Domae Switch 3P 63A

Domae - switch 3P 63 A switch disconnector

Catalogue Number: DCK12464
Domae Switch 3P 63A
Colour:
Colour: Per UOM Std.
  • 1 PCE 1

Specifications

hide show
Range of product
Domae
Range
Domae
Product or component type
switch disconnector
Device application
switch
Poles description
3P
Utilisation category
AC-22A conforming to IEC 60669-2-4
Standards
  • AS/NZS 60669.1
  • IEC 60068-1
  • IEC 60529
  • IEC 60669-2-4
    • [Ie] rated operational current
      63 A at 400 V AC 50/60 Hz
      [Ue] rated operational voltage
      400 V AC 50/60 Hz
      Network frequency
      50/60 Hz
      [Icm] rated short-circuit making capacity
      4.2 kA 400 V AC at 50/60 Hz
      [Icw] rated short-time withstand current
      1260 A during 300 ms
      [Ui] rated insulation voltage
      500 V AC 50/60 Hz
      [Uimp] rated impulse withstand voltage
      6 kV conforming to IEC 60669-2-4
      Control type
      toggle
      Local signalling
      ON/OFF indication
      Contact position indicator
      yes
      Mounting mode
      clip-on
      Mounting support
      DIN rail
      9 mm pitches
      6
      Height
      81 mm
      Width
      54 mm
      Depth
      74 mm
      Net weight
      230 g
      Mechanical durability
      50000 cycles
      Electrical durability
      20000 cycles
      Connections - terminals
    • tunnel type terminals (top or bottom) - 1 x 1...1 x 35 mm² - rigid without cable end
    • tunnel type terminals (top or bottom) - 1 x 1...1 x 35 mm² - flexible without cable end
    • tunnel type terminals (top or bottom) - 2 x 1.5...2 x 16 mm² - rigid without cable end
    • tunnel type terminals (top or bottom) - 2 x 1.5...2 x 16 mm² - flexible without cable end
    • tunnel type terminals (top or bottom) - 1 x 1...1 x 35 mm² - rigid with cable end
    • tunnel type terminals (top or bottom) - 1 x 1...1 x 35 mm² - flexible with cable end
    • tunnel type terminals (top or bottom) - 2 x 1.5...2 x 16 mm² - rigid with cable end
    • tunnel type terminals (top or bottom) - 2 x 1.5...2 x 16 mm² - flexible with cable end
      • Wire stripping length
        14 mm
        Tightening torque
        2.5-2.5 N.m
        IP degree of protection
        IP20 conforming to IEC 60529
        Tropicalisation
        2 conforming to IEC 60068-1
        Relative humidity
        95-95 % at 55-55 °C
        Ambient air temperature for operation
        -5-55 °C
        Ambient air temperature for storage
        -25-70 °C
        Sustainable offer status
        Green Premium product
        REACh Regulation
        Free of Substances of Very High Concern above the threshold
        REACh free of SVHC
        Yes
        EU RoHS Directive
        Compliant
        Toxic heavy metal free
        Yes
        Mercury free
        Yes
        RoHS exemption information
        Yes
        China RoHS Regulation
         Pro-active China RoHS declaration (out of China RoHS legal scope)
        Environmental Disclosure
        ENVPEP110309EN
        Circularity Profile
        ENVEOLI1103009EN

        Documents & downloads

        hide show
        Filter items
        • All

        • CAD Files and Packs

        • Technical Data Catalogues

        • Product Environmental

        • End of Life Manual

        Frequently Asked Questions

        hide show

        What is the part codse for a Domae 63Amp 2P switch dis-connector

         Use a DCK12461

        What is the part code for a 3 pole din rail mount main switch

         What curent rating ?
        The part code is 3 pole 40amp mains Isolating switch is A9S66340 or Domae DCK12646 63amp 3 pole

        How to map Mwh values to DNP slave export modules using ION Setup

        Goals and Symptoms

        On a meter without a Megawatt option, it is possible to link a Mwh value/register to DNP slave export module (or any other module needed) utilizing an arithmetic module and a periodic timer module.

        Causes and Fixes


        Log in to ION Setup.

        Save the template you currently have with the kWh settings somewhere on your system



        Exit the setup assistant (indicate that you don't want to connect to another meter)



        While holding the CTRL key, click on the device on your device (on the left hand side of the screen) > all the modules in the advanced mode should appear



        Select the Arithmetic Modules > Right click on the right hand side, and Insert a new module



        Double click on the module (should have an X going across it) and get into the setup screen (click OK when the warning shows up)



        Insert a new source to Source 1 by double clicking on the "Source 1:" (kWh > this can be found in Integrator module)




        Insert the "Period Timer" (or you could create your own timer) to the "CalcNow" section (the Period timer is a 1 second timer)



        Click on the "Setup Registers tab" > Insert the "S1/1000" formula into the ART# Formula 1



        Click on the "Output Registers tab" > Edit the "ART#Result 1" to Mwh

        Send



        Right click on the Arithmetic Module # and Rename it to "Mwh Scaling"



        Send

        Select the DNP Slave Export Modules > Right Click and Insert a new module



        Double Click on the new module > Edit the Source 1 > Select Arithmetic Modules > Mwh Scaling > Mwh



        You may then modify your Setup Registers as deemed fit.

        Click Send
        ________________________________________
        Original article#
        Date Created: September 3, 2010
        Last Revised: April 1, 2011
        Public
        Original Author: LA
        All content © 1992-2010 Schneider Electric


        Legacy KB System (APS) Data: RESL203390 V2.0, Originally authored by LaAd on 09/09/2010, Last Edited by LaAd on 04/02/2011
        Related ranges: ION8600, ION7550/ION7650, ION7300