No. Unfortunately, there is no cover available for PDL695T.
PART NO FOR COVER PDL695C
No the PDL 695R is only available in white - PDL695RWH
Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon
The part number is PDL695CWH
The PDL693/2 Has Safety shutters but is unswitched. For Intergrally switched double sockets use the 800 series double sockets like the PDL895A.
Unfortunately, It only comes in white.
PDLO695MSS = Stainless Steel
PDLO695MBBZ = Brushed Bronze
PDLO695MPB = Polished Brass
PDLO695CWH = White
The part code is PDLO695MPB .
No, PDL695USBWH - White only.
It can be made out of parts - PDL695XBK + PDL642MUSBBK
Yes, A 642MUSB will fit in the position of the extra switch in a 695X
Or that can be purchased as a complete plate using the part code PDL695USB
No, the PDL695 is not available in Red.
Only white covers are available - PDL699CWH (White)
This device does not provide downstream (or upstream) protection to
other sockets on the same circuit.
This is specifically for over current and over terperature protection for the sockets on the plate.
Note:This is not an RCD.
(see attached Data sheet)
The part number is PDL695XCWH
No, White and metal covers only.
The PDL89DP is only available in white.
Yes, PDL699TB will suit the 14470019 modem
Alternative is ML2025I-WE
or the PDL695Pwh
Yes, You can use the PDL695X and install a PDL694MUSB in place of the extra switch.
- Outside measurements: 137mm x 89mm
- Inside measurements: 76mm x 56mm
No - covers are only available in metal
The part number is PDLO692CWH
No, only available in White
No, only available in white
Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole.
600 series Surge Module Surge Protection
Don't need to use an isolator
Only availble in a single vertical version, part number PDL 691RCD30WH
The Cover is only available in MSS, MPB & MBBZ
No. Only in white. The PDL695/15 is available in black.
No, the PDL695/15 is only available in white.
The variable fan speed control code is PDL625F or PDL625FM (Module) the rating of this fan control is 500VA
No - PDL692CWH only
or the metal plate options:
PDL692MSS - Stainless Steel
PDL692MBBZ - Brushed Bronze
PDL692MPB - Polished Brass
Part number PDLZ685WH is the same as PDL685WH
it has a different prefix.
You will need a PDL 800MA adaptor + PDL 617M2 telephone mech or a data mech PDL619MD
No, there is no replacement covers available for this part.
The part code is:
May be suitable but not spec'd. Rather use a 625F which has a minimum load of 40W
Yes the 695USB comes prewired with charger incorporated.
Max load is 100VA as per data sheet
No unfortunately none of the 15A socket options in the 600 series come with an extra switch.
No there is only a single horizontal socket available with 2 extra switches.
Yes, you can use the PDL694XX with 2 of the PDL642MUSB charger mechs.