You can use the:
Rocker Version - PDL860M16PB or PDL881M16SPB are blank, PDL881M16SP or PDL860M16P have a press icon, PDL881M16SB or 860M16B have a bell icon.
Pushbutton Version - PDL880MT1SPB or PDL880MT2SPB
Also 600 series mecs can be fitted in 800 series plates with the use of PDL800MA, and Clipsal mecs can be fitted using the PDL800MAC.
No, the LED is Built in and not available separately.
It is a standard 681M20 rocker switch mech engraved forward/reverse
The part code is PDL 681MT10PB
Yes, the Indicator works on both 240VAC and 24VDC.
The part codes are - Latching - 681MT16, Non-Latching - 681MT10PB
This product is only available in White, the part number is PDL681M16HFPWH
The blank module is available in black (PDL 681M16HFBK).
The printed modules (PDL 681M16HFALWH, PDL 681M16HFFWH, PDL 681M16HFMWWH and PDL 681M16HFSWH), clear protective lid with labelling card module (PDL 681M16HFCLWH) and press module (PDL 681M16HFPWH) are all only available in white.
The part number for this is a PDL687M10WH
2 way dimming/switching is not possible with the push button dimmers. They are an on/off switch that is energized into an off state and there is no way to 2 way dim/switch unless using standard switches with a rotary dimmer.
Alternatively, 2 way dimming can be acheived in the 600 series by using an Iconic dimmer (PDL354PB) and x2 momentary push puttons (PDL681M10PB).
No, this product is available in white only.
PDL882M10N amber neon
PDL882M10NBL blue neon
S2 Module size.
PDL880BM blank mech mech
There was a 20A version available for about 6months about 5 years ago (about 2008)
No, this is only designed and tested for switching 230VAC
The Grid plate and cover are the PDL800GV + PDL800PSVWH
The mechs to go inside are the PDL800MA with a PDL651M2 and standard size Switch module PDL882M10NBL
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
No, Architrave grid and plate available PDL561VH but switch mech needs to be purchased separately.
The part code for a standard switch is the PDL681M20