No. Only available in white or black.
Yes - PDL644C (4 way switched socket 10A)
Available in White only
the PDL685 and PDL686 take the exact same cover plate - PDL686CWH
No, there is no round earth pin equivalent of the PDL644.
PDL686C cover plate will fit the PDL696RCD
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
No, Only the complete Unit is available in Red:
PART NO FOR COVER PDL695C
The minimum load is 20W 0.1A
The maximum load is 450W 1.8A
The part number is PDL641CWH.
No, it is only available in white - PDL644CWH
No it isn't. No testing has been carried out.
Yes the Part code is PDL642MUSBBK
No, it is no longer available that is a discontinued colour.
The cover (PDL 691C) for the PDL 691 is only available in White (691CWH), Polished Brass (691MPB), Brushed Bronze (691MBBZ) and Stainless Steel (691MSS). Black is not available.
Improved LED dimming
There has been a change to the dimmer This range has been improved to better control LEDs and LED drivers at lower light levels
A small new yellow label has been placed on both the product bag and the carton label ("Improved for LED")
The PDL641 is available in both black and white.
894USB and 842M USB Chargers USB Charger Module 1.2 amp 6 watts , Modular USB charger
No Mech available but the PDL647 range switch plate is 45A double pole.
No, the PDL644 is only available in white and black.
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
No, that is completely discontinued.
No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.
The size for a modena Single Switch PDL881V - 85mm (W) x 124mm (H) x 9mm (D) - Mounting Centres - 84mm
PDL681WH - Plate size 118mm(h) x 74mm(w) - Mounting centres 84mm
The PDL854M has been tested on Clipsal LED loads. Other loads may differ in performance.
The 620K is leading edge.
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
You need to use a PDL568CK this unit has a common key
Opal PDL94OP & Clear PDL94CL
No, But they can be purchased seperatly PDL800N240
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
You will require LED as an accessory (indicator Insert) 800L240MBL page 25 pocket book