The 620K is leading edge.
No, that is completely discontinued.
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
We do not have a direct replacement for that dimmer option.
Levco are the suppliers of Hospitality cards +64 9 444 0161
The card is not supplied in the PDL626N pack.
There is and the part code is PDL927
They are available in 3 different sizes:
16mmx6 - 32 UNC = PDL201
30mmx6 - 32 UNC = PDL202 (standard size)
50mmx6 - 32 UNC = PDL204
Please see attached instruction sheet - complete with cleaning instructions.
The clip for these is a PDL727, although the 700 series fuse carriers are now discontinued.
Heaters installed before July 2006, the product is not affected by this recall.
Attached is the Recall Notice information regarding the PDL3208 Thermosafe bathroom heater.
As the 620K is a leading edge dimmer it is not suitable for electronic transformers.
The transformer should be changed for a wire wound or the dimmer should be replaced with trailing edge, though as we only do 450w rated dimmers the load would have to be split between two dimmers.
The PDL620K is no longer available.
No spare parts available, need to order complete unit
The Clipsal 7006A
(available in white only) is the suggested alternative.
The PDL 620P Dimmer Knob Pack comes with a small dimmer knob and a large dimmer knob.
Yes, we do have metal cover plates for the PDL600 series switches. The part number for a single gang cover is 681M.
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
We do not sell solid links for the PDL720
It depends on the type of TV connection you require.
For PAL connection you will need to get PDL800MA(adaptor) and PDL628M mech
For Pay TV(F-Type) connection you can use the PDL815MF2
For HDMI connection you can use the PDL815HDMI
Improved LED dimming
There has been a change to the dimmer This range has been improved to better control LEDs and LED drivers at lower light levels
A small new yellow label has been placed on both the product bag and the carton label ("Improved for LED")
The 12 and 24V illuminated modules in the PDL610 range are now LEDs, the 250V option remains a Neon
No unfortunately we only make the 20A mechanisms now.
No the ZB5 range is what should be used
The mounting Block to suit is the PDL567S
No, it has been discontinued.
No, unfortunately there isn't an adapter so you can fit 30 series mechanisms into a PDL 600 series plate.
The PDL204 is the longest Screw Length we have and that is 50mm.
A longer screw would need to be sourced through a third party. the Thread type is 6/32 UNC
The part name is as follows: PDL600ME
There are 3 different sizes of fixing screws. The code for these are:
16mmx6-32UNC - PDL201
30mmx6-32UNC - PDL202
50mmx6-32UNC - PDL204
They all come as a pack of 100.
The Part code is PDL692USBWH
Yes, the 223H can fit the PDL 600 series plates.
The part code is:
The part code is
Dimensions 51mm x 51mm x 9mm
Yes, the part number is PDL610ML24RD.
Unfortunately, It only comes in white.
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
Opal PDL94OP & Clear PDL94CL
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
Old discontinued - 1000W dimmer PDL620KWH
No. Only available in white or black.