1 to 4 gang VH plates 681 to 684 ending with
VIDWH or HIDWH ie PDL681VIDWH or PDL684HIDWH
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
No, Only the complete Unit is available in Red:
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
the PDL685 and PDL686 take the exact same cover plate - PDL686CWH
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
As a general rule of thumb -
PDL items require PDL at the front of the code.
600 series item codes start with 6.
600 series switch codes start with 68.
The number of switches fitted in the plate is the 3rd number in the code, 681 = single 600 series switch, 682 = double 600 series switch
600 series socket codes start with 69.
The 3rd digit in a socket code indicates the type of socket, 691 = single vertical socket, 692 = double vertical socket, 694 = single horizontal socket, 695 = double horizontal socket.
Most codes require a colour code at the end, WH = white, BK = black.
eg. To order a black double vertical switched socket the complete code would be PDL692BK.
800 series (Modena) item codes start with 8 and follow the same format as above. (800 series items with Strato plates start with S8...)
eg. An 800 series Modena double switch in white = PDL882WH, a Strato double horizontal switched socket in black = PDLS895BK
In both series metal cover plates are an extra option to be supplied separately, coded to fit the plate required, eg. 600 series single switch metal plate in Stainless Steel = PDL681MSS (M = Metal, BBZ = Brushed Bronze, PB = Polished Brass) Some plastic cover plates are available eg. PDL681CWH (C = Cover), PDL800PSCH (PS = Plastic Surround, CH = Champagne, there are 9 colour options in 800 series)
Strato brushed aluminium plates also need BK or WH to decide the trim colour, eg. PDLS800CBABK or PDLS800CBAWH (C = Cover , BA = Brushed Aluminium)
Module grids with covers are available in BK or WH, eg. PDL684VHWH (VH = vertical/horizontal since the grid is empty and module can be fitted either way), PDLS800GPSBK (GPS = Grid, Plate, & Surround).
Grids without covers included are only available in Modena 800 series, PDL800G (horizontal) or PDL800GV (vertical)
Refer pdl.co.nz for further details and options.
No, that is only available in Brushed Bronze - PDL683WPMBBZ and stainless steel - PDL683WPMMSS
It is a PDL worktop, switched socket.
No - covers are only available in metal
There was a 20A version available for about 6months about 5 years ago (about 2008)
the is a PDL644Pwh which has a single LED for RCD protected indicator sockets
The switches are marked with Light, fan and heat
4 gang horizontal switched socket with 3 x 10A sockets and 1 x 15A socket.
PDL683CWH only available in White
No, it is only available in white - PDL644CWH
Yes, the code is PDL654MBK
Not Available - however the PDL894/15BK is available.
Yes, the part number is PDL694XXMBBZ
The part number is PDL654MBK
That can be made using the following parts:
PDL615HDMIWHx2 + PDL682VHWH
Only availble in a single vertical version, part number PDL 691RCD30WH
The Cover is only available in MSS, MPB & MBBZ
No, it is a one way switch only.
No, this is only designed and tested for switching 230VAC
No, the PDL 694X is only available in white
The part number for a knob to suit the PDL654MWH is a PDL620PWH.
The mounting block to suit is the PDL565WH
Part number PDLZ685WH is the same as PDL685WH
it has a different prefix.
Yes - PDL644C (4 way switched socket 10A)
Available in White only
Best to contact the Lamp manufacturer
The PDL654M dimmer or the Push button dimmer PDL654PBM
The PDL 681CWH is the white cover plate to suit the PDL 681HWP
No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.
The installation sheet for the 100MPIR is at
Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.
With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.
There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:
Improved LED dimming
There has been a change to the dimmer This range has been improved to better control LEDs and LED drivers at lower light levels
A small new yellow label has been placed on both the product bag and the carton label ("Improved for LED")
Yes but they have to be purchased with the grid plate also ie: PDL681VHWH, PDL682VHWH and so on.
Use a PDL654PBM - Push Button Universal Dimmer Module.
This has a minimum load of 10W
No, Architrave grid and plate available PDL561VH but switch mech needs to be purchased separately.
The part code for a standard switch is the PDL681M20