No the PDL619MM is only suitable for use with communications mechs (TV, Data, USB) as the mech will be recessed so it is not suitable for switches, dimmers, fan speed controllers.
Yes, the part number is PDL610ML24RD.
You will need a PDL 800MA adaptor + PDL 617M2 telephone mech or a data mech PDL619MD
The part code is:
White and black only.
The part name is as follows: PDL600ME
Only white covers are available - PDL699CWH (White)
No, the through connect modules only come as "TV" (615MFTV), "SKY" (615MFSKY) or blank (615MF).
The 628MF does come printed with "IN" (628MFIN) but that is Coaxial on front with F-type at the back.
Yes, PDL699TB will suit the 14470019 modem
The part number is PDL615MKC
PDL689VH - Grid and cover
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
No, this item is no longer available
Its replacment is now a Module PDL600SM
Supplied with interchangable white, black, cream and ivory faceplates.
The variable fan speed control code is PDL625F or PDL625FM (Module) the rating of this fan control is 500VA
Yes, All of the PDL640MF RCA sockets are RCA connection on front with F-Type connection on the back.
mounting block for 661VH double architrave = PDL560
moutning plate for 689VH double worktop =pdl567S
Yes you can remove the 815USB1 from its 800 series clip and install it into a PDL615MKC adaptor
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
When you purchase a 600SM it comes with a White and Black cover and you can put on either one.
The PDL600RM is rated 16A resistive (6A inductive) and has a NO & NC contact. It is a 600 series module so can be mounted in a grid plate, but doesn't have to be as there is no built in indication as to the state of the contacts.
PART NO FOR COVER PDL695C
The 600SM protects all other devices on the circuit but it can only handle a limited number of surges.
For more information see attched installation sheet.
No the PDL 695R is only available in white - PDL695RWH
No it isn't. No testing has been carried out.
No. Unfortunately, there is no cover available for PDL695T.
This device does not provide downstream (or upstream) protection to
other sockets on the same circuit.
This is specifically for over current and over terperature protection for the sockets on the plate.
Note:This is not an RCD.
(see attached Data sheet)
The part number is PDL695XCWH
No, White and metal covers only.
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
The cover (PDL 691C) for the PDL 691 is only available in White (691CWH), Polished Brass (691MPB), Brushed Bronze (691MBBZ) and Stainless Steel (691MSS). Black is not available.
It depends on the type of TV connection you require.
For PAL connection you will need to get PDL800MA(adaptor) and PDL628M mech
For Pay TV(F-Type) connection you can use the PDL815MF2
For HDMI connection you can use the PDL815HDMI
The part number for a PDL surface socket outlet , plug base is - PDL51MB
Yes, You can use the PDL695X and install a PDL694MUSB in place of the extra switch.
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
Yes, A 642MUSB will fit in the position of the extra switch in a 695X
Or that can be purchased as a complete plate using the part code PDL695USB