No, the LED is Built in and not available separately.
The part code is
PDL686MBBZ (covers the outside)
The PDL 860M16 is a 1way switch
The PDL691M16 is a 2way switch that is the same size.
There is no Indicator option available for the 2 way switch in this size.
No, must be purchased seperately - Indicator inserts page 25 - 2014 PDL pocket book
Amber - 800N240
Switch - 800L240MBL
Sockets - 800L240SBL
There was a 20A version available for about 6months about 5 years ago (about 2008)
Yes - single pole, two way.
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
No, this is only designed and tested for switching 230VAC
The blank module is available in black (PDL 681M16HFBK).
The printed modules (PDL 681M16HFALWH, PDL 681M16HFFWH, PDL 681M16HFMWWH and PDL 681M16HFSWH), clear protective lid with labelling card module (PDL 681M16HFCLWH) and press module (PDL 681M16HFPWH) are all only available in white.
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
This product is only available in White, the part number is PDL681M16HFPWH
You can use the:
Rocker Version - PDL860M16PB or PDL881M16SPB are blank, PDL881M16SP or PDL860M16P have a press icon, PDL881M16SB or 860M16B have a bell icon.
Pushbutton Version - PDL880MT1SPB or PDL880MT2SPB
Also 600 series mecs can be fitted in 800 series plates with the use of PDL800MA, and Clipsal mecs can be fitted using the PDL800MAC.
It is a standard 681M20 rocker switch mech engraved forward/reverse
Yes, part code PDL687M4BK
No - 2 way option
only 1 way
No, Architrave grid and plate available PDL561VH but switch mech needs to be purchased separately.
The part code for a standard switch is the PDL681M20
PDL800G 1 PCE
PDL800PS* 1 PCE
PDL861M16* 6 PCE
* colour code
The PDL691MSS is anodised aluminum, as are the MPB and MBBZ versions
Yes it is a Two Way with Optional LED
No, the PDL695/15 is only available in white.
Yes it can, but if 3 way switching is required, please use an additional 600RM relay. (see install sheet for wiring diagram)
As a general rule of thumb -
PDL items require PDL at the front of the code.
600 series item codes start with 6.
600 series switch codes start with 68.
The number of switches fitted in the plate is the 3rd number in the code, 681 = single 600 series switch, 682 = double 600 series switch
600 series socket codes start with 69.
The 3rd digit in a socket code indicates the type of socket, 691 = single vertical socket, 692 = double vertical socket, 694 = single horizontal socket, 695 = double horizontal socket.
Most codes require a colour code at the end, WH = white, BK = black.
eg. To order a black double vertical switched socket the complete code would be PDL692BK.
800 series (Modena) item codes start with 8 and follow the same format as above. (800 series items with Strato plates start with S8...)
eg. An 800 series Modena double switch in white = PDL882WH, a Strato double horizontal switched socket in black = PDLS895BK
In both series metal cover plates are an extra option to be supplied separately, coded to fit the plate required, eg. 600 series single switch metal plate in Stainless Steel = PDL681MSS (M = Metal, BBZ = Brushed Bronze, PB = Polished Brass) Some plastic cover plates are available eg. PDL681CWH (C = Cover), PDL800PSCH (PS = Plastic Surround, CH = Champagne, there are 9 colour options in 800 series)
Strato brushed aluminium plates also need BK or WH to decide the trim colour, eg. PDLS800CBABK or PDLS800CBAWH (C = Cover , BA = Brushed Aluminium)
Module grids with covers are available in BK or WH, eg. PDL684VHWH (VH = vertical/horizontal since the grid is empty and module can be fitted either way), PDLS800GPSBK (GPS = Grid, Plate, & Surround).
Grids without covers included are only available in Modena 800 series, PDL800G (horizontal) or PDL800GV (vertical)
Refer pdl.co.nz for further details and options.
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
The PDL 681CWH is the white cover plate to suit the PDL 681HWP
There are two options available for PDL 600 series :
Standard Item = PDL651
Waterproof IP56 = PDL651VWP
Colour options = White or Black
The standard PCU module only is PDL651M2, the IP56 module is not available as a spare part.
No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.
PDL381-VW is a complete switch including grid plate & switch mechanism.
The separate parts to make this are PDL381G + PDL381C-VW + PDL381M20
The installation sheet for the 100MPIR is at
Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.
With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.
There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at: