Improved LED dimming
There has been a change to the dimmer This range has been improved to better control LEDs and LED drivers at lower light levels
A small new yellow label has been placed on both the product bag and the carton label ("Improved for LED")
No. Unfortunately, there is no cover available for PDL695T.
Supplied with interchangable white, black, cream and ivory faceplates.
The variable fan speed control code is PDL625F or PDL625FM (Module) the rating of this fan control is 500VA
No it isn't. No testing has been carried out.
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
The part number for a dimmer in PDL that will cover LED's is a PDL624TMWH.
Levco are the suppliers of Hospitality cards +64 9 444 0161
The card is not supplied in the PDL626N pack.
Yes, PDL699TB will suit the 14470019 modem
It depends on the type of TV connection you require.
For PAL connection you will need to get PDL800MA(adaptor) and PDL628M mech
For Pay TV(F-Type) connection you can use the PDL815MF2
For HDMI connection you can use the PDL815HDMI
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
No the PDL619MM is only suitable for use with communications mechs (TV, Data, USB) as the mech will be recessed so it is not suitable for switches, dimmers, fan speed controllers.
No, only available in white
No, there is no Clipsal alternative available
Don't need to use an isolator
No, it is a one way switch only.
No, this item is no longer available
Its replacment is now a Module PDL600SM
PDL625C3M (2uF and 3uF)
PDL625C3/1M (1uF and 2uF)
See attached Data sheet
Yes, All of the PDL640MF RCA sockets are RCA connection on front with F-Type connection on the back.
The mounting block to suit is the PDL565WH
Best to contact the Lamp manufacturer
The PDL654M dimmer or the Push button dimmer PDL654PBM
May be suitable but not spec'd. Rather use a 625F which has a minimum load of 40W
Max load is 100VA as per data sheet
When you purchase a 600SM it comes with a White and Black cover and you can put on either one.
The PDL854M has been tested on Clipsal LED loads. Other loads may differ in performance.
No there is only a single horizontal socket available with 2 extra switches.
Yes, you can use the PDL694XX with 2 of the PDL642MUSB charger mechs.
Clipsal trailing edge dimmer module code is 32E450TM
PDL trailing edge dimmer module code is PDL624TM
both of these dimmer have been improved for LEDs
The PDL600RM is rated 16A resistive (6A inductive) and has a NO & NC contact. It is a 600 series module so can be mounted in a grid plate, but doesn't have to be as there is no built in indication as to the state of the contacts.
No - only double, There are quad power points available in the 600 series
PDL641WH Vertical 4 outlet, switched
PDL644WH Horizontal 4 outlet, switched
The 620K is leading edge.
Use a PDL654PBM - Push Button Universal Dimmer Module.
This has a minimum load of 10W
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
No. Only available in white or black.
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
The 600SM protects all other devices on the circuit but it can only handle a limited number of surges.
For more information see attched installation sheet.
It can be made using the following part numbers - PDL694XX + 642MUSB (x2)
No, does not have the ability to have 2 x usb mechs.
The only option we could do is a PDL694XX - Pop out the 2 x extra sockets and replace with PDL642MUSB x 2
No - the only cover plate available is white. PDL641CWH
The part number is PDL641CWH.
The Clipsal 7006A
(available in white only) is the suggested alternative.