The part number is PDL615MKC
No the PDL619MM is only suitable for use with communications mechs (TV, Data, USB) as the mech will be recessed so it is not suitable for switches, dimmers, fan speed controllers.
Yes you can remove the 815USB1 from its 800 series clip and install it into a PDL615MKC adaptor
You will need a PDL 800MA adaptor + PDL 617M2 telephone mech or a data mech PDL619MD
The part code is:
White and black only.
Yes, the part number is PDL610ML24RD.
it is a Warm White lamp so it may appear to have a yellowish light emitted through the clear lens.
PDL800GPSWH grid and plate
PDL800mac x2 + vdib17756uwe x2
blank 880bm blank
PDL800MAC Is the 30 series adapter mech.
- PDL800MACWH for white
- PDL800MACBK for black
No - PDL692CWH only
or the metal plate options:
PDL692MSS - Stainless Steel
PDL692MBBZ - Brushed Bronze
PDL692MPB - Polished Brass
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
No, the through connect modules only come as "TV" (615MFTV), "SKY" (615MFSKY) or blank (615MF).
The 628MF does come printed with "IN" (628MFIN) but that is Coaxial on front with F-type at the back.
The PDL691MSS is anodised aluminum, as are the MPB and MBBZ versions
PART NO FOR COVER PDL695C
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
The Part Number will be either
PDL815MKC1 Which fits 1x VDIB17766UWE
PDL815MKC2 Which fits 2x VDIB17766UWE
No, the PDL628MFO is only available in white.
You can use the:
Rocker Version - PDL860M16PB or PDL881M16SPB are blank, PDL881M16SP or PDL860M16P have a press icon, PDL881M16SB or 860M16B have a bell icon.
Pushbutton Version - PDL880MT1SPB or PDL880MT2SPB
Also 600 series mecs can be fitted in 800 series plates with the use of PDL800MA, and Clipsal mecs can be fitted using the PDL800MAC.
Any Keystone shaped mechs (Data Jacks)
No - covers are only available in metal
There was a 20A version available for about 6months about 5 years ago (about 2008)
Yes - single pole, two way.
The PDL 615HDMI is only available in white.
Yes, the code is PDL654MBK
Only white covers are available - PDL699CWH (White)
The part number is PDL654MBK
The Modular adaptor PDL800MAC.
Only availble in a single vertical version, part number PDL 691RCD30WH
The Cover is only available in MSS, MPB & MBBZ
The cover (PDL 691C) for the PDL 691 is only available in White (691CWH), Polished Brass (691MPB), Brushed Bronze (691MBBZ) and Stainless Steel (691MSS). Black is not available.
No, this is only designed and tested for switching 230VAC
The 12 and 24V illuminated modules in the PDL610 range are now LEDs, the 250V option remains a Neon
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
The part number for a knob to suit the PDL654MWH is a PDL620PWH.
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
Yes, the PDL 699CWH is the white cover plate to suit the PDL 699.
There are two options available for PDL 600 series :
Standard Item = PDL651
Waterproof IP56 = PDL651VWP
Colour options = White or Black
The standard PCU module only is PDL651M2, the IP56 module is not available as a spare part.
The PDL 860M16 is a 1way switch
The PDL691M16 is a 2way switch that is the same size.
There is no Indicator option available for the 2 way switch in this size.
No, But it can be made by removing the Keystone USB jack from the PDL815USB1WH and installing that into the PDL615MKCWH adapter.
No, Architrave grid and plate available PDL561VH but switch mech needs to be purchased separately.
The part code for a standard switch is the PDL681M20
The installation sheet for the 100MPIR is at
Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.
With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.
There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at: