PART NO FOR COVER PDL695C
No. Unfortunately, there is no cover available for PDL695T.
Yes each socket is rated for 10A.
It is a date code eg. 3712 is Week 37 of year 2012
The cover (PDL 691C) for the PDL 691 is only available in White (691CWH), Polished Brass (691MPB), Brushed Bronze (691MBBZ) and Stainless Steel (691MSS). Black is not available.
Yes, the PDL392XUAG, comes with a blank in the extra switch spot (392 and 392X have the same grid)
There is and the part code is PDL927
Levco are the suppliers of Hospitality cards +64 9 444 0161
The card is not supplied in the PDL626N pack.
The part number is PDLO692CWH
No the PDL 695R is only available in white - PDL695RWH
No - PDL692CWH only
or the metal plate options:
PDL692MSS - Stainless Steel
PDL692MBBZ - Brushed Bronze
PDL692MPB - Polished Brass
No, the PDL695 is not available in Red.
This device does not provide downstream (or upstream) protection to
other sockets on the same circuit.
This is specifically for over current and over terperature protection for the sockets on the plate.
Note:This is not an RCD.
(see attached Data sheet)
Yes the Part code is PDL642MUSBBK
No, it is no longer available that is a discontinued colour.
The mounting Block to suit is the PDL567S
The part number is PDL695XCWH
No, White and metal covers only.
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
Yes, You can use the PDL695X and install a PDL694MUSB in place of the extra switch.
It comes in BK and WH only
The part number is PDL695CWH
No, that is completely discontinued.
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
Yes, A 642MUSB will fit in the position of the extra switch in a 695X
Or that can be purchased as a complete plate using the part code PDL695USB
There is no metal cover available for the 699 There is only a metal cover for the 699TB version
Dimensions 48mm(h) x 170mm(w), with mounting centres 150mm.
Suits 567L mounting block and 559 mounting bracket.
PDLO695MSS = Stainless Steel
PDLO695MBBZ = Brushed Bronze
PDLO695MPB = Polished Brass
PDLO695CWH = White
The part code is PDLO695MPB .
Only white covers are available - PDL699CWH (White)
Yes, PDL699TB will suit the 14470019 modem
The 620K is leading edge.
The PDL693/2 Has Safety shutters but is unswitched. For Intergrally switched double sockets use the 800 series double sockets like the PDL895A.
Unfortunately, It only comes in white.
The PDL56ED2/40 is deeper and has 40mm conduit entries The pdl56e2 is standard depth with 1 x 25mm and 1 x 32mm conduit entries