The mounting block to suit is the PDL565WH
No, there is no metal plate available for the PDL663VH. Only black or white.
mounting block for 661VH double architrave = PDL560
moutning plate for 689VH double worktop =pdl567S
No - only double, There are quad power points available in the 600 series
PDL641WH Vertical 4 outlet, switched
PDL644WH Horizontal 4 outlet, switched
No, Architrave grid and plate available PDL561VH but switch mech needs to be purchased separately.
The part code for a standard switch is the PDL681M20
PDL689VH - Grid and cover
no, it is only available in white or black
Yes you can by using PDL683VH plate + PDL642MUSB x 3
Only white covers are available - PDL699CWH (White)
The PDL681VH will suit the 100MPIR.
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
Yes - PDL644C (4 way switched socket 10A)
Available in White only
No that is only available in white.
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
the is a PDL644Pwh which has a single LED for RCD protected indicator sockets
You could use PDL661VHWH with PDL600BWH
The part number is PDLO692CWH
No, that is completely discontinued.
No, only available in white
No, it is only available in white - PDL644CWH
The part number is PDL565WH
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
There is no C2000 equivelant. The closest option in clipsal would be the blank 2000 series grid and surround - 2031VX-WE
The part number for a knob to suit the PDL654MWH is a PDL620PWH.
Yes it is, the part code is PDL650BVHBK
Part number PDLZ685WH is the same as PDL685WH
it has a different prefix.
the PDL685 and PDL686 take the exact same cover plate - PDL686CWH
No there is only a single horizontal socket available with 2 extra switches.
Yes, you can use the PDL694XX with 2 of the PDL642MUSB charger mechs.
The size for a modena Single Switch PDL881V - 85mm (W) x 124mm (H) x 9mm (D) - Mounting Centres - 84mm
PDL681WH - Plate size 118mm(h) x 74mm(w) - Mounting centres 84mm
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
The replacement is a PDL 680
we have a range of 32amp switch and 45anmp switch which should suit
PDL380M32 , PDL680M32wh 32amp
There is no 52A option in the 600 series. the highest rating available in that range is the PDL647WH which is 45A
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
No. Only available in white or black.
It can be made using the following part numbers - PDL694XX + 642MUSB (x2)
No, does not have the ability to have 2 x usb mechs.
The only option we could do is a PDL694XX - Pop out the 2 x extra sockets and replace with PDL642MUSB x 2
No - the only cover plate available is white. PDL641CWH
The part number is PDL641CWH.
No it isn't. No testing has been carried out.
The Clipsal 7006A
(available in white only) is the suggested alternative.
No, there is no round earth pin equivalent of the PDL644.
The part number is PDL679CWH.