Used for collateral, as web image
Used for collateral, as web image
Used for collateral, as web image
Used for collateral, as web image

Socket Outlet 600 Series - Twin switched - Assembled - Horizontal - Neon RCD ON indicator - 250 V - 10 A - White

Catalogue Number: PDL695P
Used for collateral, as web image
Used for collateral, as web image
Used for collateral, as web image
Used for collateral, as web image
Colour: White
Colour: Per UOM Std.
  • Red 1 PCE 1
  • White 1 PCE 1


hide show
Range of product
600 Series
Product or component type
Control type
PC (polycarbonate)
Colour tint
Surface finish
Installation direction
118 mm
74 mm
Rated current
10 A
[Ue] rated operational voltage
250 V
Network frequency
50 Hz
Network number of phases
1 phase
Number of poles
Mounting mode
surface mounted
Fixing center
84 mm
Cable cross section
3 x 2.5-2.5 mm²
Quantity per set
set of 5
Type of packing
REACh Regulation
Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive
Mercury free
RoHS exemption information
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Circularity Profile

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Operating Manuals

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What is the Plate for PDL695P ?


Is a cover available for PDL695T?

No. Unfortunately, there is no cover available for PDL695T.

What is part no for cover to suit PDL695


Is the PDL 695R available in red?

No the PDL 695R is only available in white - PDL695RWH

PDL695P - Can you just buy the RCD Indicator?

Yes you can - The code would be PDL610MNRCD ( 'RCD Protected' Printing) Amber Neon


What is the part number for the PDL695 cover in black


What is the part number of the insulating mounting block to suit PDL695T, thermal protected double socket?

The part number of the insulating mounting block to suit PDL695T is PDL89DI.

For further information, please visit

Is the pdl695 available in red @ 20 amps?

No, the PDL695 is not available in Red.

What is the part number for a PDL 600 series horizontal switch socket with a round earth pin

Part number is PDL695R

What is the part number for a White PDL695 Cover plate.

The part number is PDL695CWH

Does the PDL695T protect downstream and upstream

This device does not provide downstream (or upstream) protection to
other sockets on the same circuit.
This is specifically for over current and over terperature protection for the sockets on the plate.
Note:This is not an RCD.
(see attached Data sheet)


What is the part number for polished brass cover for the PDL698.


What is the part number for the white cover for PDL695X

The part number is PDL695XCWH

Are Black covers available for the pdl695x range?

No, White and metal covers only.

What is the part number for an old style PDL695 cover plate?

PDLO695MSS = Stainless Steel
PDLO695MBBZ = Brushed Bronze
PDLO695MPB = Polished Brass
PDLO695CWH = White

What is the part code for an old style pdl695 in polished brass?

The part code is PDLO695MPB .                                                                                                                                                                                               

Is the cover for the PDL691 available in black? (PDL 691C)

The cover (PDL 691C) for the PDL 691 is only available in White (691CWH), Polished Brass (691MPB), Brushed Bronze (691MBBZ) and Stainless Steel (691MSS). Black is not available.

What is the code for a white cover for pdl695 old style (with Narrow Switches)


What is the alternative to a Clipsal ML2025-WE

Alternative is ML2025I-WE
or the PDL695Pwh

Is there a socket eg. PDL 695WH with a USB charging jack in it as well

Yes, You can use the PDL695X and install a PDL694MUSB in place of the extra switch.

Does PDL89DP come in black ?

Unfortunately, It only comes in white.

Can PDL695X have 642MUSB swapped in?

Yes, A 642MUSB will fit in the position of the extra switch in a 695X
Or that can be purchased as a complete plate using the part code PDL695USB

L1JCN - Is there a spare knob to suit PDL 654M

Yes code is PDL620P

Can you put a USB mech into a PDL692X ?

Yes you can.

Is the PDL89SP mounting block available in black?

No, the PDL89SPis available in white only.

Is the PDL675 shaver socket available vertical and horizontal?

Yes, it is both, Universal 110V and 240V shaver socket vertical/horizontal

What is the rating of the PDL675 shaver outlet?

The PDL675 shaver outlet is rated 20VA @110/230 volts.

Does a PDL952 fit into a 56SO310

Yes it does fit

Whats the minimum load for a PDL654

The minimum load is  20W 0.1A

Whats the Maximum load for a PDL654

 The maximum load is  450W 1.8A

What is the part number of the mounting block to suit PDL699 Double worktop switched socket outlet?

PDL567L is the mounting block to suit PDL699.

Key Features

  • Long worktop
  • Mounting centres: 150 mm
  • 8 x 16 mm knockouts
  • 8 x TPS cable knockouts
  • Suits catalog 699, 699N, 699TB, 699TB/15 and 699TBR
For further information, please visit

What is the code for just a PDL685VHWH cover plate?

the PDL685 and PDL686 take the exact same cover plate - PDL686CWH

Is the PDL955 16A or 10A as the pocket book states

The RCD itself has a max rating of 16A.  However this product only comes with 10A rated plug and socket attached.

Is there a PDL 695 with surge protection

Use a PDL695X and put a PDL600SM in the extra mech space
PDL has a small surge mdoule which can be installed into any 600 series switch hole. 

600 series Surge Module Surge Protection

How do you order a PDL Iconic 395 in colour Anthracite?

Can be ordered using the following codes:
PDL395G + PDL395C-AN

Does the PDL699 have one set of terminals

Yes it does

Is the PDL694 still available in Cream

No, it is no longer available that is a discontinued colour.

Mounting Block to suit PDL698 single worktop socket?

The mounting Block to suit is the PDL567S

What colour is the PDL 89DP, universal mounting block - deep - 37mm depth, available in?

The PDL89DP is only available in white.

What does IP3X stand for on a PDL952

The x means there is no rating for water protection

PDL692 does it have 2 10Amp sockets?

Yes each socket is rated for 10A.

Does the PDL693/2 have Safety Shutters and Integral Switching?

The PDL693/2 Has Safety shutters but is unswitched. For Intergrally switched double sockets use the 800 series double sockets like the PDL895A.

What colours does the PDL699 come in?

It comes in BK and WH only

What is the mounting block for PDL699 ?

Code = PDL567L

What is the sticker on the front of a PDL692 with 3712 written on it

 It is a date code eg. 3712 is Week 37 of year 2012

Is the PDL 675 Auto switched?

Yes, that is switched on as the plug is inserted.

Is the PDL6602 still available?

No, that is completely discontinued.

Do we still do the PDL6312

no, discontinued

Does the PDL695USB come in black?

No, PDL695USBWH - White only.
It can be made out of parts - PDL695XBK + PDL642MUSBBK

Are there any metal finish cover plates available for the PDL 651?

Yes, the PDL 682 coverplate is the same one used for the PDL 651. The metal cover plates are available in Polished Brass (PB), Brushed Bronze (BBZ) and Stainless Steel (SS).
Code example (PDL 651 coverplate in Polished Brass): PDL 682MPB