The mounting block to suit is the PDL565WH
No, there is no metal plate available for the PDL663VH. Only black or white.
mounting block for 661VH double architrave = PDL560
moutning plate for 689VH double worktop =pdl567S
The part number is PDLO692CWH
No, Architrave grid and plate available PDL561VH but switch mech needs to be purchased separately.
The part code for a standard switch is the PDL681M20
PDL689VH - Grid and cover
no, it is only available in white or black
Yes you can by using PDL683VH plate + PDL642MUSB x 3
Only white covers are available - PDL699CWH (White)
The PDL681VH will suit the 100MPIR.
No - only double, There are quad power points available in the 600 series
PDL641WH Vertical 4 outlet, switched
PDL644WH Horizontal 4 outlet, switched
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
No that is only available in white.
You could use PDL661VHWH with PDL600BWH
No, that is completely discontinued.
The part number is PDL565WH
That can be made using the following parts:
PDL615HDMIWHx2 + PDL682VHWH
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
There is no C2000 equivelant. The closest option in clipsal would be the blank 2000 series grid and surround - 2031VX-WE
No - PDL692CWH only
or the metal plate options:
PDL692MSS - Stainless Steel
PDL692MBBZ - Brushed Bronze
PDL692MPB - Polished Brass
Yes it is, the part code is PDL650BVHBK
Part number PDLZ685WH is the same as PDL685WH
it has a different prefix.
the PDL685 and PDL686 take the exact same cover plate - PDL686CWH
The size for a modena Single Switch PDL881V - 85mm (W) x 124mm (H) x 9mm (D) - Mounting Centres - 84mm
PDL681WH - Plate size 118mm(h) x 74mm(w) - Mounting centres 84mm
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
The 620K is leading edge.
The replacement is a PDL 680
we have a range of 32amp switch and 45anmp switch which should suit
PDL380M32 , PDL680M32wh 32amp
There is no 52A option in the 600 series. the highest rating available in that range is the PDL647WH which is 45A
Yes but they have to be purchased with the grid plate also ie: PDL681VHWH, PDL682VHWH and so on.
Levco are the suppliers of Hospitality cards +64 9 444 0161
The card is not supplied in the PDL626N pack.
We do not have a direct replacement for that dimmer option.
It depends on the type of TV connection you require.
For PAL connection you will need to get PDL800MA(adaptor) and PDL628M mech
For Pay TV(F-Type) connection you can use the PDL815MF2
For HDMI connection you can use the PDL815HDMI
Improved LED dimming
There has been a change to the dimmer This range has been improved to better control LEDs and LED drivers at lower light levels
A small new yellow label has been placed on both the product bag and the carton label ("Improved for LED")
The installation sheet for the 100MPIR is at
Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.
With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.
There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:
As the 620K is a leading edge dimmer it is not suitable for electronic transformers.
The transformer should be changed for a wire wound or the dimmer should be replaced with trailing edge, though as we only do 450w rated dimmers the load would have to be split between two dimmers.
The PDL620K is no longer available.