No, it is a one way switch only.
Best to contact the Lamp manufacturer
The PDL654M dimmer or the Push button dimmer PDL654PBM
Use a PDL654PBM - Push Button Universal Dimmer Module.
This has a minimum load of 10W
Yes, the code is PDL654MBK
The part number is PDL654MBK
No it isn't. No testing has been carried out.
The part number for a knob to suit the PDL654MWH is a PDL620PWH.
The 620 was a leading edge dimmer, the equivalent is the PDL634L, though depending on the load it may be time to upgrade to a universal (PDL654) or push button (PDL654PB) dimmer.
PDL634L installation sheet attached for reference.
No you do not need a separate isolator switch:- short push for on/off, long push to dim
see below for link to Data Sheet
the is a PDL644Pwh which has a single LED for RCD protected indicator sockets
There are two options available for PDL 600 series :
Standard Item = PDL651
Waterproof IP56 = PDL651VWP
Colour options = White or Black
The standard PCU module only is PDL651M2, the IP56 module is not available as a spare part.
No, the PDL 694X is only available in white
Use the following parts:
Yes, it comes as a part of a spare knob pack - PDL 620PBK for black (also available in PDL 620PWH for white).
Yes, this device is rated for up to 300W of dimmable Schneider LED Lighting.
(Please visit clipsal.com/load for recommended loads. For other loads, contact the LED supplier for compatibility advice.)
The PDL641 is available in both black and white.
Supplied with interchangable white, black, cream and ivory faceplates.
No - not as a stocked item.
No, unfortunately this does not come as a complete unit. You will need a PDL681VH to mount the PDL648TM in.
Some of the key features are:
- Elegant design
- Simple one-button user interface
- Modular design compatible with 600 series mounting grids
- Multiple colour choices included
- Stylish LED operating status indicator light
- li>32 Preset timer settings ranging between 15sec to 120min
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=648TM
No, PDL695USBWH - White only.
It can be made out of parts - PDL695XBK + PDL642MUSBBK
The PDL854M has been tested on Clipsal LED loads. Other loads may differ in performance.
2 way dimming/switching is not possible with the push button dimmers. They are an on/off switch that is energized into an off state and there is no way to 2 way dim/switch unless using standard switches with a rotary dimmer.
Alternatively, 2 way dimming can be acheived in the 600 series by using an Iconic dimmer (PDL354PB) and x2 momentary push puttons (PDL681M10PB).
No -The only cover plate available for the PDL 641 is white (PDL641CWH).
The complete unit is available in both black (BK) and white (WH).
No, that is only available in Brushed Bronze - PDL683WPMBBZ and stainless steel - PDL683WPMMSS
PDL894MBK - single horizontal switched socket module
PDL894MABK - single horizontal socket module only
Alternative is ML2025I-WE
or the PDL695Pwh
what colour options for PDL661
black, white, mpb(polished brass), mss(stainless steel),mbbz(brushed bronze)
PDL695XMSS (and other metal plates)
4 gang horizontal switched socket with 3 x 10A sockets and 1 x 15A socket.
The part code is
PDL686MBBZ (covers the outside)
The plastic inserts are PDL 533WH
No, it is only available in white - PDL644CWH
Not Available - however the PDL894/15BK is available.
Yes, the part number is PDL694XXMBBZ
No, there is no Clipsal alternative available