MBK
The part number is PDL654MBK
Only availble in a single vertical version, part number PDL 691RCD30WH
No, that product is only available in white.
The Cover is only available in MSS, MPB & MBBZ
No. Only in white. The PDL695/15 is available in black.
No, the PDL695/15 is only available in white.
No, this is only designed and tested for switching 230VAC
PDL625C3M (2uF and 3uF)
PDL625C3/1M (1uF and 2uF)
See attached Data sheet
The 12 and 24V illuminated modules in the PDL610 range are now LEDs, the 250V option remains a Neon