the PDL685 and PDL686 take the exact same cover plate - PDL686CWH
Yes it suits the 686 cover plate:
PDL686CWH - 686C WHITE COVER
PDL686MSS - 686MSS STAINLESS STEEL COVER
PDL686MBBZ - 686MBBZ BRUSH BRONZE COVER
PDL686MPB - 686MPB POLISHED BRASS COVER
PDL686C cover plate will fit the PDL696RCD
Levco are the suppliers of Hospitality cards +64 9 444 0161
The card is not supplied in the PDL626N pack.
No, Only the complete Unit is available in Red:
No it isn't. No testing has been carried out.
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
Supplied with interchangable white, black, cream and ivory faceplates.
what colour options for PDL661
black, white, mpb(polished brass), mss(stainless steel),mbbz(brushed bronze)
There is no Metal cover available for that part.
The 685 and the 686 take the same coverplate so the code is the PDL686MSS (for stainless steel)
It depends on the type of TV connection you require.
For PAL connection you will need to get PDL800MA(adaptor) and PDL628M mech
For Pay TV(F-Type) connection you can use the PDL815MF2
For HDMI connection you can use the PDL815HDMI
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
No, that is completely discontinued.
There is no Plastic cover plate available but the code for the metal cover plates is as follows:
PDL688MPB (Polished Brass)
PDL688MBBZ (Brushed Bronze)
PDL688MSS (Stainless Steel)
No it doesn't, but you can use the PDL681VWP as this is IP56 rated.
Refer to PDL Catalogue and Pricing Guide Issue 70, page 33.
The part name is as follows: PDL600ME
The size for a modena Single Switch PDL881V - 85mm (W) x 124mm (H) x 9mm (D) - Mounting Centres - 84mm
PDL681WH - Plate size 118mm(h) x 74mm(w) - Mounting centres 84mm
No, that is only available in Brushed Bronze - PDL683WPMBBZ and stainless steel - PDL683WPMMSS
The PDL854M has been tested on Clipsal LED loads. Other loads may differ in performance.
Yes, the part number is PDL610ML24RD.
The 620K is leading edge.
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
You need to use a PDL568CK this unit has a common key
There was a 20A version available for about 6months about 5 years ago (about 2008)
No, But they can be purchased seperatly PDL800N240
no only stainless steel(PDL647MSS) or brushed bronze(PDL647MBBZ)
You will require LED as an accessory (indicator Insert) 800L240MBL page 25 pocket book
No. Only available in white or black.
White and black only.
PDL880BM blank mech mech
PART NO FOR COVER PDL695C
No the PDL619MM is only suitable for use with communications mechs (TV, Data, USB) as the mech will be recessed so it is not suitable for switches, dimmers, fan speed controllers.