Used for collateral as web image

682VWPDL WH VERT W/P SW-LG N

Catalogue Number: PDL682VWPD
Used for collateral as web image
Colour: White
Colour: Per UOM Std.
  • White 1 PCE 1

Specifications

hide show
Range of product
600 Series
Product or component type
switch
Control type
rocker
Material
PC (polycarbonate)
Colour tint
white
Surface finish
gloss
Installation direction
vertical
Length
74 mm
Width
118 mm
Rated current
  • 20 A
  • 16 AX
    • [Ue] rated operational voltage
      250 V
      Network type
      AC
      Motor M-rating AS3133
      M50
      Number of gangs
      2 gangs
      Number of poles
      1
      Mounting mode
      surface mounted
      Fixing center
      84 mm
      Ambient air temperature for operation
      -10-40 °C
      Cable cross section
    • 2 x 2.5-2.5 mm²
    • 4 x 1.5-1.5 mm²
      • REACh Regulation
        Reference contains Substances of Very High Concern above the threshold
        EU RoHS Directive
        Compliant
        Mercury free
        Yes
        RoHS exemption information
        Yes
        China RoHS Regulation
        Product out of China RoHS scope. Substance declaration for your information
        Circularity Profile
        N/A

        Documents & downloads

        hide show
        Filter items
        • All

        • Product Brochures

        • Operating Manuals

        • Certificates (MSDS)

        Frequently Asked Questions

        hide show

        what is pdl683vwpd marked with

         The switches are marked with Light, fan and heat 

        What is the metal plate cover to suit the PDL683VWP

        You can use PDL683WPMBBZ

        Are there plastic covers for the pdl683vwp?

        No, only available in metal options.

        What is the 600 series 3 gang switch that the switches are in a pyramid configuration?

        That is the PDL683VWP, Waterproof switchplate (IP56)
        They can be found on page 33 of the 2014 PDL Pocketbook.

        Is it possible to change the mechs in the PDL684VWPWH

        No, once the mechs have been removed the IP rating is no longer warrantee

        Does the PDL683WPM come in white

        No, that is only available in Brushed Bronze - PDL683WPMBBZ and stainless steel - PDL683WPMMSS

        Does Clipsal still do the PDL, 600 Series, cover plates in 1,2 and 3 gang?

        Yes but they have to be purchased with the grid plate also ie: PDL681VHWH, PDL682VHWH and so on.

        Does the normal PDL681 have an IP56 rating?

        No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
        Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.

        600 series 2 gang hdmi

        That can be made using the following parts:
        PDL615HDMIWHx2 + PDL682VHWH

        What is the IP rating for PDL 500 / 600 series light switches

        681M20 Switches are not IP rated. 
        You can use the VWP (waterproof) range of switches this is rated IP56  PDL681VWP
        We also have this available in 300 series PDL381VWP which is IP44 for wet hands

        What is the part number for a double vertical switch in Modena?

        PDL882VWH

        What is the part number for a PDL weatherproof IP66 3 gang switch?

        The part number for a PDL weatherproof IP66 3 gang switch is - PDL683HWP or PDL683VWP

        For further information , visit links below:-
        https://www.clipsal.com/Trade/search-results?q=683HWP
        https://www.clipsal.com/Trade/search-results?q=683VWP
        User-added image

        What is the code for just a PDL685VHWH cover plate?

        the PDL685 and PDL686 take the exact same cover plate - PDL686CWH

        Will the PDL100MPIR sensor mechanism fit into PDLZ681WH, PDLZ682WH, PDLZ683WH etc.?

        Yes, it will fit as it is a standard size PDL mechanism.

        What is the Code for the PDL683 black cover ?



        Code = PDL683VHBK

        What is part no for plate to accommodate PDLZ619M4

        pART NO pdl681vhwh

        Is the 692C available in black?

        No - PDL692CWH only
        or the metal plate options:
        PDL692MSS - Stainless Steel
        PDL692MBBZ - Brushed Bronze
        PDL692MPB - Polished Brass

        What is the cover plate code for a PDL688VH?

        There is no Plastic cover plate available but the code for the metal cover plates is as follows:
        PDL688MPB (Polished Brass)
        PDL688MBBZ (Brushed Bronze)
        PDL688MSS (Stainless Steel)

        Is there a cover plate for the PDL 675?

        Yes it suits the 686 cover plate:
        PDL686CWH - 686C WHITE COVER
        PDL686MSS - 686MSS STAINLESS STEEL COVER
        PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
        PDL686MPB - 686MPB POLISHED BRASS COVER

        what is the part number for the PDL 600 series triple gang plate?

        PDL683CWH only available in White

         

        What plate is required to fit the on/off and auto/manual switches with a 100MPIR?

        The installation sheet for the 100MPIR is at
        https://www.pdlglobal.com/data/product_documents/100MPIR%20Install%20sheet.pdf

        Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.

        With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.

        There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:
        https://www.pdl.co.nz/product-details.aspx?rcat=products&catid=0&id=903

        How do the PDL 600 and 800 series product codes work?

        As a general rule of thumb -
        PDL items require PDL at the front of the code.
        600 series item codes start with 6.
        600 series switch codes start with 68.
        The number of switches fitted in the plate is the 3rd number in the code, 681 = single 600 series switch, 682 = double 600 series switch
        600 series socket codes start with 69.
        The 3rd digit in a socket code indicates the type of socket, 691 = single vertical socket, 692 = double vertical socket, 694 = single horizontal socket, 695 = double horizontal socket.
        Most codes require a colour code at the end, WH = white, BK = black.
        eg. To order a black double vertical switched socket the complete code would be PDL692BK.
        800 series (Modena) item codes start with 8 and follow the same format as above. (800 series items with Strato plates start with S8...)
        eg. An 800 series Modena double switch in white = PDL882WH, a Strato double horizontal switched socket in black = PDLS895BK 
        In both series metal cover plates are an extra option to be supplied separately, coded to fit the plate required, eg. 600 series single switch metal plate in Stainless Steel = PDL681MSS (M = Metal, BBZ = Brushed Bronze, PB = Polished Brass) Some plastic cover plates are available eg. PDL681CWH (C = Cover), PDL800PSCH (PS = Plastic Surround, CH = Champagne, there are 9 colour options in 800 series)
        Strato brushed aluminium plates also need BK or WH to decide the trim colour, eg. PDLS800CBABK or PDLS800CBAWH (C = Cover , BA = Brushed Aluminium)
        Module grids with covers are available in BK or WH, eg. PDL684VHWH (VH = vertical/horizontal since the grid is empty and module can be fitted either way), PDLS800GPSBK (GPS = Grid, Plate, & Surround).
        Grids without covers included are only available in Modena 800 series, PDL800G (horizontal) or PDL800GV (vertical)
        Refer pdl.co.nz for further details and options.

        What is the code for a single switch 600 series cover plate in white?

        Code = PDL681CWH

        What is the Code for the metal cover plate for the PDL685VH?

        The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)

        Is part number PDLZ685WH the same as PDL685WH?

        Part number PDLZ685WH is the same as PDL685WH
        it has a different prefix.

        What is the part number of the PDL mechanism to suit PDL681VH?

        The part number of the mechanism to suit PDL681VH is PDL681M20. PDL681M20 is rated to 20A/16AX, 250V AC, 1 pole, 1 way/2 way.
        For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=681M20
        User-added image

        Is there a white cover plate available for the PDL 681HWP?

        The PDL 681CWH is the white cover plate to suit the PDL 681HWP