No. Only available in white or black.
No, there is no round earth pin equivalent of the PDL644.
Yes - PDL644C (4 way switched socket 10A)
Available in White only
The part number is PDL641CWH.
No, it is only available in white - PDL644CWH
Modena and strato both now fits the new standrad PDL144M or PDL144P flush box
Opal PDL94OP & Clear PDL94CL
No, the PDL644 is only available in white and black.
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
the is a PDL644Pwh which has a single LED for RCD protected indicator sockets
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
The minimum load is 20W 0.1A
The maximum load is 450W 1.8A
The PDL641 is available in both black and white.
No - the only cover plate available is white. PDL641CWH
No - only double, There are quad power points available in the 600 series
PDL641WH Vertical 4 outlet, switched
PDL644WH Horizontal 4 outlet, switched
No it isn't. No testing has been carried out.
The Clipsal 7006A
(available in white only) is the suggested alternative.
No. This product is only available in white.
Yes the Part code is PDL642MUSBBK
No, it is no longer available that is a discontinued colour.
The Base is Nylon and the cover is ABS.
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
The part number is PDL679CWH.
No, but the clips can be purchased separately.
PDL534P8S(8 gang stainless steel mounting plate with white clips)+ 8x PDL533BK (Black mounting clips to replace the white ones.)
Improved LED dimming
There has been a change to the dimmer This range has been improved to better control LEDs and LED drivers at lower light levels
A small new yellow label has been placed on both the product bag and the carton label ("Improved for LED")
No Mech available but the PDL647 range switch plate is 45A double pole.
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
No, that is completely discontinued.
The PDL854M has been tested on Clipsal LED loads. Other loads may differ in performance.
PDL534P16S, PDL534P24S, PDL534P8
The 620K is leading edge.
Unfortunately, It only comes in white.
There is and the part code is PDL927
4 gang horizontal switched socket with 3 x 10A sockets and 1 x 15A socket.
PART NO FOR COVER PDL695C
No, the PDL89SPis available in white only.