No. Only available in white or black.
The part number is PDL641CWH.
The PDL641 is available in both black and white.
No - the only cover plate available is white. PDL641CWH
No, there is no round earth pin equivalent of the PDL644.
Opal PDL94OP & Clear PDL94CL
Yes - PDL644C (4 way switched socket 10A)
Available in White only
The cover (PDL 691C) for the PDL 691 is only available in White (691CWH), Polished Brass (691MPB), Brushed Bronze (691MBBZ) and Stainless Steel (691MSS). Black is not available.
No, Only the complete Unit is available in Red:
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
No - only double, There are quad power points available in the 600 series
PDL641WH Vertical 4 outlet, switched
PDL644WH Horizontal 4 outlet, switched
Modena and strato both now fits the new standrad PDL144M or PDL144P flush box
The Clipsal 7006A
(available in white only) is the suggested alternative.
what colour options for PDL661
black, white, mpb(polished brass), mss(stainless steel),mbbz(brushed bronze)
Yes the Part code is PDL642MUSBBK
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.
The part number is PDL679CWH.
The 12 and 24V illuminated modules in the PDL610 range are now LEDs, the 250V option remains a Neon
No -The only cover plate available for the PDL 641 is white (PDL641CWH).
The complete unit is available in both black (BK) and white (WH).
No Mech available but the PDL647 range switch plate is 45A double pole.
No, it is only available in white - PDL644CWH
No, the PDL644 is only available in white and black.
No, that is completely discontinued.
Yes, the PDL 682 coverplate is the same one used for the PDL 651. The metal cover plates are available in Polished Brass (PB), Brushed Bronze (BBZ) and Stainless Steel (SS).
Code example (PDL 651 coverplate in Polished Brass): PDL 682MPB
The size for a modena Single Switch PDL881V - 85mm (W) x 124mm (H) x 9mm (D) - Mounting Centres - 84mm
PDL681WH - Plate size 118mm(h) x 74mm(w) - Mounting centres 84mm
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
You can use PDL571R or PDL573R
The 620K is leading edge.
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
- Outside measurements: 137mm x 89mm
- Inside measurements: 76mm x 56mm
Unfortunately, It only comes in white.
There is and the part code is PDL927
the is a PDL644Pwh which has a single LED for RCD protected indicator sockets
The replacement for the PDLMC410 is the 56C410.